Basic Operation
1. To turn the unit On/Off
When the unit is Off, it may be switched On by pressing POWER button. When the
unit is On, short press POWER button to switch the unit Off.
2. To select function mode
Press MODE button repeatedly to select RADIO, USB (only available when a USB
storage is inserted), AUX IN, OPTICAL, TV, DVD or BT mode.
3. To adjust the volume
During playback, press VOLUME +/VOLUME - button to increase/decrease the
volume.
4. To mute or resume sound
During playback, press MUTE button to silent the unit, press again to resume the
sound immediately.
5. To select and adjust the mode of the sound and menu
Press SEL button repeatedly to select the mode of VOL, BAS, TRE(treble), BAL
(balance), SUB IN/SUB EXT, LOUD OFF/LOUD ON, EQ OFF/FLAT/ROCK/POP/CLASSIC, RPT OFF/RPT ONE/RPT DIR (in USB mode), RDM OFF/RDM ON (in USB
mode), DEVOL, DX/LOCAL (in RADIO mode), STEREO/MONO (in RADIO mode) in
the sequence and circulation.
Press VOLUME +/VOLUME - button to select your desired mode.
6. To select a preset EQ mode
Press EQ button repeatedly on the remote control to select the preset music
equalizer curves: EQ OFF, CLASSIC, POP, ROCK, FLAT. The sound effect will be
changed accordingly.
7. ZONE 1/2/3/4 Button
Press ZONE1/2/3/4 button will turn on or off the audio source in each of speak-
ers. The corresponding icon “ZONE 1 ” “ZONE 2”, “ZONE 3”, or “ZONE 4” will be
displayed on LCD once it is selected.
8. To reset the unit
If the display is incorrect, or the function buttons are not effective or the sound is
distorted. Switch the unit to AUX IN mode, press and hold MODE button for more
than 6 seconds to make the unit return to factory default settings and re-instate
the correct functions.
Operation
8