All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express permission of
Garmin.
dēzlCam™, ecoRoute™, Garmin eLog™, Garmin Express™, Garmin Real Vision™, myGarmin™, myTrends™, trafficTrends™, nüMaps Guarantee™, and nüMaps Lifetime™ are trademarks of Garmin
Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. Foursquare® is a trademark of Foursquare Labs,
Inc. in the U.S. and in other countries. microSD™ and the microSDHC logo are trademarks of SD-3C, LLC. Windows®, Windows Vista®, and Windows XP® are registered trademarks of Microsoft
Corporation in the United States and other countries. Mac® is a trademark of Apple Inc, registered in the USA and other countries. TruckDown® is the trademark of TruckDown Info International,
Inc. HD Radio™ and the HD logo are trademarks of iBiquity Digital Corporation. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and foreign patents.
Other trademarks and trade names are those of their respective owners.
• Adjust the volume (Adjusting the Volume, page 2) and
display brightness (Adjusting the Screen Brightness,
page 2).
• Set up a vehicle profile for your truck.
• Navigate to your destination (Starting a Route, page 4).
Installing the Dash Camera Memory Card
Before the device can record video from the integrated dash
camera, you must install a camera memory card. The camera
requires a microSD™ or microSDHC memory card up to 64GB
with a speed rating of class 4 or higher. You can use the
included memory card, or you can purchase a compatible
memory card from an electronics supplier.
Insert a memory card À into the camera memory card slot Á.
1
NOTE: If you install the memory card into the incorrect slot,
the camera cannot record video.
Open the lever Â, press the suction cup to the windshield,
2
and flip the lever back toward the windshield.
The lever must be oriented toward the top of the windshield.
Extend the suction cup arm Ã.
3
If necessary, rotate the mount so the Garmin® logo faces
4
right-side up.
Plug the vehicle power cable Ä into the port on the mount.
5
Press it in until it clicks.
2
Mounting and Powering the dēzlCam Device
in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause interference with some
internal medical devices, including pacemakers and insulin
pumps. Keep the device and its mount away from such medical
devices.
NOTICE
Both the device and its mount contain magnets. Under certain
circumstances, magnets may cause damage to some electronic
devices, including hard drives in laptop computers. Use caution
when the device or its mount is near electronic devices.
Before you use your device on battery power, you should charge
it.
Press the mount À onto the suction cup Á until it snaps into
1
place.
Place the back of the device onto the mount.
6
Plug the other end of the vehicle power cable into a power
7
outlet in your vehicle.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites. in
the status bar indicates the satellite signal strength. Acquiring
satellites can take several minutes.
Turn on the device.
1
Wait while the device locates satellites.
2
If necessary, go outdoors to an open area, away from tall
3
buildings and trees.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status
Bluetooth® technology status (appears when Bluetooth is
enabled)
Vehicle profile indicator
Getting Started1
HOSHours of service status shortcut
Garmin eLog™ status. Select to view the current ELD
information. When the icon is blue, the device is connected
to the Garmin eLog app.
Current time
Battery status
Connected to Smartphone Link
Temperature
Unread myGarmin™ messages
Dash camera recording status
Dash Camera
Aligning the Camera
WARNING
Do not attempt to align the camera while driving.
You should align the dash camera each time you mount the or
reposition the device.
Select Settings > Camera > > Alignment.
1
Tilt the device and rotate the camera to align the camera.
2
The crosshairs should point straight ahead, and the horizon
line should be centered between the top and bottom of the
screen.
Using the On-Screen Buttons
• Select to return to the previous menu screen.
• Hold to quickly return to the main menu.
• Select or to see more choices.
• Hold or to scroll faster.
• Select to see a menu of options for the current screen.
Entering and Exiting Sleep Mode
You can use sleep mode to conserve battery power when your
device is not in use. While in sleep mode, your device uses very
little power and can wake instantly for use.
TIP: You can charge your device faster by putting it in sleep
mode while charging the battery.
Press the power key À.
Turning Off the Device
Hold the power key until a prompt appears on the screen.
1
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
sleep mode.
Select Off.
2
Dash Camera Recording
NOTICE
Legal Restrictions
In some jurisdictions it could be considered an invasion of
privacy rights to take or publicly display photographs or videos
of people or their vehicles using this product. It is your
responsibility to know and comply with applicable laws and
rights to privacy in your jurisdiction.
Before you can record video using the integrated dash camera,
you must install a camera memory card (Installing the Dash
Camera Memory Card, page 1).
By default, the device immediately starts recording video when it
turns on. It continues recording, overwriting the oldest, nonsaved video until it turns off. While recording, the LED is solid
red.
The device records continuously until the device is turned off or
video recording is disabled.
Saving a Video Recording
By default, the device uses a sensor to detect possible
accidental collisions and saves video footage before, during,
and after the detected event.
You can also manually save video at any time.
While recording, select the camera key À.
1
Adjusting the Volume
Select Volume.
1
Select an option:
2
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
Enabling Automatic Volume
Your device can increase or decrease the volume automatically
based on the level of background noise.
Select Volume > .
1
Select Automatic Volume.
2
Adjusting the Screen Brightness
Select Settings > Display > Brightness.
1
Use the slider bar to adjust the brightness.
2
The device saves a photo and the video footage before,
during, and after you select the key. The LED flashes red
while the device is saving video footage.
Select the camera key again to extend the saved recording
2
time (optional).
A message indicates the amount of video footage to be
saved.
The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Videos
and Photos on Your Computer, page 3).
Taking a Photo
You can take still photographs with this device. By default, the
device stores time and location information with the photo.
Select Apps > Dash Cam > .
The device takes a photo and saves it to the memory card.
Starting and Stopping Dash Camera Recording
Select Apps > Dash Cam.
1
2Dash Camera
Select an option:
2
• To stop recording, select .
The LED is solid green while recording is stopped.
TIP: By default, recording starts automatically the next
time you turn on the device. You can disable this option in
the camera settings (Camera Settings, page 19).
• To start recording, select .
The LED is solid red while the dash camera is recording.
Camera Key Tips
The camera key provides quick access to several dash camera
functions.
• Select the camera key to save a video recording and capture
a photo.
• While saving a video recording, select the camera key to
extend the saved recording time.
• While recording video, hold the camera key for several
seconds to stop recording.
• While recording is stopped, select the camera key to start
recording.
Viewing Videos and Photos
NOTE: The device stops recording video while you view videos
or photos.
Select Apps > Gallery > Yes.
1
Select a video or photo.
2
The device displays the video or photo. Videos start playing
automatically. If the video or photo includes location
information, a map shows the location.
Videos and Photos on Your Computer
The Garmin Dash Cam Player application allows you to view,
save, and edit recorded videos on your computer. You can also
view and overlay time, date, location, and speed information
recorded with the video. Go to www.garmin.com/dashcamplayer
for more information.
Turning Audio Recording On or Off
The device can record audio using the integrated microphone
while recording video. You can turn audio recording on or off at
any time.
Select Settings > Camera > Record Audio.
Deleting a Video or Photo
Select Apps > Gallery > Yes.
1
Select a video or photo.
2
Select > Yes.
3
Vehicle Profiles
WARNING
Entering your vehicle profile characteristics does not guarantee
that your vehicle's characteristics will be accounted for in all
route suggestions or that you will receive the warning icons in all
cases. Limitations may exist in the map data such that your
device cannot account for these restrictions or road conditions in
all cases. Always defer to all posted road signs and road
conditions when making driving decisions.
Routing and navigation are calculated differently based on your
vehicle profile. The activated vehicle profile is indicated by an
icon in the status bar. The navigation and map settings on your
device can be customized separately for each vehicle type.
When you activate a truck vehicle profile, the device avoids
including restricted or impassable areas in routes based on the
dimensions, weight, and other characteristics you entered for
your vehicle.
Adding a Vehicle Profile
You should add a vehicle profile for each truck with which you
will use your dēzlCam device.
Select Settings > Vehicle Profile > .
1
Select an option:
2
• To add a straight truck with a permanently attached cargo
area, select Straight Truck.
• To add a tractor or a tractor-trailer combination, select
Tractor.
Follow the on-screen instructions to enter the vehicle
3
characteristics.
After you add a vehicle profile, you can edit the profile to enter
additional detailed information, such as the vehicle identification
number or trailer number.
Activating a Vehicle Profile
Before you can activate a vehicle profile, you must add the
profile.
Select Settings > Vehicle Profile.
1
Select a vehicle profile.
2
The vehicle profile information appears, including
measurements and weight.
Select Select.
3
Changing Your Trailer Information
Before you can change your trailer information, you must enter a
vehicle profile for a tractor.
When you change the trailer on your tractor, you can change the
trailer information in your vehicle profile without changing the
tractor information. You can switch quickly between frequently
used trailers.
Select Settings > Vehicle Profile.
1
Select the tractor vehicle profile to use with the trailer.
2
Select .
3
Select an option:
4
• To use a recent trailer configuration, select a trailer
configuration from the list.
• To enter a new trailer configuration, select New
Configuration, and enter the trailer information.
Editing a Vehicle Profile
You can edit a vehicle profile to change truck information or to
add detailed information to a new vehicle profile, such as the
vehicle identification number, trailer number, or odometer
reading. You can also rename or delete a vehicle profile.
Select Settings > Vehicle Profile.
1
Select the vehicle profile to edit.
2
Select an option:
3
• To edit the vehicle profile information, select , and select
a field to edit.
• To rename a vehicle profile, select > Rename Profile.
• To delete the vehicle profile, select > Delete.
Navigating to Your Destination
Routes
A route is a path from your current location to a destination. A
route may include multiple locations, or stops, on the way to the
destination (Adding a Location to Your Route, page 4). The
device calculates the route to your destination based on the
preferences you select in the navigation settings, such as the
route calculation mode (Changing the Route Calculation Mode,
Vehicle Profiles3
page 5) and avoidances (Avoiding Delays, Tolls, and Areas,
page 6). The device can also avoid roads that are not
appropriate for the active vehicle profile.
Starting a Route
Select Where To?.
1
Select Enter Search, enter a search term, and select
2
(Finding a Location Using the Search Bar, page 7).
TIP: You can also search for locations using categories,
search tools, or other methods (Finding Locations,
page 7).
Select a location.
3
Select Go!.
4
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your Route on
the Map, page 4).
If you need to stop at additional locations, you can add the
locations to your route (Adding a Location to Your Route,
page 4). You can also shape the route to adjust its course
(Shaping Your Route, page 4).
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
Select Where To? > Saved > Home.
1
Select .
2
Select > Edit.
3
Enter your changes.
4
Select Done.
5
Your Route on the Map
NOTICE
The speed limit feature is for information only and does not
replace your responsibility to abide by all posted speed limit
signs and to use safe driving judgment at all times. Garmin will
not be responsible for any traffic fines or citations you receive for
failing to follow all applicable traffic laws and signs.
As you travel, the device guides you to your destination using
voice prompts and information on the map.
Active Lane Guidance
As you approach a turn while navigating a route, a detailed
simulation of the road appears beside the map, if available. A
colored line À indicates the proper lane for the turn.
Viewing a List of Turns
While navigating a route, you can view all of the turns and
maneuvers for your entire route and the distance between turns.
While navigating a route, select the text bar on the top of the
1
map.
Select a turn.
2
The details for the turn appear. If available, an image of the
junction appears for junctions on major roadways.
Viewing the Entire Route on the Map
While navigating a route, select anywhere on the map.
1
Select .
2
Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route (Starting a Route, page 4).
You can navigate to additional locations on the way to your
destination. For example, you can add a fuel station as the next
stop in your route. You can also add a location to the end of
your route.
TIP: To create complex routes with multiple locations or
scheduled stops, you can use the trip planner to plan, edit, and
save your route (Planning a Trip, page 5).
From the map, select > Where To?.
1
Search for a location (Finding Locations, page 7).
2
Select a location.
3
Select Go!.
4
Select an option:
5
• To add the location as the next stop in your route, select
Add As Next Stop.
• To add the location to the end of your route, select Add As Last Stop.
• To add the location and adjust the order of locations in
your route, select Add to Active Route.
Your device re-calculates the route to include the added location
and guides you to the locations in order.
Instructions for your next turn or exit, or other action appear
across the top of the map. The symbol À indicates the type of
action and the lane or lanes in which you should be traveling, if
available. The device also displays the distance to the next
action Á and the name of the street or exit associated with that
action Â.
A colored line à highlights the course of your route on the map.
Arrows on the map Ä indicate upcoming turns. When you
approach your destination, a checkered flag indicates the
location of your destination.
Your vehicle speed Å, the road on which you are traveling Æ,
and your estimated arrival time Ç appear at the bottom of the
map. You can customize the arrival time data field to display
other information (Changing the Map Data Field, page 11).
A data field displaying the speed limit may appear as you travel
on major roadways. This feature is not available in all areas.
4Navigating to Your Destination
Shaping Your Route
Before you can shape your route, you must start a route
(Starting a Route, page 4).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a stop or destination to the route.
Touch anywhere on the map.
1
Select .
2
The device enters route shaping mode.
Select a location on the map.
3
TIP: You can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
If necessary, select an option:
4
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
When you are finished shaping the route, select Go!.
5
Taking a Detour
Before you can take a detour, you must be navigating a route
and you must add the change route tool to the map tools menu
(Enabling Map Tools, page 10).
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
From the map, select > Change Route.
1
Select an option:
2
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
Stopping the Route
From the map, select > Stop.
Changing the Route Calculation Mode
Select Settings > Navigation > Calculation Mode.
1
Select an option:
2
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Less Fuel to calculate routes that are more fuelefficient.
NOTE: This feature is available only when you are using
the car vehicle profile.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Starting a Route by Using the Map
You can start route by selecting a location from the map.
Select View Map.
1
Drag and zoom the map to display the area to search.
2
If necessary, select to filter the displayed points of interest
3
by category.
Location markers ( or a blue dot) appear on the map.
Select an option:
4
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
Select Go!.
5
Previewing Multiple Routes
Search for a location (Finding a Location by Category,
1
page 7).
From the search results, select a location.
2
Select Routes.
3
Select a route.
4
Trip Planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customize it, including reordering locations, optimizing
the order of stops, adding scheduling information, and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a Trip
A trip can include many locations, and it must include at least a
starting point and a destination. The starting location is the
location from which you plan to start your trip. If you start
navigating the trip from a different location, the device gives you
the option to route to your starting location first. The destination
is the final location in the trip. For a round trip, the starting
location and destination can be the same. You can also include
additional locations, or stops, between your starting location and
your destination.
Select Apps > Trip Planner > > Create Trip.
1
Select Select Start Location.
2
Select a location for your starting point, and select Select.
3
Select Select Destination.
4
Select a location for your destination, and select Select.
5
If necessary, select Add Location to add additional
6
locations.
After you have added all the necessary locations, select Next
7
> Save.
Enter a name, and select Done.
8
Navigating to a Saved Trip
Select Apps > Trip Planner.
1
Select a saved trip.
2
Select Go!.
3
Select your next destination, and select Start.
4
Optimizing the Order of Stops in a Trip
The device can automatically optimize the order of locations in
your trip to create a shorter, more efficient route. The starting
point and destination are not changed when you optimize the
order.
While editing a trip, select > Optimize Order.
Editing and Reordering Locations in a Trip
Select Apps > Trip Planner.
1
Select a saved trip.
2
Select a location.
3
Select an option:
4
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Editing and Saving Your Active Route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
Select Apps > Trip Planner > My Active Route.
1
Edit your route using any of the trip planner features.
2
The route recalculates each time you make a change.
Select Save to save your route as a trip, which you can
3
navigate again later (optional).
Changing Trip Routing Options
You can change routing options to change how routes for your
trip are calculated.
Select Apps > Trip Planner.
1
Select a saved trip.
2
Navigating to Your Destination5
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.