Perfect for inboard or outboard power boats and sail
boats
▲
Simple one-touch mode selection enables exible
steering and course control
▲
Autopilot control available from NavNet
TZtouch2/TZtouch
▲
Optional revolutionary SAFE HELM and POWER
ASSIST brings unrivaled steering control and comfort
at the helm**
FURUNO NAVpilot is a revolutionary autopilot designed for a variety of vessels. It utilizes a self-learning and adaptive software
algorithm, and plays the ultimate role in course keeping capability dynamically adjusting essential parameters for navigation
i.e., vessel speed, trim, draught, tide and wind effects, dead band, weather, etc. These parameters are stored in the system
memory and continuously optimized.
Graphic displays for NAVpilot-711C
Several types of the graphic displays are available, allowing you to customize the data to suit your own preferences with either
digital or analog graphics. The NAVpilot-711C features a color day/night graphic display, giving you much better sunlight viewability
during the day, while not affecting your night vision when the sun goes down.
NEW
* Based on Furuno testing and "Scenarios for a Clean Energy Future 2000” - U.S.
Department of Energy (www.ornl.gov/sci/eere/cef)
** Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
NAVpilot’s remarkable self-learning, adaptive software is
developed by collaborative works between FURUNO and FLSI.
Self-leaning and adaptive software
From the rst dock-side setup through the last voyage you made, NAVpilot continues to learn your vessel's steering characteristics.
This allows dynamic adjustments to the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc.
These characteristics are stored in the processor's memory where they are continuously optimized to make the NAVpilot more
versatile.
Auto mode
NAVpilot consistently maintains the desired heading, but the
vessel may drift off course due to the effects of tide and wind.
Tide and WindTide and WindTide and Wind
Advanced auto mode
NAVpilot consistently maintains the desired heading while
compensating for the effects of tide and wind.
Tide and WindTide and Wind
SABIKI mode
NAVpilot consistently maintains the desired heading astern
while compensating for the effects of tide and wind. Speed is
limited to 5 knots.
Tide and Wind
NEW
Night Version
Auto modeHighway
CompassSABIKIHighway
RudderWindEngine Speed
NAV mode / Route tracking
NAVpilot steers the vessel towards the current waypoint while
compensating for the effects of tide and wind.
When connected to a GPS Navigator, NAVpilot steers the vessel
to follow a series of waypoints in succession.
Upon arriving at each waypoint or destination, audible and visual alerts are activated.
Wind mode*
NAVpilot consistently maintains the desired heading toward true or apparent wind
direction while compensating for the effects of tide and wind.
* This mode is available for sailing craft only. Wind data input is required.
Tide and WindTide and WindTide and Wind
Waypoint
Tide and Wind
Waypoint
Tide and Wind
WaypointWaypoint
Wind
(True or apparent)
R
Waypoint
Tide and Wind
Wind
(True or apparent)
R
Page 3
FishHunter
The NAVpilot will activate the FishHunterTM to perform square, zigzag, circle, orbit, spiral or gure eight maneuvers around the
specied target at a user selected distance. This feature can also be used for Man Overboard (MOB).
TM
SquareZigzag
Waypoint
Waypoint
OrbitFigure 8Spiral
Waypoint
L
SABIKI mode for NAVpilot-711C
With the brand new SABIKI mode your NAVpilot-711C has
With the brand new SABIKI mode your NAVpilot-711C has
just become even more capable than before. And the best
just become even more capable than before. And the best
thing, there is no need to install additional hardware or
thing, there is no need to install additional hardware or
sensors. Just perform the automated software upgrade
sensors. Just perform the automated software upgrade
and the SABIKI mode will be added to your NAVpilot-711C.
and the SABIKI mode will be added to your NAVpilot-711C.
SABIKI mode is only available on vessels with outboard
SABIKI mode is only available on vessels with outboard
engines.
engines.
NEW
Sabiki “ON”Sabiki “OFF”
SABIKI mode lets the autopilot control while you are drifting
SABIKI mode lets the autopilot control while you are drifting
astern, so you can focus on shing instead of steering.
astern, so you can focus on shing instead of steering.
Moving astern at a slow pace the SABIKI mode is uniquely
Moving astern at a slow pace the SABIKI mode is uniquely
trailored for sabiki shing, jigging and bottom shing. Sabiki
trailored for sabiki shing, jigging and bottom shing. Sabiki
shing requires a bit of technique and no matter if you just
shing requires a bit of technique and no matter if you just
started or have considerable experience, the SABIKI mode
started or have considerable experience, the SABIKI mode
will help you catch the bait sh needed for the big catch.
will help you catch the bait sh needed for the big catch.
Wind or CurrentWind or Current
With the SABIKI mode turned on,
With the SABIKI mode turned on,
the direction can be kept just by
the direction can be kept just by
adjusting the throttle.
adjusting the throttle.
NAVpilot-711C software version 1.02 and Processor unit FAP-7002 software
version 1.20 required for SABIKI mode.
In order to keep the same direction
In order to keep the same direction
it is not sufcient to just reverse the
it is not sufcient to just reverse the
engine and mode astern.
engine and mode astern.
The steering has to be constantly
The steering has to be constantly
adjusted to keep direction.
adjusted to keep direction.
SAFE HELM / POWER ASSIST
The optional SAFE HELM and POWER ASSIST features* provide a unique interface to the vessel's hydraulic
hand steering system, providing unrivaled comfort and control of the vessel's steering directly from any manual
helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your vessel's
autopilot.
* Required Options - HRP11 or HRP17 Pump and FPS8 Power Steering Module
SAFE HELM
The SAFE HELM temporarily switches the NAVpilot to manual steering for a specied time
interval, taking it out of an automatic steering mode (AUTO, NAV, etc.) After the time interval has
elapsed, SAFE HELM is deactivated and the previous automatic steering mode is restored.
POWER ASSIST
The POWER ASSIST is a unique helm-activated assisted steering feature that can augment and
possibly replace separate electric and power-robbing, engine-driven power steering systems on
many vessels. POWER ASSIST reduces steering system complexity and costs while increasing
economy.
Waypoint
L
Waypoint
L
After performing the software
After performing the software
upgrade, a SABIKI icon will appear
upgrade, a SABIKI icon will appear
in the turn menu. The SABIKI mode
in the turn menu. The SABIKI mode
is only user selectable if the current
is only user selectable if the current
speed is below 5 knots. Once
speed is below 5 knots. Once
SABIKI mode is selected, the
SABIKI mode is selected, the
course can be set with the Roto
course can be set with the Roto
knob and the arrow keys.
knob and the arrow keys.
Compatible with EVC engines
The NAVpilot-711C works with a wide variety of boats and engines, including power and sail boats, with inboard or outboard engines.
The NAVpilot-711C works with a wide variety of boats and engines, including power and sail boats, with inboard or outboard engines.
It even has the capability to work with Volvo Penta IPS, Yamaha Helm Master
It even has the capability to work with Volvo Penta IPS, Yamaha Helm Master
(Compatible with Volvo Penta IPS drive versions C, D or E type.)(Compatible with Yanmar 8LV and JC10)
FURUNO IF-700IPS (IPS
FURUNO IF-700IPS (IPS
Interface Unit) is an optional
Interface Unit) is an optional
unit to integrate with the
unit to integrate with the
innovative propulsion system.
innovative propulsion system.
The IPS Interface Unit relays
The IPS Interface Unit relays
command from NAVpilot-700
command from NAVpilot-700
series to the engines to steer
series to the engines to steer
the vessel.
the vessel.
Volvo Penta IPS system
NEW
FURUNO
NAVpilot-700 Series
TM
TM
and Yanmar 8LV engine systems.
and Yanmar 8LV engine systems.
Yamaha Helm Master™ systemYanmar Joystick Control System
Volvo Penta IPS engine
Yamaha engine
Yanmar 8LV engine
Furuno Fantum Feedback
FURUNO with Fantum FeedbackTM, NAVpilopt outboard/sterndrive
FURUNO with Fantum FeedbackTM, NAVpilopt outboard/sterndrive
installations no longer require use of a physical rudder feedback unit.
installations no longer require use of a physical rudder feedback unit.
Fantum Feedback
Fantum Feedback
simplied installation, while also delivering enhanced steering
simplied installation, while also delivering enhanced steering
control.
control.
This streamlined installation, combined with FURUNO’ s unique
This streamlined installation, combined with FURUNO’ s unique
adaptive learning Autopilot technology, provides unmatched
Feedback
NAVpilot-700 series software. This new software was developed
NAVpilot-700 series software. This new software was developed
and extensively tested on a wide variety of outboard/sterndrive
and extensively tested on a wide variety of outboard/sterndrive
vessels with hydraulic steering and reversing pump control. Fantum
vessels with hydraulic steering and reversing pump control. Fantum
Feedback
Feedback
speeds to high-speed cruising, utilizing a newly developed,
speeds to high-speed cruising, utilizing a newly developed,
time-based rudder gain process, rather than traditional rudder angle
time-based rudder gain process, rather than traditional rudder angle
based control.
based control.
TM
TM
TM
TM
TM
TM
NAVpilot software clears the path to a
NAVpilot software clears the path to a
is a menu-selectable feature available in the latest
is a menu-selectable feature available in the latest
achieves precise course control, from slow trolling
achieves precise course control, from slow trolling
TM
Page 4
Perfect match!
Furuno NAVpilot-711C is designed to match
the new NavNet TZtouch2, NavNet TZtouch
and new FI-70 Instrument/Data organizer and
other navigation equipment. The “Plug and Play”
CAN bus interface allows for easy installation
and exceptional interface ability.
The diagrams below show typical installations
for power and sail boats.
(Outboard/Sterndrive)
NAVpilot-700
Multi Function Display
NavNet TZtouch
NEW
NAVpilot-711C
Instrument/Data Organizer
FI-70
NEW
Autopilot control by NavNet TZtouch2/TZtouch
If you have your boat equipped with a
NavNet TZtouch2 or TZtouch system you
can take full advantage of the
NAVpilot-700/711C from the NavNet
TZtouch series display. You can activate
the AUTO mode of the NAVpilot-700/711C
and change the set course by tapping on
arrow buttons, by adjusting a slider bar
with your nger or the RotoKeyTM, or by
dragging the course arrow with your nger.
NavNet TZtouch2/TZtouch
SAIL BOATPOWER BOAT
Wind Transducer
FI-5001L
Instruments/
Data Organizer
Photo: Model TZT14
CAN bus (NMEA2000)
FI-70
NAVpilot-711C
Processor
FAP-7002
Analog NMEA Data Converter
IF-NMEAFI
Instrument/Data Organizer
FI-70
RRU
Pump
Multi Function Display
NavNet TZtouch2
Junction Box
FI-5002
Heading sensor
PG-700
NAVpilot-711C
Hydraulic pump
Processor unit
FAP-7002
Processor unit
FAP-7002
Junction Box
FI-5002
Hydraulic pump
Heading sensor
PG-700
Rudder Reference unit
FAP-6112-200
Heading sensor
NAVpilot cable
CAN bus (NMEA2000)
Others
PG-700
Junction Box
FI-5002
Processor unit
FAP-7002
Multi Function Display
NavNet TZtouch
Rudder Reference unit
FAP-6112-200
NAVpilot-700
NAVpilot-711C
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.