Gaggenau VP414-110 Specifications Sheet
Color Variants
VP414110
Stainless steel
Width 38 cm
Included accessories
2 x spatula.
Installation Accessories
VA420000
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation
VA420001
Connection strip for combination with
other Vario appliances of the 400 series
for flush installation with appliance
cover/adjustment strip
VA420010
Connection strip for combination with
other Vario appliances of the 400 series
for surface installation
VA420011
Connection strip for combination with
other Vario appliances of the 400 series
for surface installation with appliance
cover/adjustment strip
VA440010
Stainless steel appliance cover with
mounting strip
VA450400
Stainless steel adjustment strip 38 cm
Characteristics
Product name/family
Vario/Domino Teppan Yaki
Construction type
Built-in
Energy input
Electric
Type of control
Electronic
Grill grating material
Required niche size for installation
(HxWxD)
72 x 360 x 490
Width of the product (mm)
380
Dimensions of the product (mm)
72 x 380 x 520
Dimensions of the packed product
(HxWxD) (mm)
232 x 455 x 593
Net weight (kg)
14.0
Gross weight (kg)
15.0
Residual heat indicator
Separate
Location of control panel
Basic surface material
Color of surface
Stainless steel, Stainless steel
Color of frame
Stainless steel
Approval certificates
Australia Standards, CCC, CE, China,
China ROHS 20, Eurasian, G-Mark,
Ukraine, VDE
Length of electrical supply cord (cm)
EAN code
4242006213510
Consumption and connection features
Electrical connection rating (W)
3000
Gas connection rating (W)
Current (A)
16
Voltage (V)
220-240
Frequency (Hz)
50; 60
created on 2018-03-27
Page 1
VP414110
Vario teppan yaki 400 series
Stainless steel
Width 38 cm
Cooking directly on the hardchromed metal surface, without any
pots or pans
Exact temperature control up to 240
°C
Optimum heat distribution
Solid stainless steel control knob
Precision crafting of 3 mm stainless
steel
For surface installation with a visible
edge or for flush installation
Can be combined perfectly with other
Vario appliances of the 400 series
Cooking zones
Usable area W 31 x D 44 cm.
Handling
Control knobs with illuminated ring,
cooking zone and temperature
markings.
Electronic temperature control from
120 °C to 240 °C.
Features
Two zones, each 1500 W, can be
operated together as a complete
surface or each halve separately.
Keeping warm setting.
Even with traces of use, always easy to
clean like a cast pan.
Safety
Safety shut-off.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted,
with or without an appliance cover), the
specific location of the cut-out and the
knob positions may vary.
If installing with the appliance cover
VA 440 or adjustement strip VA 450
take into account the additional space
required for the depth.
If combining several appliances with
at least one appliance cover, the
adjustment strip VA 450 is required
to compensate for the depth of the
appliance without the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type
of installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least 10
mm for surface installation and at least
13 mm for flush installation. Ensure a
continuous cut surface of 90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush
installation:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured. Do
not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Built-in control panel to be integrated in
the bottom cabinet at drawer level.
Panel thickness 16 – 26 mm.
The drawing "Installation of the control
knob" must be observed if the panel is
more than 26 mm thick (there must be
a recess at the rear).
A minimum lateral clearance of at least
40 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 14 kg.
Connection
Total connected load 3.0 kW.
Plan a connection cable.
VP414110
Vario teppan yaki 400 series
Stainless steel
Width 38 cm
created on 2018-03-27
Page 2
Loading...