Read all provided instructions before first usage!
Model and attachments are subject to change!
Carefully read all provided instructions before you start running
the appliance and pay regard to the warnings mentioned in the-
se instructions.
Contents
Safeguards 17
General safety instructions 17
Important safeguards for all electrical appliances 18
Hot surfaces – Risk of burns 19
Features of your Design Kettle Advanced Pro 20
First use 21
Operating your Design Kettle Advanced Pro 21
Safety boil dry protection 24
Care and cleaning 24
Storage 25
Waste disposal 25
Warranty 26
Information and Service 26
16
Dear customer!
Congratulations on your new Gastroback Design Kettle Advanced Pro. The electronic
control panel offers five different settings for brewing optimal tea and coffee. This variable temperature control together with the „KEEP WARM“-Technology and the selection of
premium materials, make your Design Kettle Advanced Pro unique.
These instructions for use will inform you about the various functions and features which
makes it easy to use your new kettle.
We hope that you will enjoy your Design Kettle Advanced Pro.
Your Gastroback GmbH
Safeguards
• Carefully read all instructions before operating this appliance and save for further reference.
• This appliance is not designed to be used by persons (including children) with limited
physical, sensory or mental capabilities, or lacking in experience and/or knowledge. This
is unless they are supervised by a person responsible for their safety, or they are instructed
by such a person on how to use the appliance.
• Do not attempt to use this appliance for any other than the intended use, described in
these instructions. Any other use, especially misuse, can cause severe injuries or damage
by electric shock, heat or fire.
• Any operation, repair and technical maintenance of the appliance or any part of it
other than described in these instructions may only be performed at an authorised service
centre. Please contact your vendor.
General safety instructions
• Only use the appliance for the intended purpose. Any non-appropriate use and misusage can cause damages and heavy personal injuries through voltage, fire and moving units.
Only proceed the appliance as described in the directions. Do not use the appliance in
moving vehicles or boats. Only use the appliance indoors.
• Close supervision is necessary when the appliance is used near young children. Do not
let young children play with any parts of the appliance. The appliance is not intended for
use by children or infirm persons without supervision. For storage always keep the entire
appliance dry and clean and where young children cannot reach it. Do not place any
hard and/or heavy objects on the appliance or any part of it.
• Always place the appliance on a stable, level, dry, heat-resistant and easy accessible
surface. Do not place the appliance near the edge of the table or counter or on an inclined surface. Ensure, that the power base will not tilt or wobble before placing the kettle
on it. Do not place any cloth or tissue beneath or on the appliance to avoid any risk of
fire, electric shock and overheating. Always keep the table or counter clean and dry and
immediately wipe off spilled liquids.
• During operation keep the appliance in an appropriate distance of at least 20 cm
on each side to furniture, walls, boards, curtains and other objects. Do not operate the
appliance near any heat-sensitive or moisturesensitive materials or under boards to avoid
damage caused by steam and condensate.
• The kettle is heated electrically. Do not place the appliance and any part of it on or near
hot surfaces, (i.e. burner, heater or oven). The appliance and any part of it may never
touch hot surfaces.
• Do not leave the power base unattended, when connected to the power supply. Always
unplug when the appliance is not in use and before cleaning or moving the power base.
Always the kettle to cool down before cleaning or filling.
• Do not use this appliance to boil any other liquids or foodstuffs others than pure drinking
water without any additional ingredients.
• Never use abrasive cleaners, cleaning pads or any hard and sharp objects (i.e. metal
scouring pads) for cleaning. Clean the kettle and power base with a damped sponge or
tissue and carefully dry the power base and exterior of the kettle after cleaning. Do not
handle the appliance or any part of it with violence. The lid is easily opened by pressing
the opening button. Do not lift or carry the kettle by the lid. Always use the handle for
moving the kettle.
• Do not immerse the kettle base, switch area, power base or power cord in water, or
allow moisture to come in contact with these parts. Never place the appliance or any part
of it in an automatic dishwasher.
• This appliance is for household use only and not intended for use in moving vehicles or
outdoors. Do not operate or store the appliance in humid or wet areas. During operation a
little amount of moisture could condensate on the power base. This is no indication for any
failure.
Important safeguards for all electrical appliances
Care must be taken when using any electrical appliance. Please adhere to the following
precautions.
• Ensure that the voltage rating of your mains power supply corresponds to the voltage
requirements of the appliance (230 - 240 V, 50 Hz, AC, rated for 16 A). Always connect
the appliance directly to a separately protected mains power supply wall socket with
protective conductor (earth/ground) connected properly. Do not use any extension cord or
multi socket outlet. The installation of a residual current safety switch with a maximum rated residual operating current of 30 mA in the supplying electrical circuit is recommended.
If in doubt, contact your electrician for further information.
• In various foreign countries, the specifications for power supplies are subject to incompatible norms. Therefore it is possible that power supplies in foreign countries do not meat
18
the requirements for safe operation of the appliance. Thus, before operating the appliance
abroad, ensure that safe operation is possible.
• Always handle the power cord with care. The power cord may never be knotted, twisted
or squeezed. Do not pull or strain the power cord. Do not let the plug or power cord hang
over the edge of the table or counter. Take care that no one will pull the appliance by the
power cord, especially when young children are near. Always grasp the plug to disconnect the power cord from the power outlet. Do not touch the plug or power base with wet
hands, when the plug is connected to the power supply.
• Before operation completely unwind the power cord, insert the power cord in the gap on
the bottom of the power base, and ensure that the power base will not tilt or wobble during operation. Do not place the kettle or power base on the power cord.
• Always switch off the kettle and unplug the power base from the power outlet when not
in use and before moving or cleaning the power base. Do not leave the power base unattended while connected to the power supply. Never leave the appliance unattended when
in operational mode.
• When the power cord warms up during operation or is likely to be damaged, it must be
replaced by an authorised Service Centre. Do not attempt to repair the power cord!
• Do not immerse the kettle, power base or power cord in water or any other liquid. Do
not spill or drip any liquids on the power base, power cord or switch area of the kettle to
avoid risk of fire and electric shock. When liquids are spilled on the exterior of the appliance or condensate has built up on the power base, immediately switch OFF the kettle,
unplug the power base and dry the appliance.
Hot surfaces – Risk of burns
The exterior of the Design Kettle Advanced Pro will get very hot during operation. In addition, beware of steam and hot condensate during operation and even some minutes after
switching off the appliance, especially when opening the lid or pouring out water.
The kettle is still hot, even some minutes after switching off. Do not touch hot surfaces (exterior of the water container and lid) while the appliance is in use. Always use the soft grip
handle for moving the kettle. Always use the opening button for opening the lid.
Do not place the kettle on any heat-sensitive objects, while it is hot. Never place any
heat-sensitive objects in or on the kettle.
Close supervision is important, when moving the kettle immediately after switching off.
Take care to hold the kettle level, especially when filled to the maximum level.
• For operation place the appliance on a dry, stable, heat-resistant, water-resistant and
level surface (i.e. glass, ceramics, stone). Never place any clothes or other objects on
or under the appliance during operation to avoid overheating. Always let the kettle cool
down to room temperature before cleaning.
• Always keep your hands, face and arm as well as any clothing and other objects away
from the lid and spout during operation to avoid scalds and damage. Beware of steam
and hot condensate, when opening the lid. Always keep the lid closed, when operating
the kettle. Otherwise power consumption increases significantly and, additionally, the
automatic switching off of the heating elements will not work out. Ensure all persons stay in
sufficient distance to the appliance during operation.
Features of your Design Kettle Advanced Pro
Removable scale lter
1,7 litre stainless
steal water container
Water window
Soft opening lid with
viewing window
Lid release button
5 temperature settings
Variable temperatures
for different teas and
coffee
KEEP WARM function
START/CANCEL button
Multi-directional power base
with cord storage
• Safety auto cut off
• Start button (2 signal tones)
• Key press tones (each with 1 signal tone)
• Cut off signal (3 signal tones)
• Boil dry protection - audio warning
• Fast boil, 2.200 - 2.400 W
20
First use
Remove and safely discard any packaging material or promotional labels attached to your
kettle. It is recommended that before first use to fill the kettle to the maximum level with
cold tap water (drinking quality), bring to the boil by selecting the BOIL 100° button, then
pour the water out. Your kettle will only operate when positioned on the power base. The
kettle will automatically switch off when the water has reached the selected temperature.
CAUTION: The lid opens automatically just by pressing the opening button. Ensure that
there are no objects in the interior of the kettle. Do not immerse the kettle base, switch
area, power base or power cord in water, or allow moisture to come in contact with these
parts.
NOTE: Your kettle will only operate when positioned on the power base, the connector of
the power base is placed into the socket outlet and the appliance is switched on. The kettle
will automatically switch off, once the water is boiling. Too little water will result the kettle
switches off before the water starts boiling.
Operating your Design Kettle Advanced Pro
CAUTION! Only fill with pure drinking water. Do not fill any other liquids or foodstuffs into
the water container and do not add any additional ingredients, such as spices or flavours.
Do not place any foreign objects in the water container. Do not drip or spill any liquids on
the exterior of the kettle or on the power base.
Ensure the kettle is filled with the appropriate amount of water (water level between 500/
MIN and 1700/MAX) before switching on the appliance.
WARNING! Do not use any extension cord or multi socket outlet to avoid risk of fire and
electric shock. Always connect the appliance directly to a separately protected mains power supply wall socket with protective conductor (earth/ground) connected properly (See
„Important safeguards for electrical appliances“).
Do not operate the appliance on an inclined surface, to avoid scalding and damage by
boiling water overflowing the brim of the kettle.
Immediately switch off and unplug the appliance, if water leaks out of the kettle.
1. Prepare the power base for use.
Completely unwind the power cord from the cord storage and insert it in the gab on the
bottom of the power base. Place the power base on an appropriate surface (level, dry,
water-resistant and heat-resistant). During operation, always keep the appliance away
from other objects: leave at least 20 cm of free space on each side and 1 m of free space
above the appliance. Ensure, that the power base will not tilt or wobble.
2. To fill the kettle, remove the kettle from the power base and open the lid by pressing the
lid release button. Fill with the desired amount of water. Always fill the kettle between the
minimum (MIN 500) and maximum (MAX 1700) marks on the water window. Too little
water will result in inaccurate temp readings in the kettle or switching off before the water
has reached the selected temperature.
WARNING! Do not overfill the water container beyond the maximum water level mark
1700/MAX (1.7 litre). Otherwise boiling water could splash from the kettle during operation, causing injuries to persons and damage. Only use clear water without any ingredients.
Dry spilled water immediately.
3. Ensure the lid is closed and locked firmly into place. Position the kettle securely onto
the power base. Insert the power plug into a 220/240 power outlet and switch on.
The START/CANCEL and 100° BOIL button surrounds will illuminate in white for one
minute. A signal tone will sound for two seconds. The START/CANCEL button surround will
automatically switch off after one minute if not selected.
NOTE: If the START/CANCEL button is pressed (before selecting a temperature button), the
START /CANCEL button surround will illuminate in red and the 100º BOIL button surround
will illuminate and the kettle will start heating.
4. Select the desired setting by pressing one of the five temperature buttons (80°, 85°,
90°, 95°, 100°). The selected button and the START/CANCEL button surround will illuminate in white.
Would you like for example water for „GREEN TEA“ heat up, press the „GREEN TEA“- button. This button lights up blue together with the start button. Then press the button „START“.
This lights up red and the boil process begins. Is the boil process finished, sounds a three
signal tones, the „START“ - and the „GREEN TEA“ key expire.
See the following table for the various settings.
Variations SettingsTo l er an c e
GREEN TEA
WHITE TEA
OOLONG TEA
COFFEE
BOIL/
BLACK TEA
80°C
85°C
90°C
95°C
100°C
+/-5°C
+/-5°C
+/-5°C
+/-5°C
-5°C
22
Note: Different teas need different
water temperatures to bring out
their best taste and quality. You will
find a recommend variable temperature control table on page 27.
5. Press the START/CANCEL button and the surround will illuminate in red, the selected
temperature button surround will illuminate and the kettle will start heating. Do not remove
the kettle from the power base during operation. Ensure the kettle has switched off after the
water has boiled or the selected temperature has been reached before removing the kettle
from the power base. If the kettle is removed from the power base during the KEEP WARM
function the kettle will automatically switch off.
6. If the KEEP WARM function has been selected, the KEEP WARM button surround will
remain illuminated in red, the selected temperature button surround will remain illuminated
in light blue, and the kettle will maintain the desired setting for 20 minutes.
The KEEP WARM function can be used before, during or on completion
of the water heating. When the water has reached the selected Celsius
temperature, the KEEP WARM function will hold the selected temperature for 20 minutes. If the 100° button is selected when using the KEEP
WARM function, the boiled water will remain at approximately 95°
Celsius for 20 minutes. To activate the KEEP WARM function, first press
the desired water temperature button from the five options on the control panel. Then press
the KEEP WARM button, followed by the START/CANCEL button to commence heating
the water. Alternatively, the KEEP WARM button can be activated at any time during the
heating cycle and/or within one minute after the heating cycle has completed.
If the kettle is removed from the power base during the KEEP WARM function the kettle will
automatically switch off.
Note: If temperature is changed during the KEEP WARM function, the START/CANCEL
button surround will illuminate in red.
7. If further heating of the kettle is not required, switch off at the power outlet, unplug the
power cord and empty the water from the kettle. Replace the kettle onto the power base
and close the lid.
NOTE: The default temperature setting of the kettle when plugged on at the power outlet is 100°.
– When the kettle is switched off at the power outlet and switched back on, it will automatically default to the 100° temperature setting.
– When the kettle remains switched on at the power outlet and different temperature settings have been selected, the kettle will default to the last selected temperature setting.
WARNING: Do not open the lid during and after operation. This may result in boiling
water splashing from the kettle. Pour all the hot water from the kettle before opening the lid
to refill.
23
Safety boil dry protection
The kettle is fitted with a safety device, which protects against overheating should the
appliance be operated with insufficient water. If this occurs the kettle will stop heating and
a continuous tone will sound, indicating a dry boil error has occurred.
The START/CANCEL and KEEP WARM button surrounds will also flash in red. Switch off
at the power outlet and allow kettle to cool down before refilling. The safety device will
automatically reset when the kettle has cooled sufficiently.
WARNING: This appliance is designed for boiling or heating of drinking quality water
only. Never use it to heat or boil any other liquids or foodstuffs. Never insert tea or coffee
into the kettle. The lid should always be locked securely into the closed position before use.
Care and cleaning
Always unplug the appliance from the power outlet before cleaning.
CAUTION! To avoid damage, do not use any chemicals, disinfectants, steel wool, abrasive
cleaners or hard or sharp utensils to clean the appliance. Handle with care. Do not place
or immerse the kettle base, power base or power cord in any liquids. Do not spill any
liquids on the kettle base, switch area, power base or power cord. Do not place the kettle
or power base in an automatic dishwasher.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior and water window to discolour
over time. Mineral deposits may be removed by using a proprietary kettle descaler available from most leading supermarkets, department stores and hardware stores.
Alternatively:
1. Fill the kettle until two-thirds full with 1 part vinegar and 2 parts water. Boil and allow to
stand overnight.
2. Empty the solution from the kettle. Fill the kettle with clean water, bring to boil and
discard the water. Repeat and the kettle will be ready for use.
Cleaning the kettle
The outside of the kettle should be wiped with a damp cloth then polished with a soft, dry
cloth.
NOTE: The filter could become damaged with time, so please check regularly and replace
if found damaged.
NOTE: Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the kettle.
WARNING: To prevent damage to the appliance, do not use alkaline cleaning agents
when cleaning. Use a soft cloth and mild detergent.
24
WARNING: Do not remove the diffuser ring located on the base inside the kettle.
WARNING: Never immerse the kettle base, power base, power cord or power plug in
water, or allow moisture to come in contact with these parts.
Decalcifying the kettle
CAUTION: Never use abrasive cleaners, any chemicals, disinfectants, cleaning pads or
any sharp utensils (i.e. metal scouring pads) for cleaning. Handle the kettle and power
base without violation. Never place the appliance or any part of it in an automatic dishwasher. Depending on the water hardness in your residential area, mineral deposits build
up in the water container, causing decolouration and increasing energy loss. Therefore we
recommend to decalcify the water container regularly.
1. Combine ca. 400 to 500 ml vinegar and 800 to 1000 ml water, fill this solution in the
kettle and boil. Make sure, the room is well ventilated.
2. Switch OFF and unplug. Allow to stand overnight.
3. Empty the solution from the kettle. Fill the kettle with clean water to water level mark
1700/MAX, bring to boil and discard the water.
4. Thoroughly rinse the interior of the water container with clear water. After that the kettle
will be ready for use.
Storage
Store the entire appliance (including the power base and operating instructions) on a
clean and dry surface, where it may not tilt or fall and no other objects could fall on it and
where it is safe from frost and inadmissible strain (mechanical or electric shock, heat) and
where it is out of reach of young children. Do not place any hard or heavy objects on the
appliance or any parts of it.
Always switch off the kettle and unplug the power base, when the appliance is not in use.
Empty remaining water and place the kettle on the power base to protect the connector
pins in the power base from dust. When the appliance is not in use for a long period of
time, decalcify the interior of the water container (See „Decalcifying the Water Container“). When required, wind the power cord round the cord storage in the bottom of the
power base.
Notes for disposal
Dispose of the appliance and packaging must be effected in accordance with the
corresponding local regulations and requirements for electrical appliances and packaging. Please contact your local disposal company.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection
facilities. Contact your local government for information regarding the collection systems
available.If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and
25
well-being.When replacing old appliances with new once, the retailer is legally obligated to
take back your old appliance for disposal at least for free of charge.
Warranty
We guarantee that all our products are free of defects at the time of purchase.
Any demonstrable manufacturing or material defects will be to the exclusion of any further
claim and within warranty limits of the law free of charge repaired or substituted. There is no
Warranty claim of the purchaser if the damage or defect of the appliance is caused by inappropriate treatment, over loading or installation mistakes. The Warranty claim expires if there is
any technical interference of a third party without an written agreement.
The purchaser has to present the sales slip in assertion-of-claim and has to bear all charges of
costs and risk of the transport.
Information and Service
Please check www.gastroback.de for further information. For technical support, please
contact Gastroback Customer Care Center by phone: +49 (0)4165/22 25-0 or e-mail
info@gastroback.de.
26
Variable temperature control table
GREEN TEAS
75° - 85°
ARABIAN NIGHT
ASATSUYU
BANCHA
CEYLON GREEN
CHINA CHUN MEE
DARJEELING GREEN
GENMAICHA
GUNPOWDER
GYOKURO
JASMINE
NEPAL GREEN TEA
PEACH
SENCHA
SHINCHA
WHITE TEAS
80° - 90°
APPLE
BLACK CHERRY
BLACKCURRANT
CHINA YIN ZHEN
COCONUT
ELDERFLOWER
GINGER
LEMON
LYCHEE
MANGO
ORANGE
STRAWBERRY
OOLONG TEAS
85° - 95°
MOST OOLONG TEAS
COFFEE / TEA
95°
ALL INSTANT COFFEE
CEYLON
CHINA LAPSANG SOUCHONG
CHINA ROSE
CHINA YUNNAN
DARJEELING
EARL GREY
ENGLISH BREAKFAST
INDIAN CHAI
IRISH BREAKFAST
KEEMAN
NILGIRI
ORANGE PEKOE
PASSIONFRUIT
RUSSIAN SAMOVAR
VANILLA
VIENNESE BLEND
BOIL / BLACK TEAS
100°
ASSAM
ANCIENT TREE
BAGGED TEA
CHAI
CHAMOMILE
CINNAMON
GOLDEN YUNNAN
HERBAL
HUA
LAPSANG SOUCHONG
LEMONGRASS
KENYA
PEPPERMINT
PU-ERRH
RED
ROOIBOS
SPEARMINT
WHOLE LEAF
WULONG
Visit our special page www.tee.gastroback.de and learn more about tea.
Gastroback GmbH
Gewerbestraße 20
21279 Hollenstedt / Germany
www.gastroback.de • www.tee.gastroback.de
info@gastroback.de
20121213
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.