Gallien-krueger 700RB Manual

700RB Series

Owner’s Manual

700RB

700RB/112

700RB/210

700RB/115

Table of Contents

700RB Series

Table Of Contents
Introduction.....................................................................	3
Quick Start.......................................................................	5
Sound Tips.......................................................................	6
Bi-Amp and Normal Operation....................................	7
Safety Information..........................................................	8
Installation and Maintenance........................................	9
Front Panel Controls.....................................................	10
Rear Panel Controls......................................................	11
700RB Series Combos...................................................	12
Tech Talk.......................................................................	13
Specifications.................................................................	16

*All Features and specifications are subject to change without notice. **This list is subject to change without notice.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead	The exclamation point within an
symbol, within an equilateral triangle, is	equilateral triangle is intended to
intended to alert the user to the	alert the user to the presence of
presence of uninsulated "dangerous voltage"	important operating and
within the product's enclosure that may be of	maintenance (servicing) instructions
sufficient magnitude to constitute a risk of	in the literature accompanying the
electric shock to persons.	appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

Gallien-Krueger

2240 Paragon Dr.

San Jose, CA, 95131

phone: [phone]

fax: [phone]

www.gallien-krueger.com

2

700RB Series

Congratulations

Your purchase of a new Gallien-Krueger 700RB Series product is surely the result of much careful consideration on your part. For our part, we at Gallien-Krueger are pleased that you chose us, and are determined that you will be a satisfied customer. In choosing a 700RB Series product, you own an amplifier with many unique features, that can take you where you have never been before.

To get the most out of your new purchase please take a few minutes to read through this manual. If you are in a hurry, we suggest you at least read through the Quick Start section before setting up your new rig. This will help get you started and give you a few quick tips, but is not a substitute for reading the rest of the manual.

Your amplifier should have come with the following items, please check the contents of the box to ensure that you have everything.

Included with your 700RB Head:
700RB														1
Rack mount Ears with Hardware														2
RBH Amplifier Clip														2
Power Cord														1
4 Conductor Speakon Cable														1
Owner’s Manual														1
Warranty Card														1
Safety Instructions Sheet														1
Included with your 700RB Combo:
700RB/112 (/115, or /210)														1
Power Cord														1
Owner’s Manual														1
Warranty Card														1
Safety Instructions Sheet														1

If your 700RB Series amplifier or combo did not come with all the items listed above, or if you encounter problems while setting up your new equipment, please contact your local dealer, or us as soon as possible at:

Gallien-Kruger, Inc.

2240 Paragon Drive

San Jose, CA 95131 phone: [phone] fax: [phone]

Internet: www.gallien-krueger.com Email: [e-mail]

We wish you a lifetime of good playing and remember to always have fun!

Introduction

3

Introduction

700RB Series

Always Listening

I have never seen the point in doing things the way others have done them. I also have not been very interested in following the latest fad. I am a Stanford educated engineer who worked his way through school as a musician. Like all musicians, I have lugged amplifiers up stairways and into car trunks, always wondering why these things had to be so heavy, bulky, and hard to handle.

As I am the principal innovator at G K, our products reflect my attitudes and life experiences. I don’t model my designs after other manufacturer’s products (as some of our competitors are proud of reciting). Instead, I believe new and old problems are best solved with new solutions. Having taken our own path, G K products enjoy a unique, unmatched sound, allowing the artist using them every opportunity to make an original statement.

Having supported my products for over thirty years, I have learned from the story they tell. Gallien-Krueger is a reflection of that story, and has a commitment to support that legacy. Just as the products I created thirty years ago are still telling their story, the products we create today will be talking to us tomorrow.

We’ll be listening,

Robert Gallien

4

700RB Series

Quick Start

The 700RB Series is designed to be simple to operate. All controls have a well defined purpose and are well behaved. These directions will take you through the basics and give you a good start for setting up your sound.

First:

Set the power switch to Off and connect the supplied power cable, from the amplifier AC receptacle, to an AC power outlet of proper voltage and power rating (see safety information on page 7 for details).

Next:

Connect your speaker cabinets to the amplifier outputs marked 380W AMP ONLY or “SPEAKON” OUTPUTS. Be sure not to exceed the recommended speaker load below.

Maximum Recommended Speaker Load:

One 4 Ohm, or two 8 Ohm cabinets on the 380W Amp. One or two 8 Ohm horns on the 50W Amp.

If you are using an RBH Series cabinet, use the supplied 4 conductor Speakon cable to connect to the “Speakon” outputs on the rear panel of the amplifier. Set the Woofer X-Over and Tweeter Hi Cut switches on the front panel to the IN position. In addition, set the switch on the RBH cabinet to Bi-Amp.

For connection to all other cabinets, connect to the 1/4” outputs labeled 380W amp only. Set the Woofer X- Over switch on the front panel to the Out position.

For more information on Bi-Amp and Normal Operation, see page 7.

Caution:

Do not connect the Speakon cable labeled “Bridge Mode” to the 700RB. This may result in damage to the amplifier.

Then:

Set all EQ controls and the Boost control to 12 o’clock. The Voicing Filters should be turned all the way down to get a flat response. Set the Volume and Master Volumes at 0. If you have a five string bass, push the button marked String Bass in.

Next:

Using an instrument cable, connect your bass to the Input jack and turn the power switch on and play. If the input clipping LED flashes, push the button marked - 10db in. This will prevent you from overdriving the preamp.

Now:

Set the volume control to 12 o’clock and slowly bring the Master volume up. Do not turn the Volume control in the input section past 12 o’clock unless you want an overdrive effect. If you have a bass with passive electronics make sure the controls are all the way up. If you have a bass with active electronics, turn all of the EQ controls on the bass to the middle or flat position.

At This Point:

You should be hearing your bass quite well. You can use the Volume and Woofer-Master to achieve a comfortable sound level. Remember: If you need more volume, turn up the Woofer-Master control first.

Start Quick

5