GE ARTS Specification Sheet
Steel ROUND tAPeReD AReA lIGHtING POleS
20 tO 60 feet (6 tO 18 meteRS)
SUGGESTED LUMINAIRE APPLICATIONS
PF4S,
PF4T
PF1S,
PF1T
VLUF
HLUF
ULTS
DSMF, DSMT,
DSA
P54S
DCD
SPECIFICATION FEATURES
• Round tapered steel shaft
• Prime painted or galvanized finish
• Shaft lengths from 20 to 60 feet
• Single or multiple luminaire mounting
• Two top tenon sizes
• Top or side mounted brackets available
PSFA
PF1K
DMS
DMY
DMA
Mounting
2T and 4T
DCF
ORDERING NUMBER LOGIC (See Pole Selection Table for actual Ordering Numbers)
A
PRODUCT IDENT
(LUMINAIRE
USAGE)
X
A = Area T = Tapered S = Steel 20 = 20
R
POLE
CROSS
SECTION
X
R = Round
T
SHAFT
SHAPE
X
S
POLE
MATERIAL
X
20
NOMINAL
MOUNTING
HEIGHT (FT)
XX
25 = 25
30 = 30
35 = 35
39 = 39
45 = 45*
50 = 50*
60 = 60*
NOTE:
*Shafts over
40 feet may
be twopiece with
overlapping
joint (upper
portion 11
gauge;
lower portion gauge
as noted.)
2T
MOUNTING
XX
2T = 2-3/8-in. OD top tenon
(See illustration above)
4T = 4-in. OD top tenon
(See illustration above)
DB = Drill holes for mounting two Decashield®
luminaires at 90°*
DO = Drill holes for two Decashield at 180°*
QD = Drill holes for four Decashield*
SD = Drill holes for single Decashield*
TB = Drill holes for three Decashield at 90°*
TD = Drill holes for three Decashield at 120°*
NOTE: *Order round pole mounting
adapter separately.
NOTE: These mountings can be used with
any of the poles listed; substitute
the correct mounting designation
for XX in ordering number listed in
Selection Table.
NOTE: Drilling templates are the same
for Decashield®, Dimension®, and
DecasphereTM luminaires.
6.5
SHAFT DIMENSIONS
BOTTOM
SHAFT OD (IN.)
XXXX
6.5 = 6.5
7.0 = 7.0
8.0 = 8.0
8.5 = 8.5
9.0 = 9.0
9.5 = 9.5
10.0 = 10.0
11.0 = 11.0
12.0 = 12.0
12.5 = 12.5
11
GAUGE
XX
3 = 3
7 = 7
11 = 11
PP
FINISH
XX
GV = Galvanized
PP = Prime
Painted
(Standard)
NOTE: If galva-
nized nish is
required, substitute GV for PP in
ordering number
listed in Pole
Selection Table.
B1
OPTIONS
XX
B1 = One 18-in.
side mounted
bracket
B2 = Two 18-in.
side mounted
brackets at
180°
B4 = Four 18-in.
side mounted
brackets at
90°
E = Electrical
Festoon Box
NOTE: If any of
these options
is required, add
appropriate
designation(s) to
ordering number
listed in Pole
Selection Table.
P-14/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Steel ROUND tAPeReD AReA lIGHtING POleS
20 tO 60 feet (6 tO 18 meteRS)
POLE SELECTION TABLE
Shipped with pole: anchor bolts, anchor bolt covers, handhole cover, hardware, and anchor bolt circle template.
Shaft cap included with poles drilled for Decashield® luminaire mounting.
Nominal (sq ft) (sq ft) (sq ft) Bottom OD X Top OD X Data
Mounting 80 Weight 90 Weight 100 Weight Ordering Length X Thickness Approximate Item
Height (ft) MPHI (lbs) MPHI (lbs) MPHI (lbs) Number (in. X in. X ft-in. X gauge) Weight (lbs) Number
20 19.3 482 15.1 397 12.2 305 ARTS20XX5.911XX 5.9X3.1X20.0X11 135 6
20 24.2 605 19.3 482 15.6 390 20XX6.511XX 6.5X3.7X20.0X11 191 9
25 12.5 312 9.9 247 8.0 200 25XX5.911XX 5.9X2.4X25.0X11 152 6
25 20.3 507 16.2 405 13.1 327 25XX7.011XX 7.0X3.5X25.0X11 229 14
30 11.7 292 9.3 232 7.5 189 30XX6.611XX 6.6X2.4X30.0X11 190 9
30 18.9 552 14.9 422 12.0 342 30XX8.011XX 8.0X3.8X30.0X11 291 15
35 11.2 280 8.9 222 7.1 177 35XX7.311XX 7.3X2.4X35.0X11 235 4
35 18.9 472 15.1 377 12.2 305 35XX8.511XX 8.5X3.6X35.0X11 336 18
39 10.7 267 8.5 212 6.6 170 39XX7.811XX 7.8X2.4X39.0X11 271 15
39 17.2 452 13.5 362 10.8 292 39XX9.011XX 9.0X3.6X39.0X11 387 19
45 17.4 450 13.5 360 10.0 292 45XX10.011XX 10.0X3.7X45.0X11 492 20
45 28.5 525 23.0 425 19.0 350 45XX10.07XX 10.0X3.9X45.0X7 720 12
50 13.2 330 10.6 265 8.3 215 50XX10.011XX 10.0X3.0X50.0X11 511 20
50 20.5 407 16.5 322 13.6 292 50XX10.07XX 10.0X3.2X50.0X7 752 12
60 25.9 515 20.7 417 16.8 345 60XX12.07XX 12.0X3.8X60.0X7 1119 16
60 34.0 850 27.6 687 22.6 562 60XX12.53XX 12.5X4.5X60.0X3 1488 17
Max Recommended Total Load Shaft Dimensions
EPA EPA EPA Pole Base
REFERENCES
See Pole Accessories for Bracket Ordering Information
See Area Accessories for Round Pole Mounting Adapter
See Page P-20 for Option Information
See Page P-21 for Pole Base Data
See Page P-2 for Pole Selection Guidelines
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
2008/P-15
Loading...