Furrion Frcbrkt-bl, FOS48TAPK-BL User Manual
Digital Wireless Observation System
Operating and Installation
Instructions
This manual is for use with
Furrion FOS48TAPK-BL
Digital Wireless Observation System
Furrion FRCBRKT-BL
Digital Wireless Observation System
With FRCBRKT-BL Mounting Bracket pre-installed.
Welcome
Furrion FOS48TAPK-BL Digital Wireless Observation System
Includes FRCBRKT-BL Mounting Bracket
Furrion FRCBRKT-BL Digital Wireless Observation System
For vehicles with FRCBRKT-BL Mounting Bracket pre-installed.
Thank you for purchasing a Furrion Digital Wireless Observation System.
Furrion’s digital wireless observation system is one of the easiest rear view camera
systems to install in your trailer, truck or RV. All that is required is a connection of a
single DC power supply to the rear camera from a running light power source.
The Furrion digital wireless observation system uses digital wireless technology
giving the major benet of superior signal transmission with low interference on
a single bandwidth channel. This means the Furrion camera unit eliminates the
interferences which other analogue signal systems are subject to, meaning the
Furrion digital system gives you a clearer picture of what is behind you no matter
where you are.
This Furrion system with integrated antenna attached to the camera has been
specically designed for use on trailers, trucks, 5th wheels, caravans and RV’s.
This system has been designed for extended range applications or security
monitoring.
Before installation and use, please read all instructions carefully. This will ensure
safe use and reduce the risk of injury to persons.
2
Contents
IMPORTANT SAFETY INSTRUCTIONS.................................................................4
System Parts............................................................................................................5
Installation Mounting Bracket...................................................................................6-7
Installation Camera Wiring..........................................................................................7
Installation Mounting Bracket cont..............................................................................8
Camera Installation..................................................................................................9
Camera Positioning...............................................................................................10
Monitor Installation................................................................................................11
Pairing..............................................................................................................12
Picture Control.......................................................................................................13
Trouble Shooting....................................................................................................14
Specications....................................................................................................15
3
IMPORTANT SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLING OR USING THE SYSTEM
Electrical Safety
A battery or 12 or 24V DC electrical-
system presents a risk of electrical
shock or burn hazard. Ensure all power
sources are isolated before installation.
Insulate unconnected wires with vinyl
tape or similar.
Use insulated tools when working
with a power supply.
Caution
There are no user serviceable parts
in the Furrion Digital Wireless Observation System. Do not disassemble or
attempt any repairs.
There are no fuses or disconnects
in the Furrion Digital Wireless Observation System. Install external fuses/
breakers as required.
Care
Do not wash the vehicle with an
automatic car wash or high pressure
water. This may damage the camera.
bre cloth, do not use course or abrassive materials.
Do not use alcohol or amonia based
products to clean the LCD screen.
Only use specialist screen cleaning
products.
Use a wet cloth to clean the cam-
era lens. A dry cloth may scratch the
camera lens.
-
Installation
Installation & wiring of this product
require specialist skill. To ensure proper installation and to ensure safety,
please seek a specialist technician.
Only use parts supplied or recom-
mended.
Use watertight connectors for
camera power supply cable to power
source.
Use 16AWG or larger cables to sup-
ply power to the camera unit.
Connect rear the camera to a 8-
30V DC circuit only.
Ensure correct polarity of DC power
supply to the camera
camera only to a circuit provided with
a maximum branch-circuit over current
protection device.
Don’t route wiring in areas that may
get hot.
Take necessary precautions when
working at elevated levels.
4
FOS48TAPK-BL
Digital Wireless
Observation System
LCD Monitor Monitor Stand
System Parts
Camera
Camera Bracket
Camera Bracket
Gasket
Monitor Power Cable
FRCBRKT-BL
Digital Wireless
Observation System
Camera Power
Cable
5
Loading...