Gaggenau CG 492 211 User Manual

Color Variants
CG492211

Stainless steel
Width 100.2 cm

Included accessories

1 x WOK attachment ring.

Optional accessories
WP400001

Wok pan made of multiple-layer
material

Installation Accessories
CA429410

Frame set including decorative frame
(to be welded in) and holding frame

Characteristics
Product name/family

gas hob w integrated controls

Construction type

Built-in

Energy input

Gas

Total number of positions that can be
used at the same time

5

Type of control setting devices
Required niche size for installation

(HxWxD)

157 x 983-983 x 580-580

Width of the product (mm)

1002

Dimensions of the product (mm)

157 x 1002 x 599

Net weight (kg)

35.0

Gross weight (kg)

38.0

Residual heat indicator

Separate

Location of control panel

External control

Type of external control possibility
Basic surface material

brushed stainless steel

Color of surface

Stainless steel

Color of frame

Stainless steel

Approval certificates

CE, DVGW, TSE, VDE

Length of electrical supply cord (cm)

140

EAN code

4242006262082

Consumption and connection features
Electrical connection rating (W)

15

Gas connection rating (W)

18000

Current (A)
Voltage (V)

220-240

Frequency (Hz)

60; 50

created on 2017-03-16
Page 1

CG492211
400 series gas cooktop

Stainless steel
Width 100.2 cm
Natural gas 20 mbar
Wok burner with 6 KW

Five multi-ring burners, up to 18 kW
Automatic fast ignition, electronic
flame monitoring with automatic re­ignition
Simmer function for cooking on a
very low output level
Solid smooth-surface cast pan
supports on the same level as the
worktop
Solid stainless steel control knob

Cooking zones

1 three-ring wok burner (300 W – 6,000
W), suitable for pots up to max. ø 32
cm.
2 two-ring high output burners (165 W –
4000 W), suitable for pots up to max. ø
28 cm.
2 two-ring standard burners (165 W –
2000 W), suitable for pots up to max. ø
28 cm.

Handling

Control knobs with illuminated
ring, cooking zone and output level
markings.
One-handed operation.
Full electronic control in 12 output
levels for exact power level adjustment
plus simmer function.
Automatic fast ignition.

Features

Three-part pan support with flat,
continuous pot surface, on the same
level as the worktop.
Brass burner rings.

Safety

Electronic flame monitoring with
automatic re-ignition.
Residual heat indication.
Safety shut-off.

Planning notes

The frame set (necessary installation
accessory)can be sent in advance to
the manufacturer of the stainless steel
or granite worktop for fitting.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
Minimum worktop depth 70 cm.
Air intake from above.
No intermediate shelf required.
Due to the separate frame welded
into the worktop, all parts remain fully
accessible.
Rear panel and wall trims must be
heat-resistant and consist of a non­flammable material.
The appliance can be fixed from above.
A minimum lateral clearance of at least
300 mm from adjacent heat-sensitive
furniture or contact surfaces must be
observed or thermal insulation fitted.
Cooktop clamping range: 40 - 50 mm.
With a total connected load of
more than 12 kW local regulations
concerning room ventilation, room
size and combination of extraction or
recirculation hoods must be observed.
Minimum clearance between gas
cooktop(s) with more than 12 kW and
ventilation hood 70 cm.
The combination with VL 430/431 is not
recommended, since the air extraction
from the centre burner cannot be
guaranteed due to the distance.
Appliance weight: approx. 35 kg.

Connection

Total connected load gas 18.0 kW.

Total connected load electric 15.0 W.
Connecting cable 1.4 m with plug.

CG492211
400 series gas cooktop

Stainless steel
Width 100.2 cm
Natural gas 20 mbar
Wok burner with 6 KW

created on 2017-03-16
Page 2