GB BF90 User Manual

WARRANTY: GB ELECTRICAL, INC. warrants its

products against defects in workmanship and materi­als for 1 year from date of delivery to user. Chain is not
warranted. Warranty does not cover ordinary wear and
tear, abuse, misuse, overloading, altered products or
use of improper fluid.

WARRANTY RETURN PROCEDURE: When question
of warranty claim arises, send the unit to the nearest
GB Authorized Service Center for inspection, trans­portation prepaid. Furnish evidence of purchase date.
If the claim comes under the terms of our warranty the
Authorized Service Center will REPAIR OR REPLACE
PARTS AFFECTED and return the unit prepaid.

PARTS AND SERVICE: For quality workmanship and
genuine GB ELECTRICAL parts, select an Authorized
GB Service Center for your repair needs. Only
repairs performed by an Authorized Service Center
displaying the official GB Authorized sign are backed
with full factory warranty. Contact GB Electrical
[phone] for the name of the nearest GB
Authorized Service Center.

REPAIR AND SERVICE INSTRUCTIONS: For repair service and parts contact your nearest GB ELECTRICAL
Service Center.The Service Center will provide complete and prompt service on all GB ELECTRICAL products.

GB Electrical, Inc.

An Applied Power Company

6101 N. Baker Road, Milwaukee, WI 53209
Phone: [phone] FAX [phone]

RPS-0123 Rev. A 03/07

Gardner

Bender

IMPORTANT: RECEIVING INSTRUCTIONS

Visually inspect all components for shipping damage.
If any shipping damage is found, notify carrier at once.

Shipping damage is NOT covered by warranty. The
carrier is responsible for all repair or replacement
costs resulting from damage in shipment.

IMPORTANT: When using shoes for up to 2" EMT, use washer and pin.

When using a 2" shoe, a strap is used with the pin (no washer). Order the strap separately.

Drill 1⁄4” diameter hole through
both walls of frame tube

Attach insert to bender frame with

two spring pins through 1⁄4” diameter

hole drilled in frame tube

15

⁄16”

90˚ ± 15˚

Retaining

Lever

Conversion Kit required to retrofit BF1000 & BF1100 bender set with new shoe retainer assembly.

①

②

Instruction

Sheet

Conversion Kit

BF90

PARTS AND SERVICE: For quality workmanship and genuine GB ELECTRICAL parts, select an Authorized GB Service Center for your repair needs.Only

repairs performed by an Authorized Service Center displaying the official GB Authorized sign are backed with full factory warranty.Contact GB Electr ical [phone] for the name of the nearest GB Authorized
Service Center.