Gaggenau VP414611 Specification Sheet

Color Variants
VP414611

Stainless steel
Width 15" (38 cm)

Included accessories

2 x spatula.

Product Features
Product name / series name

Vario/Domino Teppan Yaki

Construction type

Built-in

Energy source

Electric

Oven Control

Electronic

Grill grating material
Required cutout size (HxWxD) (mm)

118 x 360 x 490

Width of the product (mm)

380

Overall appliance dimensions (HxWxD)
(mm)

118 x 380 x 520

Product packaging dimensions
(HxWxD) (mm)

400 x 460 x 600

Net weight (kg)

12.280

Gross weight (kg)

16.1

Residual heat indicator

Separate

Location of control panel

Cooktop front

Basic surface material
Color of surface

Stainless steel, Stainless steel

Color of frame

Stainless steel

Approval certificates

Australia Standards, CCC, CE, China,
China ROHS 20, Eurasian, G-Mark,
Ukraine, VDE

Power cord length (cm)

150

Consumption and connection features
Watts (W)

3000

Gas connection rating (W)
Current (A)

16

Volts (V)

208-240

Frequency (Hz)

60

2020-03-06
Page 1

VP414611
Vario 400 series teppan yaki

Stainless steel
Width 15" (38 cm)

Hard chrome-plated surface for
teppan cooking and use as griddle,
grill, searer and warming plate. No
pots or pans necessary.
Exact temperature control up to
480 °F, with warming and cleaning
settings
Optimum heat distribution
Solid stainless steel control knobs
Precision crafted 1/8-inch stainless
steel frame
For surface-mount installation with a
visible edge or for flush installation
Can be perfectly combined with other
Vario 400 series appliances

Cooking zones

Usable area W 31 x D 44 cm.

Operation

Two control knobs with illuminated ring,
cooking position and output marking.
Electronic temperature control from
120 °C to 240 °C.

Features

Two zones, each 1500 W, can be
operated together as a complete
surface or each halve separately.
Keeping warm setting.
Cleaning setting.
Simple to clean surface.

Safety

Safety shut-off.
Pre-heat and residual heat indicator.

Planning notes

Depending on the type of installation
— surface-/ or flush-mounted, with or
without cover — the specific location of
the control knob positions may vary.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
The bearing capacity and stability,
in the case of thin countertops in
particular, must be supported using
suitable substructures. Take into
account the appliance weight and
additional loads.
Additional instructions for flush
mounting:
Flush installation is possible in
countertops made of stone, synthetics
or solid wood. Heat resistance and
watertight sealing of the edges must
be observed. For other materials,
please consult with your countertop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the countertop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of inimum 1 ³¹⁄₃₂" (50 mm) between
the individual cut-outs.
A minimum lateral clearance of at least
40 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 33 lbs (12).

Rating

Total rating: 208/220 - 240 V : 10.8 kW.
60 Hz

Plan for a 37" connecting cable without
plug (hardwire required).

VP414611
Vario 400 series teppan yaki

Stainless steel
Width 15" (38 cm)

2020-03-06
Page 2