TABLE OF CONTENTS
Operation and maintenance manual
Before using the machine, please read the attached operating instructions.
Carefully read the safety rules
Manuale uso e manutenzione
Prima di utilizzare la macchina consultare le presenti istruzioni.
Leggere attentamente le norme di sicurezza
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire, electric shock and injury to person do not immerse
cord, plugs, or machine in water or other liquid.
4. Close supervision is necessary when the appliance is used by or near
children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair or
adjustment.
7. The use accessory attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
8. Do not use outdoors.
9. Do not let cords hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
12. Do not use appliance for than intended use.
13. Save this instructions.
SAVE THESE INSTRUCTIONS
CAUTION
This appliance is for household use only. Any servicing, other than cleaning and
user maintenance, should be performed by an authorized service centre. Do
not immerse machine in water. To reduce the risk of fire or electric shock, do not
disassemble the machine. There are no parts inside the machine serviceable
by the user. Repair should be done by authorized service personnel only.
1 Check voltage to be sure that the voltage indicated on the nameplate
corresponds with your voltage.
2 Never use warm or hot water to fill the water tank. Use cold water only.
3 Keep your hands and the cord away from hot parts of the appliance during
operation.
4 Never clean with scrubbing powders or harsh cleaners. Simply use a soft
cloth dampened with water.
5 For optimal taste of your coffee, use purified or bottled water. Periodic
descaling is still recommended every 2-3 months.
6 Do not use caramelized coffee
INSTRUCTIONS FOR THE POWER
SUPPLY CORD
A. A short power-supply cord (or detachable power-supply cord) is to be
provided to reduce risks resulting from becoming entangled in or tripping
over a longer cord.
B. Longer detachable power-supply cords or extension cords are available and
may used if care is exercised in their use.
C. If a long detachable power-supply cord or extension cord is used,
1. The marker electrical rating of the detachable power-supply cord or
extension cord should be at least as great as the electrical rating of the
appliance
2. If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord, and
3. The longer cord should be arranged so that it will not drape over the counter
top or table top where it can be pulled on by children or tripped over.
2
TABLE OF CONTENTS
GENERAL INFORMATION .................................................................................................................................3
MACH INE ........................................................................................................................................................4
ACCESSORIES ....................................................................................................................................................................4
INSTA LL ATION ................................................................................................................................................5
STARTING THE MACHINE ........................................................................................................................................................5
MANUAL PRIMING OF THE WATER CIRCUIT ....................................................................................................................................6
SETTING THE LANGUAGE AND THE CLOCK ....................................................................................................................................6
"AQUA PRIMA" FILTER ..........................................................................................................................................................7
DISPLAY .........................................................................................................................................................8
CHOOSE COFFEE AROMA ........................................................................................................................................................8
ADJ UST ME NT S ...............................................................................................................................................9
COFFEE INTENSITIY ..............................................................................................................................................................9
ADJUSTING THE HEIGHT OF THE DRIP TRAY. .................................................................................................................................9
FILLING THE MILK CONTAINER..................................................................................................................................................9
BEVERAGE DISPENSING ................................................................................................................................10
ESPRESSO / COFFEE / LONG COFFEE .......................................................................................................................................10
DISPENSING BEVERAGES WITH GROUND COFFEE ........................................................................................................................... 11
HOT WATER DISPENSING ......................................................................................................................................................12
LATTE MACCHIATO .............................................................................................................................................................12
ESPRESSO MACCHIATO ........................................................................................................................................................14
CAPPUCCINO ...................................................................................................................................................................14
DISPENSING HOT MILK ........................................................................................................................................................15
BEVERAGE PROGRAMMING ..........................................................................................................................15
BEVERAGE PROGRAMMING MENU ............................................................................................................................................ 15
ESPRESSO / COFFEE / LONG COFFEE PROGRAM ...........................................................................................................................15
PROGRAMMING MILK BEVERAGES ............................................................................................................................................ 16
PROGRAMMING THE MACHINE .....................................................................................................................18
MACHINE SETTINGS ...........................................................................................................................................................18
LANGUAGE MENU ............................................................................................................................................................. 19
CUP ILLUMINATION MENU .................................................................................................................................................... 19
AQUA PRIMA FILTER MENU ................................................................................................................................................... 19
WATER HARDNESS MENU ....................................................................................................................................................20
RINSE MENU ...................................................................................................................................................................20
CUP WARMING PLATE MENU ................................................................................................................................................. 21
ACCOUSTIC TONES AND ALARMS MENU....................................................................................................................................21
DISPLAY MENU ................................................................................................................................................................ 21
BEVERAGE SETTINGS ..........................................................................................................................................................22
ADJUSTMENT OF THE COFFEE BREW TEMPERATURE ..................................................................................................................... 22
AROMA ADJUSTMENT FOR COFFEE BREWING..............................................................................................................................23
PREBREWING ADJUSTMENT (ONLY COFFEE BEVERAGES) ................................................................................................................23
ADDITIONAL FUNCTIONS ......................................................................................................................................................24
COFFEE OF THE WORLD FUNCTION ......................................................................................................................................... 24
DEMO MODE ................................................................................................................................................................... 26
BEVERAGE COUNTER FUNCTION ............................................................................................................................................. 26
MAINTENANCE..................................................................................................................................................................27
MILK CIRCUIT RINSE CYCLE ..................................................................................................................................................27
MILK CIRCUIT WASH CYCLE .................................................................................................................................................. 28
COFFEE CIRCUIT CLEANING CYCLE (BREW GROUP WASH CYCLE) ....................................................................................................... 31
BLOCK DISPLAY .............................................................................................................................................................. 31
DESCALING .................................................................................................................................................................... 32
CLOCK SETTINGS ..............................................................................................................................................................34
TIME SETTING ................................................................................................................................................................. 34
AUTOMATIC TIMER SETTINGS................................................................................................................................................ 35
ENERGY SAVING SETTINGS ...................................................................................................................................................37
SPECIAL .........................................................................................................................................................................38
FACTORY SETTINGS ........................................................................................................................................................... 38
CLEANING AND MAINTENANCE ....................................................................................................................39
MAINTENANCE DURING OPERATION ..........................................................................................................................................39
GENERAL MACHINE CLEANING ................................................................................................................................................39
MILK CONTAINER MAINTENANCE AND CLEANING...........................................................................................................................40
CLEANING THE BREW GROUP .................................................................................................................................................42
GRINDER MAINTENANCE ......................................................................................................................................................43
ERROR CODES ..............................................................................................................................................44
TECHNICAL DATA ..........................................................................................................................................45
SAFETY RULES .............................................................................................................................................46
GENERAL INFORMATION
The coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It
includes an automatic device for preparing milk beverages and a hot water dispenser.
The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or
professional use.
Warning: no liability is assumed for any damage caused by:
• Incorrect use not in accordance with the intended uses;
• Repairs not carried out by authorized customer service centers;
• Tampering with the power cord;
• Tampering with any part of the machine;
• The use of non-original spare parts and accessories;
• Failure to descale the machine or use at temperatures below 0°C.
IN THESE CASES, THE WARRANTY IS NOT VALID.
A WARNING TRIANGLE DRAWS ATTENTION TO ALL THE INSTRUCTIONS THAT
ARE IMPORTANT FOR USER SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS
CAREFULLY TO AVOID SERIOUS INJURY!
3
HOW TO USE THESE OPERATING INSTRUCTIONS
Keep these operating instructions in a safe place and make them available to anyone else who may use the coffee
machine. For further information or if you experience problems not completely or suffi ciently addressed in these
instructions, please contact an Authorized Customer Service Center.
KEEP THESE INSTRUCTIONS
4
MACHINE
Open coffee bean hopper
Cup warming plate
TOUCH SCREEN Display
SBS System
Dispensing head
Drip tray + grill and fl oat
Compartment for milk
container
button
Milk compartment
button
Hot water spout
Coffee bean hopper
Coffee bean hopper cover
Compartment for preground coffee
Main switch
Service door
Coffee grounds drawer
Button for raising/lowering
the drip tray
Water tank
ACCESSORIES
Grinder
adjustment key
Lubricant for the
brew group
Cappuccinatore
maintenance kit
Cleaning detergent
(Brew group)
Socket for
power cord
"Aqua Prima" Filter
Detergent for cleaning
milk container
Brew group
Drip tray
Water hardness
tester
Ground coffee
measuring scoop
INSTALLATION
STARTING THE MACHINE
Make sure that the main power button is not switched to the “ON” position.
1 2 3
5
Press the button on the coffee
hopper to open the cover. Fill the
hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the “max”
level indicated on the water tank.
Once fi lled place the tank back
into the machine.
7
Close the cover pushing it down
completely.
Attach the female end of the
power cord to the machine. Insert
the male end into the power
outlet.
The machine automatically
primes the water circuit.
The machine is now ready
for use.
Remove the water tank.
We recommend installing the "Aqua
Prima" fi lter (see page 7).
65
Place a container beneath the hot
water spout.
Water may not be dispensed
into the glass.
This should not be considered
a malfunction.
Press the main switch once to turn
on the machine. The appliance
automatically performs a diagnosis
of its functions. This test is
performed each time the machine
is turned on.
TO ASSESS WATER HARDNESS, SEE "WATER
HARDNESS MENU" ON PAGE 20.
6
INSTALLATION
MANUAL PRIMING OF THE WATER CIRCUIT
Manually prime the water circuit only when display (2) appears.
Note: fi rst make sure that the water tank is full.
Important: before performing the circuit priming, position the SBS system (see page 9) as shown on the
display. Then adjust as desired.
priming the machine
1 3
2
position the SBS system as shown
start
Position a container under the hot
water spout (it is possible that
water will not come out of the
spout).
Press the display once and the
machine will begin priming the
water circuit.
When the prime circuit cycle is
fi nished, remove the container.
The machine is now ready for
use.
SETTING THE LANGUAGE AND THE CLOCK
When the machine is switched-on for the fi rst time, it requires the selection of the desired language.
This allows you to adjust the parameters of the beverages to the typical parameters of the country
where the machine is used. This is why some languages are differentiated also by country.
1
deutsch
français
italiano (ch)
language
1/2
Italiano (i )
english
nederlands
Select the desired language.
Press
for the other languages.
4
self-test
2
deutsch
français
italiano (ch)
ok
language
1/2
Italiano (i )
english
nederlands
ok
Press to select the desired
language.
4
self-test
3
deutsch
français
italiano (ch)
Press “ok”.
5
See manual on page 34 to
adjust the clock.
language
1/2
Italiano (i )
english
nederlands
ok
demo
The machine starts and displays
the menu in the selected
language.
demo
If desired, the “demo” function (see page 26)
may be activated by pressing the key, each time
the machine carries out a self-diagnosis.
«AQUA PRIMA» FILTER
To improve the quality of the water used, install the "Aqua Prima" fi lter. After installation, go to the
fi lter activation program (see programming). In this mode the machine advises the user when the
fi lter must be replaced.
7
1 2
Remove the "Aqua Prima" fi lter
from its packaging. Enter the date
of the current month.
4
Place a container beneath the
hot water spout.
7
language
display
alerts &
acoustic
settings
go back
illumination
machine
settings
restore
default
settings
cup
cup
warmer
water
fi lter
water
hardness
rinsing
back to
menu
Press "water fi lter".
Insert the fi lter in its place within
the empty tank (see fi gure).
Press down until it clicks into
place.
5
show icon
explanation
my custom
coffee
program-
ming
menu
Press "programming menu".
8
inserted
go back
water
fi lter
not
restore
default
settings
save
settings
activate
fi lter
inserted
back to
menu
Press "activate fi lter".
3
Fill the tank with fresh water. Let
the fi lter soak for 30 minutes. After
30 minutes discard the water in the
tank and refi ll with fresh water.
6
machine
settings
specials
tenance
energy
saving
main
menu
main-
beverage
settings
extras
clock
settings
back to
coffee
menu
Press "machine settings".
The machine then activates the "Aqua Prima" fi lter. Wait for the cycle to fi nish automatically.
When the activation cycle ends, the machine proceeds to the choose beverage menu.
NOTE: occasionally, the machine may not dispense the desired quantity of water for the correct water
fi lter initialization. In this case, repeat the operations described from point 6 and following.
8
DISPLAY
It is possible to change the type of display and choose between " icon format" and "text format"
show icon
explanation
Go to the "text
format" menu
ICON FORMAT
my custom
coffee
Beverage
programming
program-
ming
menu
Accessing the
programming menu
Go to the "icon
format" menu
TEXT FORMAT
hot
milk
macchiato
hot
water
show
icon
latte
long
coffee
• To get the desired beverage, press the corresponding symbol on the display.
The machine automatically performs all the necessary operations.
• To make 2 cups, press the beverage symbol twice.
press twice
CHOOSE COFFEE AROMA
The intensity of the color on the cup icon (only valid for coffee beverages) indicates the aroma, or
quantity of coffee to be ground, for preparing the beverage. The greater the quantity of coffee
ground the stronger the coffee will taste.
cappuccino
medium strongmedium
medium strongmedium
my custom
espresso
macchiato
coffee espresso
coffee
program-
ming
menu
weak medium strong
When the machine is programmed to use pre-ground coffee or when a beverage is customized, the
icon is displayed in a different way and/or accompanied by an asterisk (see section on
“programming beverages”.)
pre-ground customization
ADJUSTMENTS
COFFEE INTENSITIY
The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply
turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.
9
SBS SYSTEM
SBS System adjusts the intensity of the brewed
coffee, and can even be adjusted while
brewing. Any adjustment has an immediate
effect on the brewing coffee.
ADJUSTING THE HEIGHT OF THE DRIP TRAY
Adjust the drip tray before dispensing any beverages.
Height adjustable drip tray.
To raise the drip tray, press lightly on the lower part of the button. To lower the tray,
press lightly on the upper part of the button; when the desired height is reached,
release the button.
Note: There is a red fl oater in the drip tray. When it rises, the tray must be emptied
and washed.
FILLING THE MILK CONTAINER
Only the container with the cappuccinatore must be fi lled before preparing beverages with milk. Do not
use milk after the best-before date. (Important! Refer to the instructions for maintenance and cleaning
of the cappuccinatore on page 40).
MILD
COFFEE
MEDIUM
COFFEE
STRONG
COFFEE
Open the milk compartment by
pressing the button and remove
the milk container.
21 3
Remove the cover and pour in the
milk. DO NOT EXCEED THE
MAXIMUM LEVEL shown in the
fi g u r e .
Replace the lid on the container
and place it back in the milk
compartment. Make sure to
carefully close the compartment.
10
BEVERAGE DISPENSING
DISPENSING COFFEE, HOT WATER AND MILK CAN BE INTERRUPTED AT ANY TIME BY
SELECTING THE "STOP ... DISPENSING" BUTTON.
THE DISPENSED MILK CAN REACH HIGH TEMPERATURES: THERE IS A DANGER OF
SCALDING. DO NOT TOUCH IT WITH BARE HANDS.
THE MILK USED MUST HAVE BEEN PROPERLY PRESERVED.
DO NOT USE IT AFTER THE EXPIRATION DATE ON THE PACKAGE.
Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and
Maintenance" (see page 39).
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED WITH
CLEANING THE CONTAINER AND THE MACHINE'S CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briefl y interrupts dispensing in
order to grind the second serving of coffee. Coffee dispensing is then restarted and completed.If a milk
beverage has been chosen, the machine automatically dispenses the milk. If the fi rst coffee is interrupted,
the second will not be dispensed.
ESPRESSO / COFFEE / LONG COFFEE
This procedure shows how to dispense an espresso. To dispense another type of coffee, press the
appropriate icon. Use appropriate espresso or coffee cups so that the coffee will not overfl ow.
1 2
program-
show icon
explanation
my custom
coffee
ming
menu
Choose the beverage and press
the corresponding icon on the
The machine begins grinding the
quantity of coffee entered.
3
espresso
stop
coffee
dispensing
Begin dispensing the selected
beverage.
display: once for 1 cup and twice
for 2 cups.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is
possible to customize this quantity. See page 15.
If you wish to interrupt the dispensing cycle, press the " stop coffee dispensing" button.
DISPENSING BEVERAGES WITH GROUND COFFEE
Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean
hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the
"Beverage programming" chapter on page 15).
WARNING: PUT PRE-GROUND COFFEE IN THE COMPARTMENT ONLY WHEN YOU WISH TO
DISPENSE THIS TYPE OF BEVERAGE.
INSERT ONLY ONE SCOOP OF GROUND COFFEE AT A TIME. TWO CUPS OF COFFEE CANNOT BE
DISPENSED AT THE SAME TIME.
In the example given below, we chose to dispense a long coffee using pre-ground coffee.
The customized choice of using pre-ground coffee is shown on the display with an asterisk next to the
chosen beverage.
11
1 2 3
show icon
explanation
my custom
coffee
program-
ming
menu
Press the appropriate button and
the display will show:
add preground
coffee
start!
go
back
A message appears, reminder the
user to pour ground coffee in the
appropriate compartment.
Pour ground coffee into the preground coffee compartment using
the measuring scoop provided
with the accessories.
4 5
add preground
coffee
start!
go
back
Press the "start! "button to start
dispensing.
stop
coffee
dispensing
Begins dispensing the selected
beverage.
long
coffee
Note:
• After 1 minute from when the message appears (2), if brewing has not started the machine will return to
the main menu and dump any inserted coffee into the coffee grounds drawer.
• If no pre-ground coffee is poured into the compartment, only water will be dispensed.
• If 2 or more scoops of coffee are added, the machine will not dispense the beverage and the coffee in the
compartment will be dumped into the coffee grounds drawer.
12
BEVERAGE DISPENSING
HOT WATER DISPENSING
WHEN THE HOT WATER BEGINS TO DISPENSE, SHORT SPURTS OF HOT WATER MAY BE
DISPENSED WHICH POSE A RISK OF SCALDING. THE HOT WATER SPOUT CAN REACH
HIGH TEMPERATURES: AVOID TOUCHING IT WITH BARE HANDS.
1
program-
show icon
explanation
my custom
coffee
ming
menu
Press the hot water icon once.
LATTE MACCHIATO
SEE INSTRUCTIONS ON PAGE 40 FOR OPTIMAL MILK DISPENSING
Fill the milk container
1
show icon
explanation
Select the beverage and press the
corresponding icon on the
display: once for 1 cup and twice
for 2 cups.
my custom
coffee
program-
ming
menu
2
hot
water
stop
water
dispensing
Begin hot water dispensing.
2
The machine begins grinding the
quantity of coffee entered.
To dispense another cup of
hot water, repeat this
operation.
3
stop
coffee
dispensing
latte
macchiato
stop
milk
dispensing
When the coffee fi nishes grinding,
the machine will automatically
dispense the programmed quantity
of hot milk.
4 5
latte
macchiato
stop
coffee
dispensing
stop
milk
dispensing
Once milk has been dispensed, the
machine automatically prepares the
coffee.
latte
macchiato
add
milk
After this, the machine allows you to
dispense more milk if you wish. This
option remains active for
approximately 2 seconds. To activate,
press the “add milk” button.
6
show icon
explanation
milk
rinsing
my custom
coffee
program-
ming
menu
The “milk rinsing” icon will fl ash
once the machine is done
dispensing in order to clean the
milk circuit. Press the “milk
rinsing” icon to clean the internal
milk circuit.
If the user wishes to continue preparing other drinks the
machine will keep the “milk rinsing” signal active.
After 20 minutes of inactivity, the machine requires the user
to perform a rinsing cycle as described in Step 7.
If the machine is turned off immediately after dispensing a
milk beverage, the next time the machine is turned on it will
require the user to perform a rinsing cycle.
Note: Before performing the “milk rinsing” function make
sure that:
1. an adequate sized container is placed under the
dispensing head
2. the water tank is full of fresh water.
13
my custom
coffee
program-
ming
menu
show icon
explanation
milk
cleaning
After 14 days from the fi rst dispensing of
a milk-based beverage, the message
“milk cleaning” is displayed; it is
advisable to clean the milk circuits as
shown on page 28.
After another 7 days the machine stops
dispensing milk-based beverages and the
milk circuits must be washed; during this
phase, coffee and hot water may be
brewed.
7
milk rinsing cycle
To perform a rinse cycle,
press “start rinsing”.
start
rinsing
8
rinsing milk circuit-
please wait
rinsing...
Wait for the cycle to be completed.
After this, the machine returns to
the main menu.
9
Remove the container and put
it in the refrigerator if it
contains remaining milk.
THIS PROCEDURE MUST BE PERFORMED FOR ALL MILK BEVERAGES!
AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR IF IT
CONTAINS REMAINING MILK.
After performing the rinse cycle, the machine reminds the user to
show icon
explanation
remove
milk
my custom
coffee
program-
ming
menu
remove the container with the remaining milk through the message
“remove milk”.
REMOVE THE MILK CONTAINER ONLY WHEN THE MACHINE IS ON.
THE CONTAINER MAY BE LEFT IN THE MACHINE ONLY IF IT HAS BEEN WASHED WITH
DRINKING WATER AND IT DOES NOT CONTAIN MILK (SEE PAGE 40).
14
BEVERAGE DISPENSING
ESPRESSO MACCHIATO
Fill the milk container
2
31
espresso
macchiato
show icon
explanation
my custom
coffee
program-
ming
menu
Press the icon once for 1 cup and
twice for 2 cups.
4
dispensing
stop
coffee
espresso
macchiato
stop
milk
dispensing
Once the coffee has been brewed,
the machine automatically prepares
the hot milk.
CAPPUCCINO
Fill the milk container
1
show icon
explanation
Press the icon once for 1 cup and
twice for 2 cups.
4 5
cappuccino
stop
coffee
dispensing
my custom
coffee
program-
ming
menu
stop
milk
dispensing
The machine begins grinding the
quantity of coffee entered.
5
espresso
macchiato
add
milk
To dispense more milk, press the
“add milk” icon.
2
The machine begins grinding the
quantity of coffee entered.
cappuccino
add
milk
stop
coffee
dispensing
stop
milk
dispensing
Espresso macchiato begins
brewing.
When the "milk rinsing"
symbol fl ashes, clean the
milk circuits as described for
latte macchiato (see page 12,
Step 6).
3
stop
coffee
dispensing
cappuccino
stop
milk
dispensing
When the coffee fi nishes grinding,
the machine will dispense the
programmed quantity of hot milk.
When the "milk rinsing"
symbol fl ashes, clean the
milk circuits as described for
latte macchiato (see page 12,
Step 6).
Once milk has been dispensed, the
machine automatically prepares the
coffee.
After this, the machine allows you to dispense more milk if you wish.
Press the “add milk” button within 2 seconds.
BEVERAGE PROGRAMMING
15
DISPENSING HOT MILK
1
show icon
explanation
my custom
coffee
program-
ming
menu
Press the hot milk icon once. The hot milk is dispensed.
2
hot
milk
BEVERAGE PROGRAMMING MENU
Each beverage can be programmed according to your individual taste. Customization is shown on the
display with the addition of an asterisk.
To program the desired beverage:
or
show icon
explanation
my custom
coffee
program-
ming
menu
Hold down the beverage button for
two seconds
show icon
explanation
my custom
coffee
Press the button "my coffee" and
within two seconds, press the
beverage button
stop
milk
dispensing
program-
ming
menu
Fill the milk container
To dispense another cup of milk,
repeat this operation.
When the "milk rinsing" symbol
fl ashes, clean the milk circuits as
described for latte macchiato
(see page 12, Step 6).
Once a beverage has been
customized it will only
dispense that type of
beverage. To change or modify
the beverage a new customization must be done.
ESPRESSO / COFFEE / LONG COFFEE PROGRAM
1
select the quantity
of coffee to be
ground (aroma).
show icon
explanation
my custom
coffee
program-
ming
menu
Enter the menu of the beverage to
be customized by pressing and
holding the button for 2 seconds.
return to the
previous
window.
Selecting a different quantity of coffee changes the aroma of the beverage.
In this menu you can:
2
light
medium
strong
go
back
my
espresso
restore
settings
start!
save
settings
preground
save settings.restore factory settings.
select the use
of pre-ground
coffee.
16
BEVERAGE PROGRAMMING
light
3 4
medium
my
espresso
start!
After pressing the start!
button, the brew cycle will
start.
save
settings
preground
strong
go
back
restore
settings
Pressing start! allows the
machine to brew coffee.
custom
coffee
amount
my
espresso
To brew an amount of coffee greater
5
than that preset by the
manufacturer, press “custom
coffee amount” before the end of
stop
coffee
dispensing
6 7
my
espresso
the brew cycle in progress. When
the quantity is reached,
press “stop coffee dispensing”.
If the "save settings" button
is not pressed the machine
returns to the main menu
and the customized settings
will not be saved.
go
back
save
settings
Once the brew cycle fi nishes,
press "save settings" within fi ve
seconds.
custom
coffee
amount
stop
coffee
dispensing
my
espresso
The machine automatically starts and
fi nishes brewing the coffee, according to
the standard settings.
The brew cycle may be
interrupted only by pressing
“stop coffee dispensing”.
If the button is not pressed,
the coffee can overfl ow in
the cup.
my
espresso
saved!
The display shows the confi rmation of
the memorized settings, and the
machine automatically returns to the
main menu.
PROGRAMMING MILK BEVERAGES
1
show icon
explanation
Enter the menu of the beverage to
be customized by pressing and
holding the button for 2 seconds.
my custom
coffee
program-
ming
menu
select the
quantity of
coffee to be
ground.
return to the
previous
window.
In this menu you can:
2
light
my latte
macchiato
restore
settings
start!
save
settings
medium
strong
go
back
preground
save settings.restore factory settings.
Fill the milk tank
select the use
of pre-ground
coffee.
17
light
3
medium
my latte
macchiato
start!
After pressing the start!
button, the brew cycle will
start.
save
settings
preground
strong
go
back
restore
settings
Pressing start! allows the
machine to start the brewing
cycle.
5
custom
coffee
amount
my latte
macchiato
custom
milk
amount
The dispensing cycle may
be interrupted only by
stop
coffee
dispensing
stop
milk
dispensing
pressing “stop milk
dispensing”.
If the button is not pressed,
the milk may overfl ow.
To dispense an amount of milk greater than that preset by the
manufacturer, press “custom milk amount” before the end of the
dispensing cycle in progress. When the quantity is reached, press
“stop milk dispensing”.
custom
coffee
amount
my latte
macchiato
custom
milk
amount
7
The brew cycle may be
interrupted only by pressing
stop
coffee
dispensing
stop
milk
dispensing
“stop coffee dispensing”.
If the button is not
pressed, the coffee may
overfl ow.
To brew an amount of coffee greater than that preset by the
manufacturer, press “custom coffee amount” before the end of the
brew cycle in progress. When the desired quantity is
reached, press “stop coffee dispensing”.
custom
4
coffee
amount
stop
coffee
dispensing
my latte
macchiato
custom
milk
amount
stop
milk
dispensing
The machine automatically starts and
fi nishes dispensing the milk,
according to the standard settings.
custom
6
coffee
amount
stop
coffee
dispensing
my latte
macchiato
custom
milk
amount
stop
milk
dispensing
The machine automatically starts
and fi nishes brewing the coffee,
according to the standard
settings.
8
back
go
my latte
macchiato
settings
save
Once the brew cycle fi nishes,
press "save settings" within fi ve
seconds.
If the "save settings" button
is not pressed the machine
returns to the main menu
and the customized settings
will not be saved.
9
my latte
macchiato
saved!
The display shows the confi rmation of the
saved settings, and the machine
automatically returns to the main menu.
18 PROGRAMMING THE MACHINE
Some of the machine’s functions can
be programmed to customize
operations according to your own
requirements.
show icon
explanation
my custom
coffee
program-
ming
menu
Press the "programming menu" button.
The programming menu will access:
Programming the machine
operations (see page 18)
Special functions
(see page 38)
Maintenance (cleaning the
machine) (see page 27)
machine
settings
specials
main-
tenance
energy
saving
Activate standby
main
menu
beverage
settings
extras
clock
settings
back to
coffee
menu
Exit
After having set each of the following menus, press
- "go back" to return to the previous screen
- "restore default settings" to restore the initial values
- "save settings" to save the settings
- "back to menu" to return to the main menu
MACHINE SETTINGS
When the machine settings are selected the following screen appears. Here you can:
In depth beverage programming
(see page 22)
Extra functions (see page 24)
- Current date and time
- Standby timer
- Times to turn on/turn off over
the span of a day (see page 34).
set the language of the menus.
set the brightness of the
display colors.
set/activate the tones.
set the illuminate cups function.
language
display
alerts &
acoustic
settings
go back
restore
default
settings
cup
illumination
machine
settings
cup
warmer
water
fi lter
water
hardness
rinsing
back to
menu
set the operation of the cup warming plate.
set the machine’s operation
through the “Aqua Prima” fi lter.
set the water hardness.
set the circuit rinse cycle.
“LANGUAGE” MENU
For changing the language of the display.
language
deutsch
français
language
1/2
Italiano (i)
english
19
This function was described at the
beginning of the manual.
This setting is of fundamental
importance for correctly adjusting
the parameters of the machine
according to the country where the
machine is used.
italiano (ch)
nederlands
Press to display the next page.
go back
back to
menu
“CUP ILLUMINATION” MENU
This function allows activating/ deactivating the dispensing area illumination.
In this menu you can:
cup
illumination
cup
illumination
turn off illumination.
off
go back
restore
default
settings
save
settings
on
back to
menu
turn on illumination.
“AQUA PRIMA FILTER” MENU
The "Aqua Prima" fi lter purifi es water and allows you to taste all the aroma of the coffee.
In this menu you can:
water
fi lter
set the machine to
operate without the”Aqua
Prima” fi lter.
not
inserted
go back
restore
default
settings
water
fi lter
save
settings
activate
fi lter
inserted
back to
menu
proceed with the initialization
(cleaning) of the water fi lter (see
page 7). After initialization the
«insert» option is activated.
set the machine to operate
with the “Aqua Prima” fi lter.
Note:
• Press "activate fi lter" each time a new "Aqua Prima" fi lter is installed.
• Press "not inserted" when an "Aqua Prima" fi lter is not used.
• Press “inserted” when an “Aqua Prima” fi lter is used. This function operates even after pressing the
“activate fi lter” button.
20
PROGRAMMING THE MACHINE
“WATER HARDNESS” MENU
To adjust the level of water hardness, shown on a scale of 1 to 4. The machine is preset at a hardness value of 3.
1
2
1234
Immerse the water hardness strip included in
Check the value.
the welcome pack for one second in water.
The test can be used only for
one measurement.
Press the "water hardness" button.
water
hardness
water
hardness
Set the water hardness on the
machine by pressing + or -
go back
restore
default
settings
settings
save
back to
menu
“RINSE” MENU
To clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water
only.
In this menu you can:
Note: This rinse cycle is
performed every time the
machine is turned on when it
rinsing
is cool.
rinsing
deactivate the rinse cycle. activate the rinse cycle.
off
go back
restore
default
settings
save
settings
on
back to
menu
“CUP WARMING PLATE” MENU
To activate the cup warming plate on the upper part of the machine.
In this menu you can:
21
cup
warmer
always
on
keep the cup warming plate
always on.
cup
warmer
keep the cup warming plate
off when the machine is in
stand-by.
off in
standby
go back
restore
default
settings
save
settings
off
back to
menu
keep the cup warming plate
always off.
“ACOUSTIC TONES AND ALARMS” MENU
To activate/deactivate the machine’s acoustic tones. Pressing the button does not immediately change the status.
alerts &
acoustic
settings
activate/deactivate a machine
ready tone.
activate/deactivate a tone
each time a button is pressed.
Note: The tones are divided in the following way:
• Long continuous tone indicates a machine malfunction;
• Brief tone when a button is pressed and to indicate that the machine is ready for use;
• Intermittent tone to indicate that the machine needs to be cleaned.
In this menu you can:
machine ready
tone
off
alerts &
acoustic
settings
key tones
on
go back
restore
default
settings
save
settings
milk quality
alert
off
milk rinsing
alert
off
back to
menu
activate/deactivate a tone that
reminds the user to proceed with
washing the circuits to prepare
milk.
activate/deactivate a tone that
reminds the user to perform the
rinse cycle of the milk circuits (the
tone is activated after one minute
from the beverage brewing).
“DISPLAY” MENU
To set the correct brightness of the display colors, press the “display” button.
display
display
go back
restore
default
settings
settings
save
back to
menu
Adjust the brightness by
pressing + or -
22 PROGRAMMING THE MACHINE
BEVERAGE SETTINGS
To adjust the general brew parameters of the various beverages containing coffee, press the
“beverage settings” button on the main menu.
espresso
coffee
long
coffee
go back
beverage
settings
espresso
macchiato
latte
macchiato
cappuccino
back to
menu
For every single beverage, you can adjust:
temperature
medium
the coffee’s brew temperature.
coffee
settings
the coffee’s
pre-brewing.
prebrewing
normal
go back
restore
default
settings
strength
medium
back to
menu
the quantity of coffee to be ground
and the use of pre-ground coffee.
The current programming status is indicated according to each parameter.
ADJUSTMENT OF THE COFFEE BREW TEMPERATURE
To set the temperature for preparing coffee, press the “temperature” button and select the desired temperature.
temperature
medium
low temperature
medium temperature
high temperature
low
medium
high
go back
coffee
temperature
restore
default
settings
save
settings
back to
menu
“AROMA” ADJUSTMENT FOR COFFEE BREWING
To set the “Aroma” function, that is to say the quantity of coffee to be ground, and to set the use of pre-ground
coffee. You can have your beverage with the quantity of coffee you desire or you can choose to prepare it with
decaffeinated coffee by using the “preground” function.
23
strenght
medium
light
medium
strong
light
medium
strong
go back
strength
restore
default
settings
coffee
save
settings
preground
back to
menu
“PREBREWING” ADJUSTMENT (ONLY COFFEE BEVERAGES)
To set the prebrewing function. The coffee is slightly dampened before brewing, bringing out the full aroma of the
coffee and extracting the best fl avor.
prebrewing
normal
normal prebrewing
normal
strong prebrewing (longer)
deactivate prebrewing
strong
off
go back
coffee
prebrew
restore
default
settings
save
settings
back to
menu
24
PROGRAMMING THE MACHINE
ADDITIONAL FUNCTIONS
There are some additional functions of the machine. Pressing the “extras” button allows you to access the menu
and the following message will appear on the display.
In this menu you can:
access the menu where some of
the most famous recipes in the
world are kept.
coffee
of the
world
demo
activate the “demo” function to
show the machine’s main
functions.
extras
view the quantities of every type
of product brewed.
beverage
counters
go back
restore
default
settings
save
settings
back to
menu
“COFFEE OF THE WORLD” FUNCTION
This function allows the user to prepare coffee according to the most famous recipes in the world.
coffee
of the
world
prepare a true Italian
prepare a typical Italian
ristretto.
espresso.
In this menu you can:
prepare a typical American coffee.
ristretto
espresso
italiano
american
coffee
coffee
of the
café
café creme
world
go back
good morning
coffee
good night
milk
back to
menu
prepare a typical North European
coffee.
prepare a typical French/
Swiss coffee.
prepare a fl avorful latte macchiato
without the fear of not being able
to sleep.
prepare a coffee for a day full
of energy.
If, for example, you want to taste a typical American coffee, you must press the “American coffee” button. In this
case, the following message appears in the display.
25
american coffee
the position of the SBS system knob is
shown with the best cup size to use
go!
go
back
After brewing the desired beverage, it can be saved on one of the icons of the main menu.
american
coffee
do you want to s av e
this beverage?
return to the recipe
preparation menu
no yes
To save the beverage you just made, the display shows the icon that allows this function.
Pressing the
the brewing process.
save the beverage
go!
button starts
This message
remains active for
approximately 5
american
coffee
is now saved under the icon
The beverages in the “Coffee of the World” function, if
saved, will be associated with the following buttons,
and accompanied by an asterisk:
seconds and then
returns to the main
message.
choose an icon to brew it
• ristretto:
• Italian espresso:
• coffee:
• café crème:
• American coffee:
• good morning coffee:
• good night milk:
espresso (small cup)
espresso (small cup)
coffee (medium cup)
coffee (medium cup)
long coffee (glass)
espresso (small cup)
latte macchiato
You can associate only one beverage with a single icon. The original settings can be restored using the “Beverage
Settings” menu.
26
PROGRAMMING THE MACHINE
“DEMO” MODE
This function shows the machine’s potential.
Note: When this function is activated, the machine is in stand-by and all the functions
are disabled. The “demo” mode is saved even when the machine is turned off by the
main switch.
The next time the machine is turned on, the machine will still be in the “demo” mode.
Pressing the demo button on the display shows:
demo
This is the way the “demo” mode
operation begins. The messages that
follow illustrate the machine’s
functionality.
leave demo mode?
no yes
continue the tour exit and activate the
machine’s normal functions
To exit this mode, press anywhere on
the display.
BEVERAGE COUNTER FUNCTION
This function shows how many beverages have been prepared for every single type of beverage.
beverage
counters
beverage counters
hot milk 0
latte macchiato 1
cappuccino 0
espresso macchiato 0
hot water 0
coffee long 15
coffee 0
espresso 0
go back
back to
menu
MAINTENANCE
To clean/maintain all of the machine’s internal circuits, press the “maintenance” button on the main menu.
In this menu you can:
lock the Touch Screen (to
preform cleaning of the display).
begin washing the milk
circuits.
begin rinsing the milk
circuits.
lock
display
milk
cleaning
cycle
milk circuit
rinsing
cycle
go back
maintenance
MILK CIRCUIT RINSE CYCLE
To rinse the machine’s internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If it is not performed, the machine comes to a halt and does not allow the dispensing of milk beverages.
Before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been correctly inserted in the machine;
3. the water tank contains a suffi cient quantity of water.
coffee
cleaning
cycle
descaling
cycle
back to
menu
begin the wash cycle of the brew
group.
perform the descaling cycle.
27
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
milk circuit
rinsing
cycle
start
rinsing
Wait for the cycle to fi nish.
The machine will return to the main
rinsing milk circuit-
please wait
rinsing...
Remove the container, rinse and
dry.
menu.
AFTER USE, ALWAYS REMOVE THE MILK CONTAINER AND PUT IT IN THE REFRIGERATOR.
The container may be left in the machine only if it has been washed with drinking water and it does not contain
milk; see page 40.
28 PROGRAMMING THE MACHINE
MILK CIRCUIT WASH CYCLE
To rinse the machine’s internal circuits used for preparing milk.
This cycle is proposed after 14 days from the fi rst dispensing of a milk-based beverage. After 14 days, the “milk
cleaning” message starts fl ashing (see page 13). Perform the wash cycle as described in this section.
show icon
explanation
milk
cleaning
my custom
coffee
program-
ming
menu
Push the “milk cleaning” button and refer to the instructions below, at step 2. The machine switches to the status
described at point 7.
If the milk circuit wash cycle is not performed after 14 days, the dispensing of milk-based beverages will be still
possible for only 7 more days. After 7 days, the wash cycle must be performed because the dispensing of milk-based
beverages is disabled. (The machine still enables dispensing hot water and coffee).
To remind the user of this important operation, the message “milk cleaning -3” is shown on the display 3 days before
the deadline and is updated on subsequent days.
show icon
explanation
milk
cleaning
-3
my custom
coffee
program-
ming
menu
Before performing this function make sure that:
1. a large enough container is at hand.
2. the milk container has been adequately cleaned of all milk residue.
3. the water tank contains a suffi cient quantity of water.
THE WASH CYCLE CANNOT BE INTERRUPTED. A PERSON MUST BE PRESENT DURING THE OPERATION.
USE ONLY AND EXCLUSIVELY THE PROVIDED DETERGENT.
1
lock
display
milk
cleaning
cycle
milk circuit
rinsing
cycle
go back
maintenance
coffee
cleaning
cycle
descaling
cycle
Select the function by
pressing the “milk cleaning
cycle” button.
back to
menu
2
Open the compartment and
remove the milk container.
3
Insert the content of the
detergent packet into the
container.
Loading...