Gaggenau VP414111 Specifications Sheet
Color Variants
VP414111
Width 38 cm
Included accessories
2 x spatula.
Installation Accessories
VA420000
Connection strip for combination with
other Vario appliances of the 400 series
for flush mounting
VA420010
Connection strip for combination with
other Vario appliances of the 400 series
for surface mounting
VA440010
Stainless steel appliance cover with
mounting strip
Characteristics
Product name/family
Vario/Domino Teppan Yaki
Built-in / Free-standing
Built-in
Energy input
Electric
Type of control
Electronic
Grill grating material
Required niche size for installation
(HxWxD)
118 x 360 x 490
Width of the product (mm)
380
Dimensions of the product (mm)
118 x 380 x 520
Dimensions of the packed product
(HxWxD) (mm)
400 x 460 x 600
Net weight (kg)
12.276
Gross weight (kg)
16.1
Residual heat indicator
Separate
Location of control panel
Basic surface material
Color of surface
Stainless steel, Stainless steel
Color of frame
Stainless steel
Approval certificates
Australia Standards, CCC, CE, China,
China ROHS 20, Eurasian, G-Mark,
Ukraine, VDE
Length electrical supply cord (cm)
150
EAN code
4242006280130
Consumption and connection features
Electrical connection rating (W)
3000
Gas connection rating (W)
Current (A)
16
Voltage (V)
220-240
Frequency (Hz)
50-60
2019-10-28
Page 1
VP414111
Vario Teppan Yaki 400 series
Width 38 cm
Can be combined perfectly with other
Vario appliances of the 400 series
Cooking directly on the hardchromed metal surface, without any
pots or pans
Exact temperature control up to 240
°C
Optimum heat distribution
Solid stainless steel control knob
Precision crafting of 3 mm stainless
steel
For surface mounting with a visible
edge or for flush mounting
Cooking zones
Usable area 31 x 44cm (WxD)
Handling
2 flexible installation control knobs (1m
connecting cable)
Control knobs with illuminated ring,
cooking zone and temperature
markings.
Electronic temperature control from
120 °C to 240 °C.
Features
Stainless steel
Two zones, each 1500 W, can be
operated together as a complete
surface or each halve separately.
Keep warm setting.
Cleaning stage.
Easy to clean, similar to a cast pan.
Safety
Safety shut-off.
Pre-heat and residual heat indicator.
Operation indicator.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted,
with or without an appliance cover), the
specific location of the cut-out and the
knob positions may vary.
Appliance can be snapped into the
worktop from above.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 23 mm thick (there must be
a recess at the rear).
If installing with the appliance cover
VA 440 or filler strip VA 450 take into
account the additional space required
for the depth.
If combining several appliances with
at least one appliance cover, the filler
strip VA 450 is required to compensate
for the depth of the appliance without
the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least 10
mm for surface mounting and at least
13 mm for flush mounting. Ensure a
continuous cut surface of 90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
A minimum lateral clearance of at least
40 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Appliance weight: approx. 12 kg.
Connection
Total connected load 3.0 kW.
Connecting cable 1.5 m without plug.
VP414111
Vario Teppan Yaki 400 series
Width 38 cm
2019-10-28
Page 2
Loading...