GAI-Tronics 774-001 User Manual

Pub. 42004-179A

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model 774-001

Port able Station Enclosure

Confidentiality Notice

This manual is pr ovided s olely as a n op erat ional, installation, and maintenance guide and contains sens itive
bus ines s and t echnic al infor ma tion tha t is confident i al and p roprietary to G AI-Tronics. GAI-Tronics
retains a ll intellectual pr operty and other rights in or to t he inf ormation c ontained herein, and s uch
informa tion may only be used in connection wit h the operation of you r GAI- Tronic s pr oduct or system.
This ma nual may not be disclosed in any form, in whole or in p art, dir ec tly or indirectly, to any t hird pa rty.

General Information

GAI-Tronics offers the Model 774-001 Portable Station Enclosure, which when used in conjunction with a
Model 701-302 or Model 701-304 Handset/Speaker Amplifier, is ideal for extensive facilities where it is
not desirabl e t o inves t in hands et sta tions for all p ossible locations.

The Model 774-001 is easily transported with the attached carrying handle, and the 25-foot cable provides
mobility to t he user.

Figure 1. View of Model 774-001 with front panel removed

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374  800-492-1212  Fax : [phone]

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

V

Pub. 42004-179A

Model 774-001 Portable Station Enclosure Page:

2 of 4

Installation

The Model 774-001 plugs directly into a Model 773-001 Outdoor Ja c k Sta tion. There is no c ustomer
wiring required for the Model 774-001. The Model 774-001 works with either a Model 701-302 or
701-304 Handset/Speaker Amplifier.

To i n stall the handset station, a l i g n the holes in the enclo sure wit h the screws in t h e four corners of the
handset station. To secure the handset when the station is being moved, the Model 774-001 includes a
handset reta iner as sembly. T o insta ll the retainer a ssembly, align the two holes in the holder plate with t he
two bot tom holes of the handset s tat ion. Secure the assembly u sing the exis ting screws. The handset ca n
now be fir mly snapped into pla c e while transporting the stat ion. See Fi gu re 3 for deta ils.

Figure 2. Side and Rear View of Model 774-001

\\s_eng\gtc proddoc s \ s t andard iom s - current release\42004 inst r. m anuals \ 42004-179a. doc

10/00