Garmin STRIKER 7cv, STRIKER 7sv Level mounting model [fi]

Printing a Mounting Template

NOTICE

It is not recommended that you print a mounting template on your own. Use the template that came in the product box.
If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,

you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,
may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your
boat.

Select File > Print.

1

➎

➌

➍

➊

➋

Select None for Page Scaling ➊.

2

Ensure the check mark is next to Auto-Rotate and Center ➋.

3

Drag the arrow ➌ to the right, to view page 2 in the window below.

4

Verify that the paper size is larger than the template ➍.

4

In this example, the paper is not larger than the template.
If the paper size is not large enough, select Properties ➎ and select a Page Size that is larger than the template.

5

NOTICE

Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow
these instructions.

89 mm
(3 1/2 in.)

STRIKER™ 7 Series

4.50 mm
(3/16 in.)

12.7 mm
(1/2 in.)

218.3 mm
(8 9/16 in.)

October 2020 190-01950-05_0BPrinted in Taiwan