®
nüvi
2405 series
quick start manual
n
üvi models: 2405, 2415, 2445, 2455, 2475, 2495
September 2011 190-01355-01_0C Printed in Taiwan
nüvi 2405 Quick Start Manual 1
Getting Started
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Setting Up Your Device
When using your device for the rst time,
complete the following tasks.
Connect the device to vehicle power (page
1
2).
Mount the device (page 2).
2
Register the device (page 4).
3
Check for updates.
4
• Software updates (page 4).
• Free map update (page 4).
Download the full owner’s manual (page 4).
5
2 nüvi 2405 Quick Start Manual
‹ WARNING
Connecting the Device to Vehicle
Power
This product contains a lithium-ion battery.
To prevent the possibility of personal injury or
product damage caused by battery exposure
to extreme heat, remove the device from the
vehicle when exiting or store it out of direct
sunlight.
Before mounting the device, see the Important
Safety and Product Information guide for
information about laws pertaining to windshield
mounting.
Charge your device as you drive before using it
on battery power.
Plug the vehicle power cable ➊ into the
1
USB port
Press the suction cup ➍ to the windshield.
2
‹ WARNING
Notice
➋ on the device ➌.
While pressing, ip the lever ➎ back toward
3
the windshield.
➌
➏
➍
➋
➎
➊
About myDashboard
You can use myDashboard to register your
device, check for software and map updates,
access product manuals and support, and more.
Setting Up myDashboard
Connect the mini-USB cable ➊ to the mini-
1
USB port
➋ on the device (page 2).
Snap the mount ➏ onto the suction cup.
4
Connect the mini-USB cable to the USB port
Fit the bottom of your device into the mount.
5
Tilt your device back until it snaps into place.
6
Plug the other end of the vehicle power
7
cable into a power outlet in your vehicle.
If necessary, connect the external antenna to
8
the vehicle power cable and secure it to the
windshield using the suction cups.
nüvi 2405 Quick Start Manual 3
2
on your computer.
Go to www.garmin.com/dashboard.
3
Follow the on-screen instructions.
4
➊
➋