TEU001
Remote Touch Encoder User Guide
RotoKey™
LCD Touchscreen
Two-Finger Tap Function
TZtouch2 and TZtouch3 operation is accomplished by utilizing these 3
controls: RotoKey™, LCD Touchscreen, and Two-Finger Tap Button.
Two-Finger
Tap Function
Edge-swipe Up Edge-swipe Down Edge-swipe Left Edge-swipe Right
Tips: To automatically close menus faster, set the “User Interface Auto Hide” in the General
menu from the default of 10 seconds to 5 seconds, or even 3 seconds. In the General menu,
set one of the “Two-Finger Tap Functions” to “Gain Control.” This is a quick way to access the
manual gain controls of the Fish Finder, DFF3D, and Radar.
Two-Finger
Long Tap Function
Screen Tap Cursor/
Chart Panning
Rotate/Zoom In & Out/
Menu Selection/List Scrolling
1. Cursor
Touch and move your
nger around for cursor
operation. Move cursor
to desired location on
screen, then tap the
screen to enter a point,
select an object, etc.
3. Screen Tap
Tap is the same as the
enter button. When
an object, menu item
or display item is
highlighted, tap on the
screen to select it.
Also, tap on the screen
to cycle through menu
items when multiple
selections are displayed,
such as chart types in
the highlighted area.
2. Chart Panning
To pan the chart, press
on the LCD screen for 1
second, and while pressing,
move your nger in the
direction you wish the chart
to move.
Or, move the cursor to any
edge of the screen to pan
the chart in that direction
using the “Auto Scroll”
feature in the General menu.
4. RotoKey™
Rotate the RotoKey™ to
Zoom In/Out, highlight
menu items, Quick Page
display selection, Gain
adjust, etc.
Page 1 of 2
5. Two-Finger Tap Function 6. Two-Finger Long Tap Function
A Short press on the
dedicated button on
the bottom of the TEU
is the same function as
the short, “Two-Finger
Tap” function.
7. Edge-swipe Up
Edge-swipe up from the
outer ring to bring up
the slide up menus for
each display such as
Chart Plotter, Radar, Fish
Finder, etc. To close,
click outside the menu
or wait for the menu to
close automatically.
A Long press on the
dedicated button on
the bottom of the TEU
is the same function as
the long, “Two-Finger
Tap” function.
8. Edge-swipe Down
Edge-swipe down from
the outer ring to open
the Quick Page menu.
Use the RotoKey™ to
highlight the desired
Quick Page, then tap on
the LCD screen to select
the highlighted display.
9. Edge-swipe Left 10. Edge-swipe Right
Edge-swipe left from
the outer ring to bring
out the right Slide-out
menu. To close, simply
edge-swipe left again
or wait for the menu to
close automatically.
Page 2 of 2
Edge-swipe right from
the outer ring to bring
out the Data Box menu.
To close, edge-swipe
right again.
Loading...