Furuno TZT2BB Installation Manual

Accessing the Secondary

Display on a Single Monitor

TZT2BB Installation

Accessing and Operating the Secondary

Display Output on a Single Monitor

TZT2BB Installation

Take full advantage of both video outputs when using only a single monitor TZT2BB installation.

Examples of why this installation may be useful:

1. Assist with performing software updates when having only one display connected

2. Use of two different radars or sounders on one monitor

3. Allows for “Quarter” page weather

4. Up to five panels of data possible (fit more information on screen)

5. Look at two composite video signals at once (normally only one composite allowed per display)

ample of dual range with one radar and single range of second radar on same display

Ex

Exam

ple of secondary video (as three-way screen) displaying in quarter selection of primary display

Items need for this install configuration:

1. USB A to Micro B cable

2. HDMI cable

Very short cables are best suited for this purpose to reduce signal loss and prevent induction of
noise.