GE 106822R, 106820, 840146200 User Manual
840146200
106671R, 169153
106822R, 106820
IRON
FER À REPASSER
PLANCHA
g
READ BEFORE USE
LIRE AVANT L’UTILISATION
LEA ANTES DE USAR
For Customer Assistance, call Customer Service at
1-877-207-0923 (US) or 1-877-556-0973 (Canada)
Pour l’assistance à la clientèle au Canada : 1-877-556-0973
Para comunicarse con Asistencia al Cliente en México: 01-800-343-7378
Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato.
840146200 Ev00 1/23/06 1:58 PM Page 1
When using your flatiron, basic safety precautions should always be followed, including
the following:
This product is intended for household use only.
Use the iron on an ironing board. Ironing on any other surface may damage that surface.
Do not iron or vertical steam clothes that are being worn.
Do not use vertical steam in the direction of people or pets.
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. To protect against risk of electric shock, do not immerse the iron in water or other liquids.
3. The iron should always be turned to OFF ( O ) before plugging or unplugging from outlet. Never
yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
4. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Fully
retract cord within unit or loop cord loosely around iron, as applicable, when storing.
5. Always disconnect iron from electrical outlet when filling with water or emptying and when not
in use.
6. Do not operate iron with a damaged cord or if the iron has been dropped or damaged.
To avoid the risk of electric shock, do not disassemble the iron. Call our toll-free customer assistance number for information on examination and repair. Incorrect reassembly can cause a
risk of electric shock when the iron is used.
7. Close supervision is necessary for any appliance being used by or near children. Do not leave
iron unattended while connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you
turn a steam iron upside down – there may be hot water in the reservoir.
SPECIAL INSTRUCTIONS
1.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for
less amperage may overheat. Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
2
IMPORTANT SAFEGUARDS
Shock Hazard
• Do not immerse this appliance in water or other liquid.
• This appliance has a polarized plug (one wide blade) that reduces the risk of electrical shock.
The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the
plug by modifying the plug in any way or using an adaptor. If the plug does not fit, reverse
the plug. If it still does not fit, have an electrician replace the outlet.
WARNING
SAVE THESE INSTRUCTIONS!
OTHER CONSUMER SAFETY INFORMATION
840146200 Ev00 1/23/06 1:58 PM Page 2
3
1. Spray/Blast Buttons (see inset)
2. Adjustable Steam Switch (see inset)
3. Water Tank Opening
4. Spray Nozzle
5. Water Window
6. Temperature Control Dial
7, Soleplate
8. Power ON/Auto Shutoff Reset
Button/Light
9. Heel Rest
10. Cord
11. Cord Release Button
(on select models)
12. Retractable Cord
(on select models)
• Steam vents should be cleaned before first use.
• During the first use of the iron, it may appear to smoke. This will stop and does not
indicate a defect or hazard.
• To clean steam vents before first use, prepare iron for steam ironing, then iron over
an old cloth for a few minutes while letting the iron steam. Press the Blast button
several times to clean the vents. Then follow the Self-Cleaning instructions.
• Many irons spit or sputter during the
first few uses with tap water. This happens
as the
steam chamber becomes conditioned. This will stop after a few uses.
Blast Spray
BEFORE FIRST USE
PARTS AND FEATURES
2
3
4
5
6
7
8
9
1
10
1
2
11
12
840146200 Ev00 1/23/06 1:58 PM Page 3
Loading...