GE 59797 User Manual

Instructions:
1) Shut off power to the circuit at fuse box or circuit breaker. Remove wall plate and test to be sure power has been completely disconnected.
2) Remove old switch and outlet from wall box and disconnect wires. If metal tab between terminal screws was removed from old device,
remove
from new switch.*
3) Disconnect wires from old device. Be sure wires are stripped to
3M".
Form wires 3/4 around terminal screws (do not overlap).
4) Connect wires to new switch as shown, forming wire clockwise 3/4 around screw. Tighten screws securely. Connect grounding (green or bare) wire to GREEN screw on new switch, and tighten screw.
5) Insert newly wired
switch into the wall
box. Fasten
with mountin
screws
provided.
6) Attach a standard 2-outlet wall
plate.
Restore
power.