Furrion FRC12TA BLC, FRC12TA BLM User Manual

Furrion Digital Wireless Camera System

Designed for 5th Wheel, RV, Caravan and Trailer applications

Furrion’s new easy install wireless camera kit comes in two parts,

1. Furrion mount bracket prep kit. Part No.

2. Furrion Camera and Monitor Kit. Part No.

Check if your RV or Trailer has been pre installed with the mounting bracket
prep kit.

FRCBRKT-BL

FRC12TA-BL

Contents:

1. Safety Information

2. General Information

3. Installation instructions

4. Operation

5. Trouble shooting

1

6. Warranty

7. Technical Specification

Safety Instructions

Please Read these instructions carefully before installation and operating your
Furrion reversing camera unit.

2

The following symbols are used throughout this manual to indicate potentially
dangerous situations or mark important safety instructions.

WARNING: Indicates a potentially dangerous
condition. Use extreme caution when
performing this task.

CAUTION: Indicates a critical procedure for
safe and proper operation of the controller.

NOTE: Indicates a procedure or function that
is important for the safe and proper operation of
the controller.

General Safety Information

• Read all of the instructions and cautions in the manual
before beginning installation.

• There are no user serviceable parts inside the Furrion
Rear camera system Do not disassemble or attempt to
repair any part of the camera system.

• Disconnect all sources of power to the camera before
installing.

• There are no fuses or disconnects on the Furrion reversing
camera unit. Install external fuses/breakers as required.

• Do not allow water to enter the LCD Display.
Connect 12V power cable to the camera unit using waterproof

•
connectors.

Excessive heat can be caused from a loose connection.

Caution:
A battery or 12V DC electrical system presents a risk
of electrical shock or burn hazard. Ensure all power
sources are isolated before installation.

Warning:
These installation instructions are for the use by
qualified personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
specified in the operating instructions.

Caution:
To reduce the risk of fire, connect the camera only
to a circuit provided with a maximum branch-circuit
over current protection device.

3

Note:
Ensure to watertight connectors which connecting
camera power supply cable to power source.

Warning:
Use 16AWG or larger cables to supply power to
camera unit.

Warning:
Ensure to connect the rear camera to the correct
polarity 12V DC power supply. Red = Positive.

Installation Safety Precautions

Use correct size cable and connectors for suppling power
to your rear camera

4

Ensure the power supply circuit has circuit protection

Connect rear camera to a 12-14V DC circuit only

Use insulated tools when working with power supply

Use correct safety equipment when working at elevated levels

Ensure camera prep bracket gasket is correctly sealed and
weatherproof.

Ensure correct polarity of DC power supply to camera