Fusion EN-FR6920, EN-FR6930, EN-FR6520, EN-FR4020, EN-FR5720 User Manual
...
ENCOUNTER
SPEAKERS
EN-FR4020, EN-FR52520, EN-FR6520, EN-FR6530
EN-FR4620, EN-FR5720, EN-FR6920, EN-FR6930
Speaker Parameters
EN-FR4020 EN-FR52520 EN-FR6520 EN-FR6530
Max Power Rating 120 Watts 140 Watts 180 Watts 200 Watts
RMS Power Rating 35 Watts 40 Watts 50 Watts 55 Watts
Frequency Response 75Hz - 20kHz 72Hz - 21kHz 63Hz - 21kHz 63Hz - 22kHz
Impedance 4 Ohms 4 Ohms 4 Ohms 4 Ohms
Sensitivity 86 dB 87 dB 87 dB 87 dB
Mounting Depth 47mm (1-5/8”) 50mm (2”) 60mm (2-3/8”) 60mm (2-3/8”)
Mounting Diameter 93mm
(3-11/16”)
120mm
(4-3/4”)
130mm
(5-1/8”)
130mm
(5-1/8”)
EN-FR4620 EN-FR5720 EN-FR6920 EN-FR6930
Max Power Rating 120 Watts 180 Watts 240 Watts 260 Watts
RMS Power Rating 35 Watts 50 Watts 70 Watts 75 Watts
Frequency Response 90Hz - 20kHz 52Hz - 21kHz 46Hz - 22kHz 47Hz - 22kHz
Impedance 4 Ohms 4 Ohms 4 Ohms 4 Ohms
Sensitivity 86 dB 86 dB 88 dB 88 dB
Mounting Depth 49mm
(1-15/16”)
Mounting Diameter 140mm (5-1/2”)
x 87mm (37/16”)
Installation Guidelines
1) Ensure there is adequate clearance and depth for the speaker to be mounted
2) Use the supplied template to mark out and cut the correct diameter hole
3) Drill four holes for the mounting screws
4) Separate the grille from the frame
5) Insert the speaker and grille frame and affix with the screws provided
6) Complete installation by replacing the grille into the grille frame
59mm
(2-5/16”)
180mm (7-1/16) x
128mm
(5-1/16”)
76mm
(2-31/32”)
233mm
(9-3/16”) x
153mm (6”)
76mm
(2-31/32”)
233mm
(9-3/16”) x
153mm (6”)
(see diagram on reverse side)
Warning: Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the voice
coil and void your warranty.
Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber grommets
when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and
from each other as failure to do so could result in
permanent damage to the audio system.
When connecting the source unit/amplifier and speakers ensure you connect the positive and negative output wire
from the source unit/amplifier to the corresponding speaker terminals. This will ensure the audio system will be in
phase.
For further product and installation information please visit www.fusionelectronics.com
Para obtener más información sobre los productos o su instalación, visite www.fusionelectronics.com
Weitere Informationen zum Produkt und zur Installation finden Sie auf folgender Website: www.fusionelectronics.com
Ga naar www.fusionelectronics.com voor meer product- en montage-informatie
Pour plus de renseignements sur les produits et l’installation, veuillez consulter www.fusionelectronics.com
Per ulteriori informazioni su prodotto e installazione, potete visitare www.fusionelectronics.com
За дополнительной информацией о продукции и установке обращайтесь на www.fusionelectronics.com
RECORD YOUR PURCHASE DETAILS HERE:
MODEL NUMBER __________________________ DATE OF PURCHASE__________________________
AFFIX RECEIPT HERE
WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may
cause permanent hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE!
V 4.0
Loading...