Garmin 192C User Manual

®

GPSMAP

192C

Start-Up Sequence

To turn on the GPSMAP 192C:

1. Press and hold the POWER key.

2. Press ENTER to acknowledge the warning. The
GPS Info Page displays while the GPSMAP 192C
is acquiring satellite data.

Quick Reference Guide

Simulator

To Turn off the GPSMAP 192C:

Press and hold the POWER

To start the Simulator Mode:

1. Press MENU on the
GPS Info Page.

2. Highlight Start Simulator,
and press ENTER.

Shut Down

key for approximately three
seconds.

Page Sequence

Map Page Numbers Page Active Route Page

Compass Page Highway Page

Page Option Menus

To show page options, press the MENU button once.

Page Display Selection

To change the page display options:

1. Press MENU twice to display the Main Menu page, then
highlight the Pages tab.

2. To select and deselect the pages, highlight the check box and
press ENTER to check or uncheck the box.

3 To go directly to a page, highlight the appropriate Jump To, and

press ENTER.

To use the Find options:

1. Press FIND to display the Find list.

2. Use the ROCKER to highlight a category, and press ENTER.

3. Use the ROCKER to highlight an item, and press ENTER.

Find Function

Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A.
Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.
Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan

Keypad Usage

POWER/BACKLIGHT—turns the unit on and off and controls the
screen backlighting.

PAGE—scrolls the main pages in sequence and returns the screen
from a menu to a main page.

QUIT—returns display to a previous page, restores a data field’s
previous value, and exits out of menus.

MENU—shows available options for the current page. Press twice
to open the Main Menu.

ENTER—activates highlighted fields and confirms menu options
and data entry.

MARK—captures your present location and show the Mark
Position window when pressed and held for two seconds.

Data Entry

To enter data:

1. Highlight a field using the ROCKER.

2. Press ENTER to access the field.

3. Use the ROCKER to select alphanumeric characters.

4. Press ENTER to confirm.

5. You can also change the data in fields such as symbol, name, coordinates, and depth
when marking a waypoint.

Navigation

To use the NAV key:

1. Press NAV to start the navigation selections.

2. Using the ROCKER, select Go To Point, Follow Route, or Follow Track, and press ENTER.

3. Select the point, track, or route from the list, and then press ENTER.

4. If you selected a point, press ENTER again while Go To is highlighted. If you selected
a route or saved track, choose from the start selections, and press ENTER to begin
navigation.

NAV—starts the navigation options, allowing you to navigate using a
waypoint, route, or track.

MOB (Man OverBoard)—marks your present location and instantly
sets a return course to that point.

OUT—increases the zoom range of the Map and Highway Pages.

IN—decreases the zoom range of the Map and Highway Pages.

ROCKER—controls the movement of the cursor or pointer and is

used to select options and locations, and to enter data.

FIND—starts the Find options, allowing you to search for user
points, map items, and any optional data card information.

Part Number 190-00540-01 Rev B.
Printed in Taiwan

Marking Waypoints

To mark a waypoint:

1. To capture your present location, press
and hold ENTER/MARK until the
New Waypoint window appears.

2. Press ENTER/MARK to save the
waypoint.

To graphically mark a waypoint:

1. Move the pointer to the map location.

2. Briefly press ENTER/MARK to open

3. Press ENTER/MARK to save the new

the New Map Waypoint window.

waypoint.

Backlight

To adjust the backlight:

1. Briefly press the POWER key to start the
Backlight adjustment slider.

2. Press up or down on the ROCKER to
adjust the backlight level.

3. Press ENTER to confirm and return to
the previous screen.

MOB

To navigate to a MOB:

1. Press MOB to start the MOB function.

2. To store the MOB waypoint and begin
immediate navigation to that point,
press ENTER.

3. To stop MOB navigation, press NAV,

and choose Stop Navigation.