Galaxy G8, G12, G12-AT, G14, G8-AT Installation And Operation Instructions Manual

®

®

®

®

®

POPCORN

POPPERS

MODELS

G8, G8-AT
G12, G12-AT
G14, G14-AT
G18, G18-AT

Installation and

Operation

Instructions

2M-Y8351 Rev. O 12/12/2011

G14-AT

1

2

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specications and product design without

notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the specications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

reached as a result of using the specications. By using the information
provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when

you call to ensure a faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone]
Fax: [phone]

E-mail [e-mail]

[e-mail]

[e-mail]

Website: www.star-mfg.com

Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit

or
for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]

Mailing Address: Star International Holdings Inc., Company

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

PRODUCT IDENTIFICATION

Star Manufacturing International Popcorn Machines
Galaxy Models: G8, G8-AT, G12, G12-AT, G14, G14-AT, G18 and G18-AT

SPECIFICATIONS

MODEL G8 8 oz. Electric Model

Capacity: 8 oz. (230g) All Steel Kettle, 170 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 1736 watts, 14.4 amps
230 volt, 50 hertz, single phase, 1595 watts, 6.93 amps
Dimensions: 21-1/8"D x 21-1/8"W x 35-1/2" H (53.66cm D x 53.66cm W x 90.17cm H)

Net Weight: 87 lbs. (39.5 Kilograms)

MODEL G8-AT 8 oz. Antique Electric Counter Model

Capacity: 8 oz. (230g) All Steel Kettle, 170 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 1736 watts, 14.4 amps
230 volt, 50 hertz, single phase, 1595 watts, 6.93 amps
Dimensions: 23-3/16"D x 23-3/16"W x 40-5/8"H (58.90cm D x 58.90cm W x 103.19cm H)

Net Weight: 94 lbs. (42.7 Kilograms)

MODEL G12 12 oz. Electric Model

Capacity: 12 oz.(340g) All Steel Kettle, 240 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 2136 watts, 17.8 amps
240 volt, 50/60 hertz, single phase, 2136 watts, 8.9 amps
230 volt, 50 hertz, single phase, 1962 watts, 8.53 amps
Dimensions: 21-1/8"D x 21-1/8"W x 35-1/2"H (53.66cm D x 53.66cm W x 90.17cm H)

Net Weight: 87 lbs. (39.5 Kilograms)

MODEL G12-AT 12 oz. Antique Electric Counter Model

Capacity: 12 oz.(340g) All Steel Kettle, 240 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 2136 watts, 17.8 amps
240 volt, 50/60 hertz, single phase, 2136 watts, 8.9 amps
230 volt, 50 hertz, single phase, 1962 watts, 8.53 amps
Dimensions: 23-3/16"D x 23-3/16"W x 40-5/8"H (58.90cm D x 58.90cm W x 103.19cm H)

Net Weight: 94 lbs. (42.7 Kilograms)

MODEL G14 14 oz. Electric Model

Capacity: 14 oz. (400g) All Steel Kettle, 280 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 2416 watts, 20.13 amps
240 volt, 50/60 hertz, single phase, 2416 watts, 10.0 amps
230 volt, 50 hertz, single phase, 2219 watts, 9.65 amps
Dimensions: 24-1/8"D x 28-1/8"W x 35-1/2"H (61.28cm D x 71.44cm W x 90.17cm H)

Net Weight: 107 lbs. (48.6 Kilograms)

MODEL G14-AT 14 oz. Antique Electric Counter Model

Capacity: 14 oz. (400g) All Steel Kettle, 280 one ounce (28g) servings per hour
Electrical: 120 volt, 60 hertz, single phase, 2416 watts, 20.13 amps
240 volt, 50/60 hertz, single phase, 2416 watts, 10.0 amps
230 volt, 50 hertz, single phase, 2219 watts, 9.65 amps
Dimensions: 26-3/16"D x 30-3/16"W x 40-5/8"H (66.52cm D x 76.68cm W x 103.19cm H)

Net Weight: 114 lbs. (51.8 Kilograms)

3

SPECIFICATIONS CONT
MODEL G18 18 oz. Electric Model

Capacity: 18 oz. (510g) All Steel Kettle, 360 one ounce (28g) servings per hour
Electrical: 240 volt, 50/60 hertz, single phase, 2816 watts, 11.73 amps
230 volt, 50 hertz, single phase, 2587 watts, 11.25 amps
Dimensions: 24-1/8"D x 28-1/8"W x 35-1/2"H (61.28cm D x 71.44cm W x 90.17cm H)

Net Weight: 107 lbs. (48.6 Kilograms)

MODEL G18-AT 18 oz. Antique Electric Counter Model

Capacity: 18 oz.(510g) All Steel Kettle, 360 one ounce (28g) servings per hour
Electrical: 240 volt, 50/60 hertz, single phase, 2816 watts, 11.73 amps
230 volt, 50 hertz, single phase, 2587 watts, 11.25 amps
Dimensions: 26-3/16"D x 30-3/16"W x 40-5/8"H (66.52cm D x 76.68cm W x 103.19cm H)
Net Weight: 114 lbs. (51.8 Kilograms)

OPERATING CONTROLS

The operating controls are located above the serving doors.

Kettle heat switch - turns on heat in the kettle and the corn agitator motor.
Corn freshener heat lamp - turns on the heat lamp and heating element under the corn pan.

4

GENERAL INSTALLATION DATA

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the
general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the
units operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If
equipment is received in damaged condition, either apparent or concealed, a claim must be made
with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection. The carrier will make an inspection and will supply necessary claim forms.

INSTALLATION

Each machine has been properly wired and inspected at the factory for operation on the voltage and

type of current specied on the nameplate.

CAUTION

DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE WILL
BE SERIOUSLY DAMAGED.

A receptacle is furnished with the G12 120 volt and G14 120 volt popcorn machines.
We strongly recommend installation by a licensed electrician. The guarantee of this machine as
covered by the warranty does not apply if an improper installation has been made.

120 VOLT MACHINES

Machines with a nameplate stamped 120V, are equipped for operation on 120 volt 60 hertz AC single
phase service and must be connected to a separate 20 amp circuit with a 3 wire grounded, polarized
receptacle. NOTE: The G14 120V machine uses a 30 amp circuit.

240/230 VOLT MACHINES

Machines with a nameplate stamped 240V, are equipped for operation on 240 volt 50/60 hertz AC
single phase service. Machines with a nameplate stamped 230V, are equipped for operation on 230
volt 50 hertz AC single phase service. All must be connected to a separate 15 amp circuit with a 3
wire grounded, polarized receptacle.

5

GENERAL OPERATING INSTRUCTIONS

IL1031A

CAUTION

The motor air exhaust holes located on top of the machine must be clear of any obstructions.

DO NOT COVER THESE AIR VENT HOLES AS SERIOUS DAMAGE WILL RESULT.
Make sure the corn drawer is in place on the machine before starting the popping

cycle.

1. Turn on both switches.

2. For the rst batch allow kettle to preheat for 5-7 minutes. No preheat is required after rst batch

is popped.

3. Add popping oil to kettle. Immediately add popcorn and seasoning salt and close kettle lid. For
best results, ratio is 1 part of oil to 4 parts of corn. Use measuring cups provided or proportioned
corn/oil packages. Contact your local Dealer for pre-portioned packages.

4. Immediately empty kettle when popping stops.

5. Repeat step 3 immediately or turn kettle off.

IMPORTANT

Turn kettle heat switch off when not popping!
Never pop corn without oil!

SWITCHES

The corn freshener and heat lamp switch controls the
bottom heating element and the top heat lamp. The
kettle heat switch controls the kettle heating element
& the corn agitator. This motor should be kept running
when there is corn in the kettle to prevent scorching or
burning.

All of the above switches are in the ON

position when they are lighted.

KETTLE

The kettle heating element is thermostatically controlled.
Thermostat adjustment should not be necessary since it has
been preset at the factory for the correct popping temperature.

Dump the kettle by turning the kettle handle counterclockwise
90° to release its latch and hold the handle in this position
while tipping the kettle and handle down (see Figure 1).

CAUTION

Do not leave the kettle heat & corn agitator switch "ON" (1) when the machine is not in use.
Do not immerse the kettle in water or allow water to come in contact with the heating

element.
Popping corn without oil in the kettle (a dry kettle) is not recommended.
Do not connect the machine to direct current (DC) since it is designed to operate on alternating

current (AC) only.

6

KETTLE MAINTENANCE - CLEANING

After each popping period, wipe the inside and outside of
the kettle while it is warm (not hot) with a clean cloth. This
is important to keep salt and seasoning from forming a

carbonized material which not only lowers popping efciency

but can cause excessive smoking or damage the kettle.
Clean the inside and outside kettle shell including the covers

and all attached parts with warm water and mild soap or
detergent solution (see Figure 2).

CAUTION
DO NOT IMMERSE THE KETTLE IN WATER OR ALLOW WATER TO ENTER
THE KETTLE SHELL SINCE THIS WILL DAMAGE ELECTRICAL PARTS
INSIDE THE ASSEMBLY.

To remove the kettle:

Turn off all switches and allow the kettle to cool. Use heat insulating gloves to remove a hot kettle.
Disconnect the twist lock plug at the end of the kettle conduit from its receptacle. Turn the kettle
handle counterclockwise 90° to release its latch. Hold the handle in this position while tipping the
kettle and handle down and pushing up on the bottom of the kettle to remove it from the hooks (see
Figure 1).

To replace heat lamp:

Turn off all switches and allow kettle to cool to touch.
Remove the (1) screw holding the lamp shield and pull down
on lamp shield to remove it from the top liner. Replace the
heat lamp with the same type and wattage lamp. Do not
install a lamp higher in wattage than indicated on the label
located near the lamp socket (see Figure 3).

MAINTENANCE AND REPAIRS

Contact the factory, a service representative, or a local service
company for service or required maintenance.

7

2M-4497-2 6/1312

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers

(Model 16PD-A Only)

* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens

(Model PO12 Only)

* Heat Lamps
* Pumps-Manual

Visit our Website at: www.star-mfg.com Email: [e-mail]

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which
the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation
company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.

LIMITED EQUIPMENT WARRANTY

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.

>

Star will not assume any responsibility for loss of revenue.

>

On all shipments outside the United States and Canada, see International Warranty.

*

The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor.

*

The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor.

*

The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.

*

The warranty period for the Chrome-Max Griddles is ve (5) years on the griddle surface. See detailed warranty provided with unit.

*

The warranty period for Teon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Teon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identiers and

point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.

>

This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.

>

This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.

>

This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.

>

This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

PARTS WARRANTY

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted.

SERVICES NOT COVERED BY WARRANTY

PORTABLE EQUIPMENT

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

10. Voltage conversions

11. Gas conversions

12. Pilot light adjustment

13. Miscellaneous adjustments

14. Thermostat calibration and by-pass adjustment

15. Resetting of circuit breakers or safety controls or reset buttons

16. Replacement of bulbs

17. Replacement of fuses

18. Repair of damage created during transit, delivery, &
installation OR created by acts of God

* The Model 510FD, 510FF Fryer.
* The Model 526TOA Toaster Oven.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
* All Fast Steamer Models except Direct Connect Series.

8

MODEL:

G8 AND G12

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK1142 Rev F

2/08/2007

1

3

4

5

7

8

9

2

LOWER

HEATER

HEAT

LAMP

AGITATOR

MOTOR

FLEXIBLE

CONDUIT

RECEPTACLE

PLUG

CORD SET

FRAME GROUND

WHITE

TERMINAL

BLOCK

BLACK

10

(BROWN)

(BLUE)

12

WHITE

BLACK

BLACK

WHITE

BLACK

THERMOSTAT

THERMOSTAT

NOTE:

USE THIS DIAGRAM FOR WIRING OF MODEL G12 KETTLE ONLY

KETTLE WIRING OF

MODEL G8

ALL OTHER WIRING IS THE SAME AS SHOWN FOR MODELS G8

13

SWITCH

BLACK

BLACK

7

WHITE

WHITE

BLACK

WHITE

BLACK

BLACK

WHITE

KETTLE

SWITCH

LAMP

NOTE:

SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON THE MACHINE

SWITCH LIGHT TO FUNTION PROPERLY

WIRES #1 AND #2 MUST BE CONNECTED TO SWITCH TERMINALS AS SHOWN FOR

KETTLE

HEATER

HEATER

KETTLE

RECEPTACLE

PLUG

FLEXIBLE

CONDUIT

3

BLACK

WHITE

4

11

HIGH LIMIT THERMOSTAT

17

KETTLE

HEATER

HIGH LIMIT

11

12

THERMOSTAT

17

6

18

19

18

THERMOSTAT

9

MODEL:

G14 AND G18

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK1152 Rev E

1/26/2007

4

3

KETTLE

HEAT

LAMP

AGITATOR

MOTOR

THERMOSTAT

FLEXIBLE

CONDUIT

RECEPTACLE

PLUG

BLACK

10

6

9

11

10

BLACK

WHITE

15

BLACK

WHITE

BLACK

HEATER

KETTLE

HEATER

THERMOSTAT

WHITE

NOTE:

SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON MACHINE

FOR SWITCH LIGHT TO FUNCTION PROPERLY

CONTACTOR

17

BLACK

12

BLACK

BLACK

BLOCK

TERMINAL

WHITE

FRAME GROUND

CORD SET

HEATER

LOWER

1

BLACK

BLACK

BLACK

WHITE

BLACK

BLACK

BLACK

13

14

WHITE2WHITE

BLACK

WHITE

BLACK

(BLUE)

(BROWN)

WHITE

WHITE

5

WIRES #13 AND #14 MUST BE CONNECTED TO TERMINALS AS SHOWN

KETTLE

SWITCH

LAMP

SWITCH

16

HIGH LIMIT

23

THERMOSTAT

8

7

2 PLC

23

24

22

19

10

MODEL:

G8 AND G12, 230CE

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK1316 Rev B

11/04/2005

1

3

4

6

7

8

9

2

LOWER

HEATER

KETTLE

HEATER

HEAT

LAMP

AGITATOR

MOTOR

KETTLE

H/L THERMOSTAT

FLEXIBLE

CONDUIT

RECEPTACLE

PLUG

FRAME GROUND

WHITE

TERMINAL

BLOCK

BLACK

10

19

11

12

11

WHITE

BLACK

BLACK

WHITE

BLACK

THERMOSTAT

THERMOSTAT

NOTE:

USE THIS DIAGRAM FOR WIRING

KETTLE WIRING OF

G8 240VE MODEL

OF MODEL G12 240VE KETTLE ONLY

ALL OTHER WIRING IS THE SAME AS SHOWN FOR MODEL

G8

13

SWITCH

BLACK

BLACK

7

WHITE

WHITE

BLACK

WHITE

BLACK

BLACK

WHITE

KETTLE

SWITCH

LAMP

NOTE:

SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON THE MACHINE

SWITCH LIGHT TO FUNTION PROPERLY

WIRES #1 AND #2 MUST BE CONNECTED TO SWITCH TERMINALS AS SHOWN FOR

KETTLE

HEATER

HEATER

KETTLE

RECEPTACLE

PLUG

FLEXIBLE

CONDUIT

3

BLACK

WHITE

4

G

N

L

INLET

GREEN

14

15

16

17

18

HIGH LIMIT THERMOSTAT

THERMOSTAT

17

18

17

17

17

A

A

A

5

11

KETTLE

HEAT

LAMP

AGITATOR

MOTOR

THERMOSTAT

FLEXIBLE

CONDUIT

RECEPTACLE

PLUG

7

9

11

10

15

16

BLACK

HEATER

KETTLE

HEATER

THERMOSTAT

NOTE:

SWITCHES ARE VIEWED FROM TERMINAL SIDE AS MOUNTED ON MACHINE

FOR SWITCH LIGHT TO FUNCTION PROPERLY

8

BLACK

12

BLACK

BLOCK

TERMINAL

WHITE

HEATER

LOWER

BLACK

BLACK

BLACK

WHITE

BLACK

WHITE

WIRES #13 AND #14 MUST BE CONNECTED TO TERMINALS AS SHOWN

KETTLE

SWITCH

LAMP

SWITCH

G

N

L

INLET

GREEN

10

4

3

2

1

17

19

18

20

HIGH LIMIT THERMOSTAT

22

21

23

23

WHITE

WHITE

BLACK

BLACK

MODEL:

G14 AND G18, 230CE

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

STAR MANUFACTURING INTERNATIONAL INC.

SK1318 Rev A

11/04/2005

12

20

2

42

43

44

32

27

28

29

3

5

4

7

6

10

11

9

24

25

24

23

26

1

8

17

21

19

15

18

30

41

59

38

33

35

31

40

39

37

36

16

12

13

14

46

45

49

47

48

51

52

2C-T1008

Grooved Pin

53

54

56

55

22

37

34

58

57

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - G8-Y/G12-Y, 8 / 12 oz. 120/240V/230CE

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

SK1180 REV. E 11/22/10

13

PARTS LIST February 17, 2011, Rev. O

MODEL

G8-Y, G12-Y 120V/240V/230CE

Number

Key

Number

- 2M-Y8602 1 LABEL STRIPE YELLOW/BLUE (Not Shown) G12

- 2M-Y8420 1 LABEL STRIPE BLACK (Not Shown) G12
1 2M-Z9183 1 LABEL FRONT
2 2E-Z9310 2 SWITCH (LIGHTED) after serial number G8010126 G8
2E-Z9310 3 SWITCH (LIGHTED) before serial number G8010126 G8
2E-Z9310 2 SWITCH (LIGHTED) after serial number G1206539 G12
2E-Z9310 3 SWITCH (LIGHTED) before serial number G1206539 G12
3 C3-Y7952 1 BRACKET CATCH
4 2R-Y7844 2 CATCH MAGNETIC
5 C3-Y7953 1 COVER BRACKET
6 C3-Y7377 2 BRACKET HINGE LEFT
7 C3-Y7446 2 BRACKET HINGE RIGHT
8 C3-Y8187 1 LOWER DOOR
9 C3-Y7475 2 DOOR PULL ASSEMBLY (INC.IN DOOR ASSYS.)
10 C3-G8074 1 LEFT DOOR ASSEMBLY
11 C3-G8073 1 RIGHT DOOR ASSEMBLY
12 2L-Y8863 1 OIL MEASURE CUP 2 CUP (PLASTIC)
13 2L-Y8812 1 CORN MEASURE CUP 2 CUP (PLASTIC)
14 2L-Y4916 1 SCOOP - POPCORN (PLASTIC)
15 C3-G8021 1 CORD ASSEMBLY 120V G8
C3-G8022 1/1 CORD ASSEMBLY 240V G8 / G12
C3-G1410 1 CORD ASSEMBLY 120V G12
2E-Z0151 1/1 CORD ASSEMBLY 230CE G8 / G12
16 2K-Y2968 1 BUSHING-STRAIN RELIEF 120V G8
2K-Y6764 1 BUSHING 120V/240V G12
17 C3-Y7940 1 DRAWER CORN
18 2A-6904 4 FOOT
2P-Y3404 4 PLUG - FOOT
2C-1557 4 SCREW - FOOT
19 2E-Y2849 1 BLOCK TERMINAL
20 2P-6475 4 CLIP-TY
21 2N-Y8502 1 ELEMENT-80 WATT 120V
2N-Y8503 1 ELEMENT-90 WATT 240V/230CE
22 2K-Y1139 1 BUSHING HEYCO
23 2Q-Y7830 2 GLASS SIDE (TEMPERED)
24 2I-Y7836 6 CHANNEL GLASS (TOP/BOTTOM)
25 2I-Y7840 6 CHANNEL GLASS (UPRIGHT)
26 2Q-Y8606 1 GLASS FRONT
27 2E-Y8212 1 SOCKET LAMP
2E-Y9433 1 SOCKET LAMP 230CE
28 2S-8337 1 LAMP-150W 120V G8
2S-Y2238 1 LAMP - 250W 120V-120V G12
2S-Y8712 1/1 LAMP 150W 230CE/240V G8 / G12
2S-Y8346 1 LAMP 250W 240V G12
29 2B-Y7829 1 LAMP SHIELD
30 2C-1823 10 WASHER LOCK
31 2C-9398 4 SCREW
32 2E-T1042 1 RECEPTACLE 120V
2E-Z0089 1 OUTLET STRAIGHT BLADE 230CE/240V
33 2A-Y8645 1 PIN STOPPER-SHORT
34 2C-Y8646 1 SCREW
35 2A-Y8032 1 PIN STOPPER
36 2C-Y8147 1 SCREW

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Part

Number

Per

Unit

Description and Model Designation

Star International Holdings, Inc. Company

14

PARTS LIST February 17, 2011, Rev. O

MODEL

G8-Y, G12-Y 120V/240V/230CE

Number

Key

Number

37 2C-1811 2 BURR
38 2F-Y8757 1 HANGER REAR
39 2C-2581 2 NUT
40 2A-Y8033 1 ROD SPACER
41 2F-Y8757 1 HANGER FRONT
42 2R-Y4810 1 FAN
43 PS-G8101 1 2U-Y8213, MOTOR REPL KIT, 120V
PS-G8102 1 2U-Y8214, MOTOR REPL KIT, 240V/230CE
44 2I-Y6709 1 CUSHION-MOTOR
45 C3-G8090 1 LID ASSEMBLY LEFT
46 2R-Y8379 1 TAB-COVER
47 2B-Y8050 1 BLADE AGITATOR
48 2A-Y8026 1 COLLAR-AGITATOR
49 C3-G8091 1 LID ASSEMBLY RIGHT
51 2F-Z6501 1 CROSS BAR ASSEMBLY
52 2A-Y7928 2 KNOB
53 C3-G8033 1 SHAFT ASSEMBLY
54 2D-Y8044 1 SPINNER TOP
55 2C-Y8146 1 SCREW
56 2A-G8032 1 SHAFT-MOTOR ASSEMBLY
57 2E-Y9253 1 INLET 230CE
58 2R-Y6763 1 KNOB 230CE
59 C3-G8044 1 TOP ASSEM G8-AT G8Y-230CE, G12-Y-230CE
G8-AT, G12-AT
C3-G8048 1 TOP ASSEM G8 G8-Y, G12-Y

-- 2E-8715 1 FEMALE RECEPTACLE (WALL) G12-120V ONLY

-- 2M-Y3147 1 CAUTION - HOT LABEL

-- 2M-Z0008 1 INSTRUCTION LABEL (CLEAR)

-- 2C-T1008 1 GROOVED PIN 1/8 x 1/2

Part

Number

Per

Unit

Description

2

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

15

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - G8AT/G12AT
8 / 12 oz. 120/240V/230CE

SK1185 REV. E 11/22/10

20

2

41

42

43

31

26

27

28

3

5

4

7

6

10

11

9

24

24

25

24

23

23

1

8

17

21

19

15

18

29

40

37

34

30

39

38

36

35

16

12

13

14

45

44

48

46

47

50

51

52

53

55

54

22

57

56

32

33

36

58

58

SOME ITEMS ARE INCLUDED FOR
CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

16

PARTS LIST November 22, 2010, Rev. O

G8-AT, G12-AT 120V/240V/230CE

MODEL

Number

Key

Number

1 2M-Z9184 1 LABEL FRONT
2 2E-Z9310 2 SWITCH (LIGHTED) after serial number G8010126 G8
2E-Z9310 3 SWITCH (LIGHTED) before serial number G8010126 G8
2E-Z9310 2 SWITCH (LIGHTED) after serial number G1206539 G12
2E-Z9310 3 SWITCH (LIGHTED) before serial number G1206539 G12
3 C3-Y7952 1 BRACKET CATCH
4 2R-Y7844 2 CATCH MAGNETIC
5 C3-Y7953 1 COVER BRACKET
6 C3-Y7377 2 BRACKET HINGE LEFT
7 C3-Y7446 2 BRACKET HINGE RIGHT
8 C3-Y8187 1 LOWER DOOR
9 C3-Y7475 2 DOOR PULL ASSY. (INC. IN DOOR ASSYS.)
10 C3-G8076 1 LEFT DOOR ASSY.
11 C3-G8075 1 RIGHT DOOR ASSY.
12 2L-Y8863 1 OIL MEASURE CUP 2 CUP (PLASTIC)
13 2L-Y8812 1 CORN MEASURE CUP 2 CUP (PLASTIC)
14 2L-Y4916 1 SCOOP - POPCORN (PLASTIC)
15 C3-G8021 1 CORD ASSY. 120V G8-AT, G8-Y
D5-HFD028 1 CORDSET ASSY. 5-20P,6' G8-AT-120VC, G8-Y-120VC
C3-G1410 1 CORD ASSY. 120V G12-AT
C3-G8022 1/1 CORD ASSY. 240V G8-AT / G12-AT
2E-Z0151 1/1 CORD ASSY 230CE G8-AT / G12-AT
16 2K-Y2968 1 BUSHING - STRAIN RELIEF 120V/240V
2K-Y6764 1 BUSHING 120V/240V G12-AT
17 C3-Y7940 1 DRAWER CORN
18 2A-6904 4 FOOT
2P-Y3404 4 PLUG - FOOT
2C-1557 4 SCREW - FOOT
19 2E-Y2849 1 BLOCK TERMINAL
20 2P-6475 4 CLIP-TY
21 2N-Y8502 1 ELEMENT - 80 WATT 120V
2N-Y8503 1 ELEMENT - 90 WATT 240V
22 2K-Y1139 1 BUSHING HEYCO
23 2Q-Y8508 3 GLASS TEMPERED
24 2I-Y7836 6 CHANNEL GLASS
25 2I-Y7840 6 CHANNEL GLASS
26 2E-Y8212 1 SOCKET LAMP
2E-Y9433 1 SOCKET LAMP 240V
27 2S-8337 1 LAMP - 150 WATT 120V G8-AT
2S-Y2238 1 LAMP - 250 WATT 120V G12-AT
2S-Y8712 1/1 LAMP - 150 WATT 230CE/240V G8-AT / G12-AT
2S-Y8346 1 LAMP 250W 240V G12-AT
28 2B-Y7829 1 LAMP SHIELD
29 2C-1823 10 WASHER LOCK
30 2C-9398 4 SCREW
31 2E-T1042 1 RECEPTACLE 120V
2E-Z0089 1 RECEPTACLE, STRAIGHT BLADE 230CE/240V
32 2A-Y8645 1 PIN STOPPER - SHORT
33 2C-Y8646 1 SCREW
34 2A-Y8032 1 PIN STOPPER
35 2C-Y8147 1 SCREW

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Part

Number

Per

Unit

Description and Model Designation

Star International Holdings, Inc. Company

17

PARTS LIST November 22, 2010, Rev. O

G8-AT, G12-AT 120V/240V/230CE

MODEL

Number

Key

Number

36 2C-1811 2 BURR
37 2F-Y8757 1 HANGER REAR
38 2C-2581 2 NUT ACORN
39 2A-Y8033 1 ROD-SPACER
40 2F-Y8757 1 HANGER FRONT
41 2R-Y4810 1 FAN
42 PS-G8101 1 2U-Y8213, MOTOR REPL KIT, 120V
PS-G8102 1 2U-Y8214, MOTOR REPL KIT, 240V/230CE
43 2I-Y6709 1 CUSHION-MOTOR
44 C3-G8090 1 LID ASSY LEFT
45 2R-Y8379 1 TAB COVER
46 2B-Y8050 1 BLADE-AGITATOR
47 2A-Y8026 1 COLLAR-AGITATOR
48 C3-G8091 1 LID ASSEMBLY RIGHT
49-50 2F-Z6501 1 CROSS BAR ASSEMBLY
51 2A-Y7928 2 KNOB
52 C3-G8033 1 SHAFT ASSEMBLY
53 2D-Y8044 1 SPINNER TOP
54 2C-Y8146 1 SCREW FL. HD.
55 C3-G8032 1 SHAFT-MOTOR ASSEMBLY
56 2L-Y8761 1 ANTIQUE TOP
57 C3-Y8488 4 TRIM TOP
58 2E-Y9253 1 INLET 230CE
59 2R-Y6763 1 KNOB 230CE

-- 2E-8715 1 FEMALE RECEPTACLE (WALL) G12-120V ONLY

-- 2M-Y3147 1 CAUTION - HOT LABEL

-- 2M-Z0008 1 INSTRUCTION LABEL (CLEAR)

Part

Number

Per

Unit

Description

2

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

18

12

11

5

2

3

10

9

14

15

16

21

30

1

28

29

22

4

26

25

22

21

23

31

27

8

20

19

18

6

17

13

32

33

34

35

24

STAR MANUFACTURING INTERNATIONAL, INC.

8 OZ. 120/230CE

Rev. C 3/27/07SK1182

MODEL G8

7

25

8

6

7

Sold as a kit

19

PARTS LIST November 22, 2010, Rev. O

G8 EIGHT OUNCE KETTLE 120V/240V/230CE

MODEL

Number

Key

Number

- C3-G8098 1 KETTLE ASSEMBLY COMPLETE 120V

- C3-G8095 1 KETTLE ASSEMBLY COMPLETE 230CE/240V
1 2P-8354 1 CAP-TWIST LOCK 120V
2P-Z0017 1 PLUG , STRAIGHT BLADE 230CE/240V
2 2K-3831 2 BUSHING
3 2E-Y8063 1 CONDUIT
4 2E-1177 1 CONNECTOR
5 2E-Y4967 1 WASHER
6 2E-Z10325 1 WIRE #11, WIRE KIT ASSEMBLY 120V
2E-Z10459 2 WIRE #11, WIRE KIT ASSEMBLY 230CE/240V
7 2E-Z10325 1 WIRE #12, WIRE KIT ASSEMBLY 120V
8 2E-Z10325 1 WIRE # 18 (GND), WIRE KIT ASSEMBLY 120V
C3-G8045 1 WIRE #18, (GND), WIRE KIT ASSEMBLY 230CE/240V
9 C3-G8030 1 SHELL ASSEMBLY, 8 OZ.
10 2C-2559 3 NUT-ACORN
11 2R-Y8892 1 HANDLE
12 2P-Y8092 1 RETAINING RING
13 2C-Y9767 2 WASHER
14 2P-Y8061 1 SPRING
15 2A-Y8891 1 ROD-CATCH
16 2A-Y8022 1 SET SCREW
17 2A-Y8051 2 STOPPER
18 2C-H8670 4 WASHER-LOCK
19 2C-1493 4 SCREW
20 C3-Y7886-1 1 CHANNEL-RUBBER
21 2C-2560 7 NUT
22 2C-1827 11 EXT. WASHER
23 C3-Y8043 3 CLAMP
24 C3-Y8042 1 THERMOSTAT CLAMP
25 C3-Z5624 1 LUG GB 120V
2E-Z10326 1 WIRE #17, WIRE KIT ASSEMBLY 120V
2E-Z10459 2 WIRE #17, WIRE KIT ASSEMBLY 230CE/240V
26 2T-6213 1 THERMOSTAT 120V (#G8008925 & BELOW)
2T-Y7422 1 THERMOSTAT 120V (#G8008926 & ABOVE)
2T-Y9453 1 THERMOSTAT 230CE/240V (#G8008961 & ABOVE)
27 2N-Y5592 1 ELEMENT HEATING 1420 WATT 120V
2N-Y5593 1 ELEMENT HEATING 1420 WATT 230CE/240V
28 2A-Y8027 1 SPACER-LONG
29 2A-Y8028 2 SPACER
30 2F-Z0019 1 PLATE-KETTLE
31 C3-G8029-PS 1 KETTLE LINER ASSEMBLY, STUDS
32 PS-G1499 1 HIGH LIMIT THERMOSTAT REPLACMENT KIT 120V
2T-Z10182 1 HIGH LIMIT THERMOSTAT, manufactured after Aug. 2007 120V/230CE/240V
33 2C-Z0006 1 SCREW
34 2C-2556 1 NUT
35 2C-1825 1 LOCKWASHER
NI C3-Z5637 3/4 SLEEVING 4.5", WIRE 120V/240V

Part

Number

Per

Unit

Description

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

20

12

11

5

3

10

9

14

15

16

32

1

30

31

4

23

33

28

8

20

19

18

24

25

26

27

29

2

7

6

13

17

21

22

34

36

35

37

38

39

40

22

12 OZ. 120/240V/230CE

SK1183

MODEL G12

Rev. D 3/27/07

STAR MANUFACTURING INTERNATIONAL, INC.

8

25

7

6

35

Sold as a kit

21

PARTS LIST November 22, 2010, Rev. O

G12 TWELVE OUNCE KETTLE 120V/240V/230CE

MODEL

Number

Key

Number

- C3-G1201 1 KETTLE ASSEMBLY COMPLETE 120V

- C3-G8096 1 KETTLE ASSEMBLY COMPLETE 230CE/240V
1 2P-8354 1 CAP-TWIST LOCK 120V
2P-Z0017 1 PLUG, STRAIGHT BLADE 230CE/240V
2 2K-3831 2 BUSHING
3 C3-Y8063 1 CONDUIT
4 2E-1177 1 CONNECTOR
5 2E-Y4967 1 WASHER
6 2E-Z10326 1 WIRE # 11, WIRE KIT ASSEMBLY 120V
2E-Z10460 1 WIRE # 11, WIRE KIT ASSEMBLY 230CE/240V
7 2E-Z10326 1 WIRE #12, WIRE KIT ASSEMLBY 120V
2E-Z10460 1 WIRE #12, WIRE KIT ASSEMLBY 230CE/240V
8 2E-Z10326 1 WIRE (GND), WIRE KIT ASSEMBLY 120V
2E-Z10460 1 WIRE (GND), WIRE KIT ASSEMBLY 230CE/240V
9 C3-G8030 1 SHELL ASSEMBLY, 8 OZ.
10 2C-2559 3 NUT-ACORN
11 2R-Y8892 1 HANDLE
12 2P-Y8092 1 RETAINING RING
13 2C-Y9767 2 WASHER
14 2P-Y8061 1 SPRING
15 2A-Y8891 1 ROD-CATCH
16 2A-Y8022 1 SET SCREW
17 2A-Y8051 2 STOPPER
18 2C-H8670 4 WASHER
19 2C-1493 4 SCREW
20 C3-Y7886-1 1 CHANNEL RUBBER
21 2C-2560 8 NUT
22 2C-1827 10 EXT. WASHER
23 C3-Y8043 3 CLAMP
24 C3-8690 2 JUMPER-SHORT 120V
25 2E-Z10326 1 WIRE #17, WIRE KIT ASSEMLBY 120V
2E-Z10460 1 WIRE #17, WIRE KIT ASSEMLBY 230CE/240V
26 C3-Z5627 1 JUMPER 120V
C3-Z5625 1 LUG G12-120V
27 2T-6213 2 THERMOSTAT 120V (#G1205193 & BELOW)
2T-Y7422 2 THERMOSTAT 120V (#G1205194 & ABOVE)
2T-Y9453 2 THERMOSTAT 230CE/240V (#G1205218 & ABOVE)
28 2N-Y5592 1 ELEMENT HEATING 1420 WATT 120V
2N-Y5593 1 ELEMENT HEATING 1420 WATT 240V/230CE
29 2N-Y5594 1 ELEMENT HEATING 300 WATT 120V
2N-Y5595 1 ELEMENT HEATING 300 WATT 240V/230CE
30 2A-Y8027 1 SPACER-LONG
31 2A-Y8028 2 SPACER
32 2F-Z0019 1 PLATE-KETTLE
33 C3-G8029-PS 1 KETTLE LINER ASSEMBLY, STUDS
34 PS-G1499 1 HIGH LIMIT THERMOSTAT REPL. KIT 120V
2T-Z10182 1 HIGH LIMIT THERMOSTAT, manufactured after Aug. 2007 120V/230CE/240V
35 2E-Z10326 1 WIRE #17, WIRE KIT ASSEMLBY 120V
36 2E-Z10460 1 WIRE #17, WIRE KIT ASSEMLBY 230CE/240V
37 2C-Z0006 2 SCREW
38 2C-2556 2 NUT
39 2C-1825 2 LOCKWASHER
40 2C-1811 2 WASHER 1/4"
NI C3-Z5637 4 SLEEVING 4.5", WIRE 120V/240V

Part

Number

Per

Unit

Description

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

22

20

2

42

43

44

32

28

29

30

3

5

4

7

6

10

11

9

24

24

25

27

23

26

1

8

17

21

19

15

18

46

41

37

33

36

45

40

38

34

39

16

12

13

14

48

47

51

49

50

54

55

56

58

57

22

31

35

34

60

59

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - G14/G18
14 / 18 oz. 120/240V/230CE

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

SK1181 REV. D 11/22/10

52

23

PARTS LIST December 12, 2011, Rev. O

G14/G18 120V/240V/230CE

Key

Number

- 2E-Y8802 1 RECEPTACLE - WALL 120V

- 2M-Y8601 1 LABEL STRIPE YELLOW/BLUE

- 2M-Y8352 1 LABEL STRIPE BLACK
1 2M-Z9300 1 LABEL-PANEL
2 2E-Z9310 2 SWITCH manufacture after serial number G1404363 G14
2E-Z9310 3 SWITCH manufacture before serial number G1404363 G14
2E-Z9310 2 SWITCH manufacture after serial number G1801677 G18
2E-Z9310 3 SWITCH manufacture before serial number G1801677 G18
3 C3-Y7952 1 BRACKET CATCH
4 2R-Y7844 2 CATCH MAGNETIC
5 C3-Y7953 1 COVER BRACKET
6 C3-Y7377 2 BRACKET HINGE-LEFT
7 C3-Y7446 2 BRACKET HINGE-RIGHT
8 C3-Y8188 1 LOWER DOOR
9 C3-Y7475 2 DOOR PULL ASSEMBLY
10 C3-G1476 1 LEFT DOOR ASSEMBLY
11 C3-G1475 1 RIGHT DOOR ASSEMBLY
12 2L-Y8863 1 CUP-OIL MEASURE 2 CUP (PLASTIC)
13 2L-Y8812 1 2 CUP MEASURE (PLASTIC)
14 2L-Y4916 1 SCOOP-POPCORN (PLASTIC)
15 C3-G1435 1 CORD SET ASSEMBLY 120V
C3-G8022 1 CORD SET ASSEMBLY 240V
2E-Z0151 1 CORD SET ASSEMBLY 230CE
16 2K-Y2968 1 BUSHING-STRAIN RELIEF 120V/240V
17 C3-Y8428 1 CORN DRAWER
18 2A-6904 4 FOOT
NI 2P-Y3404 4 PLUG
NI 2C-1557 4 SCREW 10 X 24-1 1/2 STL RHP
19 2E-Y2849 1 BLOCK TERMINAL
20 2P-6475 9 CLIP-TY
21 2N-Y8727 1 ELEMENT 80 WATT 120V
2N-Y8430 1 ELEMENT 80 WATT 240V/230CE
22 2K-Y1139 1 BUSHING HEYCO
23 2Q-Y7831 2 GLASS - SIDE
24 2I-Y7838 4 CHANNEL GLASS (SIDE - TOP & BOTTOM)
25 2I-Y7840 6 CHANNEL GLASS (UPRIGHT)
26 2Q-Y8605 1 GLASS-FRONT
27 2I-Y7839 2 CHANNEL GLASS (FRONT - TOP & BOTTOM)
28 2E-Y8212 1 LAMP SOCKET
2E-Y9433 1 SOCKET LAMP 230CE
29 2S-Y2238 1 LAMP - 250 WATT 120V
2S-Y8346 1 LAMP - 250 WATT 240V
2S-Y8712 1 LAMP -150 WATT 230CE
30 2B-Y7829 1 LAMP SHIELD
31 2E-Y8380 1 CONTACTOR 120V
2E-Y8381 1 CONTACTOR 240V - N/A ON 230CE VERSION
32 2E-Y8286 1 OUTLET LOCKING 120V
2E-Z0089 1 FLANGED OUTLET, 15A 250V 230CE/240V after 8/1/2002
2E-Y8290 1 OUTLET, LOCKING 15A, 250V 240V/ before 8/1/2002
33 2A-Y8645 1 PIN STOPPER - SHORT
34 2C-1811 2 BURR
35 2C-Y8646 1 SCREW
36 2A-Y8032 1 PIN STOPPER

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Part

Number

MODEL

Number

Unit

Per

Description

Star International Holdings, Inc. Company

24

PARTS LIST December 12, 2011, Rev. O

G14/G18 120V/240V/230CE

Key

Number

37 2F-Y8757 1 HANGER REAR
38 2C-2581 2 NUT
39 2C-Y8147 1 SCREW
40 2A-Y8271 1 ROD SPACER
41 2F-Y8757 1 HANGER FRONT
42 2R-Y4810 1 FAN
43 PS-G8101 1 2U-Y8213, MOTOR REPL KIT, 120V
PS-G8102 1 2U-Y8214, MOTOR REPL KIT, 240V/230CE
44 2I-Y6709 1 CUSHION - MOTOR
45 2C-9398 4 SCREW
46 2C-1823 6 WASHER
47 C3-G1487 1 LID ASSEMBLY - RIGHT
48 2R-Y8379 1 TAB COVER
49 2B-Y8125 1 BLADE AGITATOR
50 2A-Y8026 1 COLLAR - AGITATOR
51 C3-G1488 1 LID ASSEMBLY - LEFT
52 2F-Z6502 1 CROSS BAR
54 2A-Y7928 2 KNOB
55 C3-G1418 1 SHAFT ASSEMBLY
2C-T1008 1 GROOVE PIN
56 2D-Y8044 1 SPINNER TOP
57 2C-Y8146 1 SCREW
58 2A-G1414 1 SHAFT-MOTOR ASSEMBLY
59 2E-Y9253 1 INLET 230CE ONLY
60 2R-Y6763 1 KNOB 230CE

Part

Number

MODEL

Number

Unit

Per

Description

2

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

25

20

2

42

43

44

32

28

29

30

3

5

4

7

6

10

11

9

24

24

25

27

23

26

1

8

17

21

19

15

18

46

41

37

33

36

45

40

38

34

39

16

12

13

14

48

47

51

49

50

52

54

55

56

58

57

22

31

59

60

61

60

61

34

35

63

62

STAR MANUFACTURING INTERNATIONAL, INC.

MODEL - G14AT/G18AT,
14 / 18 oz. 120/240V/230CE

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

SK1186 REV. E 11/22/10

26

PARTS LIST December 12, 2011, Rev. O

G14AT/G18AT 120V/240V/230CE

MODEL

Number

Key

Number

- 2E-Y8802 1 RECEPTACLE - WALL 120V G14
1 2M-Z9301 1 LABEL-PANEL-RED
2 2E-Z9310 2 SWITCH manufacture after serial number G1404363 G14
2E-Z9310 3 SWITCH manufacture before serial number G1404363 G14
2E-Z9310 2 SWITCH manufacture after serial number G1801677 G18
2E-Z9310 3 SWITCH manufacture before serial number G1801677 G18
3 C3-Y7952 1 BRACKET CATCH
4 2R-Y7844 2 CATCH MAGNETIC
5 C3-Y7953 1 COVER BRACKET
6 C3-Y7377 2 BRACKET HINGE-LEFT
7 C3-Y7446 2 BRACKET HINGE-RIGHT
8 C3-Y8188 1 LOWER DOOR
9 C3-Y7475 2 DOOR PULL ASSEMBLY (INC. IN DOOR ASSY.)
10 C3-G1478 1 LEFT DOOR ASSEMBLY
11 C3-G1477 1 RIGHT DOOR ASSEMBLY
12 2L-Y8863 1 CUP-OIL MEASURE 2 CUP (PLASTIC)
13 2L-Y8812 1 2 CUP MEASURE (PLASTIC)
14 2L-Y4916 1 SCOOP-POPCORN (PLASTIC)
15 C3-G1435 1 CORD SET ASSEMBLY 120V G14
C3-G8022 1/1 CORD SET ASSEMBLY 240V G14 / G18
2E-Z0151 1 CORD SET ASSEMBLY 230CE
16 2K-Y2968 1 BUSHING - STRAIN RELIEF - N/A ON 240VE VERSION
17 C3-Y8428 1 CORN DRAWER
18 2A-6904 4 FOOT
NI 2P-Y3404 4 PLUG
NI 2C-1557 4 SCREW 10 X 24-1 1/2 STL RHP
19 2E-Y2849 1 BLOCK TERMINAL
20 2P-6475 9 CLIP-TY
21 2N-Y8727 1 ELEMENT 80 WATT 120V
2N-Y8430 1 ELEMENT 80 WATT 240V/230CE
22 2K-Y1139 1 BUSHING - HEYCO
23 2Q-Y8512 2 GLASS - SIDE
24 2I-Y7838 4 CHANNEL GLASS (SIDE - TOP & BOTTOM)
25 2I-Y7840 6 CHANNEL GLASS (UPRIGHT)
26 2Q-Y8511 1 GLASS - FRONT
27 2I-Y7839 2 CHANNEL GLASS (FRONT - TOP & BOTTOM)
28 2E-Y8212 1 LAMP SOCKET
2E-Y9433 1 LAMP SOCKET 230CE
29 2S-Y2238 1 LAMP - 250WATT 120V
2S-Y8346 1 LAMP - 250WATT 240V
2S-Y8712 1 LAMP -150 WATT 230CE
30 2B-Y7829 1 LAMP-SHIELD
31 2E-Y8380 1 CONTACTOR 120V
2E-Y8381 1 CONTACTOR 240V - N/A ON 230CE VERSION
32 2E-Y8286 1 OUTLET LOCKING 20A 120V
2E-Z0089 1 OUTLET, STRAIGHT BLADE 230CE/240V
33 2A-Y8645 1 PIN STOPPER - SHORT
34 2C-1811 2 BURR
35 2C-Y8646 1 SCREW
36 2A-Y8032 1 PIN STOPPER
37 2F-Y8757 1 HANGER-REAR
38 2C-2581 2 NUT

Part

Number

Per

Unit

Description and Model Designation

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company.

27

PARTS LIST December 12, 2011, Rev. O

G14AT/G18AT 120V/240V/230CE

MODEL

Number

Key

Number

39 2C-Y8147 1 SCREW
40 2A-Y8271 1 ROD SPACER
41 2F-Y8757 1 HANGER - FRONT
42 2R-Y4810 1 FAN
43 PS-G8101 1 2U-Y8213, MOTOR REPL KIT, 120V
PS-G8102 1 2U-Y8214, MOTOR REPL KIT, 240V/230CE
44 2I-Y6709 1 CUSHION - MOTOR
45 2C-9398 4 SCREW
46 2C-1823 6 WASHER
47 C3-G1487 1 LID ASSEMBLY - LEFT
48 2R-Y8379 1 TAB-COVER
49 2B-Y8125 1 BLADE AGITATOR
50 2A-Y8026 1 COLLAR - AGITATOR
51 C3-G1488 1 LID ASSEMBLY - RIGHT
52 2F-Z6502 1 CROSSBAR
54 2A-Y7928 2 KNOB
55 C3-G1418 1 SHAFT - ASSEMBLY
56 2D-Y8044 1 SPINNER TOP
57 2C-Y8146 1 SCREW
58 2A-G1414 1 SHAFT - MOTOR ASSEMBLY
59 2L-Y8762 1 ANTIQUE TOP
60 C3-Y8490 2 TRIM TOP - SHORT
61 C3-Y8489 2 TRIM TOP - LONG
62 2E-Y9253 1 INLET 230CE
63 2R-Y6763 1 KNOB

Part

Number

Per

Unit

Description

2

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

2

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Star International Holdings, Inc. Company

28

14 / 18 OZ. 120/240V/230CE

SK1184

MODEL G14 / G18

Rev. D 3/29/12

STAR MANUFACTURING INTERNATIONAL, INC.

12

11

5

3

10

9

2

14

15

16

17

22

35

1

33

34

4

24

36

31

7

8

20

19

18

22

21

26

30

32

21

23

25

27

28

6

13

39

38

37

40

41

42

7

8

26

27

6

3938

Sold as a kit

29

PARTS LIST December 12, 2011, Rev. O

G14/G18 - 14/18 OUNCE KETTLE 120V/240V/230CE

MODEL

Number

Key

Number

- C3-G1497 1 KETTLE ASSEMBLY COMPLETE 120V G14

- C3-G1495 1 KETTLE ASSEMBLY COMPLETE 230CE/240V G14

- C3-G1494 1 KETTLE ASSEMBLY COMPLETE 230CE/240V G18
1 2P-Y8285 1 PLUG 20A 125V 120V
2P-Z0017 1 PLUG, STRAIGHT BLADE 230CE/240V on or after 8/1/2002
2P-Y8289 1 PLUG 15A250V NEMA L6-15P, 230CE/240V before 8/1/2002
2 2K-3831 2 BUSHING
3 2E-Y8405 1 CONDUIT
4 2E-1177 1 CONNECTOR
5 2E-Y4967 1 WASHER
6 2E-Z10326 1 WIRE (GND) WIRE ASSEMBLY KIT 120V
2E-Z10461 1 WIRE (GND) WIRE ASSEMBLY KIT 230CE/240V
7 2E-Z10326 1 WIRE #15, WIRE ASSEMBLY KIT 120V
2E-Z10461 1 WIRE #15, WIRE ASSEMBLY KIT 230CE/240V
8 2E-Z10326 1 WIRE #16, WIRE ASSEMBLY KIT 120V
2E-Z10461 1 WIRE #16, WIRE ASSEMBLY KIT 230CE/240V
9 C3-G1417 1 SHELL ASSEMBLY
10 2C-2559 3 NUT-ACORN
11 2R-Y8892 1 HANDLE
12 2P-Y8092 1 RETAINING RING
13 2C-Y9767 2 WASHER
14 2P-Y8061 1 SPRING
15 2A-Y8891 1 ROD-CATCH
16 2A-Y8022 1 SET SCREW
17 2A-Y8051 2 STOPPER
18 2C-H8670 4 WASHER
19 2C-1493 4 SCREW
20 C3-Y7886-2 1 CHANNEL RUBBER
21 2C-1827 12 WASHER
22 2C-2560 12 NUT
23 C3-Y8133 3 CLAMP-ELEMENT
24 C3-Y8043 2 CLAMP
25 C3-Z5627 1 JUMPER 120V
2E-Z10461 1 WIRE #15, WIRE ASSEMBLY KIT 230CE/240V
26 2E-Z10326 1 WIRE #19, WIRE ASSEMBLY KIT 120V
2E-Z10326 1 WIRE #25, WIRE ASSEMBLY KIT 230V/240V
27 2E-Z10326 1 LUG-RIGHT, WIRE ASSEMBLY KIT 120V
C3-Y8335 1 LUG-RIGHT 240V
28 C3-Z5626 1 LUG 120V G14
30 2T-6213 2 THERMOSTAT 120V (#G1403752, G1801299 & BELOW)
2T-Y7422 2 THERMOSTAT 120V (#G1403753, G1801300 & ABOVE)
2T-Y9453 2 THERMOSTAT 230CE/240V (#G1403748, G1801300 & ABOVE)
2T-6213 2 THERMOSTAT 240V (BELOW #G1801299, ENCLOSED STYLE)
31 2N-8631 1 ELEMENT1600 WATT 120V G14
2N-8633 1/1 ELEMENT 1600 WATT 230CE/240V G14 / G18
32 2N-8634 1 ELEMENT 800 WATT 230CE/240V G18
2N-Y8283 1 ELEMENT 400 WATT 230CE/240V G14
2N-Y8282 1 ELEMENT 400 WATT 120V G14
33 2A-Y8275 1 SPACER-LONG
34 2A-Y8276 2 SPACER
35 2F-Z0020 1 PLATE-KETTLE
36 C3-G1422-PS 1 KETTLE LINER ASSEMBLY
37 PS-G1499 1 G14 & G18, HIGH LIMIT REPLACEMENT KIT 120V/230CE
2T-Z10182 2 HIGH LIMIT THERMOSTAT , manufactured after Aug. 2007 120V/230CE/240V
38 2E-Z10326 1 WIRE #24, WIRE KIT ASSEMBLY 120V/230CE/240V
39 2E-Z10326 2 WIRE #23, WIRE KIT ASSEMBLY 120V/230CE/240V
40 2C-Z0006 2 SCREW
41 2C-2556 2 NUT
42 2C-1825 2 LOCKWASHER

1

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

1

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Part

Number

Per

Unit

Description and Model Designation

Star International Holdings, Inc. Company

30

STAR INTERNATIONAL HOLDINGS INC. COMPANY

Star - Holman - Lang - Wells - Bloomeld - Toastmaster

10 Sunnen Drive, St. Louis, MO 63143 U.S.A.

[phone]

www.star-mfg.com