Gas cooktop
V G 295
– Top appliance in the market, 17 kW
on 5 burners
– Solid smooth-surface cast pan
supports
– Automatic fast ignition, electronic
flame monitoring
V G 295 214 AU
Stainless steel with stainless steel
control panel
Width 90 cm
Natural gas 20 mbar
Wok burner with 6 kW
Special accessories
W P 400 001
Wok pan made of multiple-layer
material
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
Cooking zones
1 thr ee-ring wok burner
(300 W – 6000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(160 W – 4000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(160 W – 2000 W), suitable for pots up
to max. ø 24 cm.
Handling
Integrated control panel with cooking
zone and output level markings.
One-handed operation.
Automatic fast ignition.
Features
Three-part cast pan support with flat,
continuous pot surface.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Safety shut-off.
Planning notes
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Air intake from above.
No intermediate shelf required.
Rear panel and wall trims must be
heat-resistant and consist of a
non-flammable material.
Installation in a 90 cm wide lower
cabinet is required.
An oven can be installed under the
cooktop.
Appliance must be fixed from
underneath.
A minimum lateral clearance of at least
300 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 30 – 50 mm.
With a total connected load of more
than 11 kW local regulations
concerning room ventilation, room size
and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 11 kW and
ventilation hood 70 cm.
Appliance weight: approx. 30 kg.
Connection
Total connected load gas 17.0 kW /
61.2 MJ/h.
Power requirements
220 – 240 V / 50 – 60 Hz.
Connecting cable 1.4 m with plug.