WARNING :TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
Please use a screen saver to prevent burning of an after-image on the screen.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
In order not to defeat the safeguards incorporated into this unit, observe the following basic rules governing its installation,
use and service. Please read these "Important Safeguards" carefully before use.
Read all the safety and operating instructions before operating the unit.
Retain the safety and operating instructions for future reference.
Adhere to all warnings on the unit and in the operating instructions.
Follow all operating instructions.
Unplug the unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the manufacturer as they may be hazardous.
Do not use the unit near water. Do not use the unit immediately after moving it from a low temperature to a high
temperature environment, as this causes condensation, which may result in fire, electric shock, or other hazards.
Do not place the unit on an unstable cart, stand, or table. The unit may fall, causing serious injury to a child or adult, and
serious damage to the unit. Mount the unit according to the manufacturer's instructions, using the mount recommended by
the manufacturer.
When the unit is used on a cart, avoid quick stops, excessive force, and uneven
surfaces which may cause the unit and cart to overturn, damaging the unit or
causing possible injury to the operator.
When transporting by car, place the unit as shown in the figure.
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation and protect the unit from
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the unit
on a bed, sofa, rug, or similar surface. The unit should not be placed in a built - in installation such as a bookcase or rack
unless proper ventilation is provided and the manufacturer's instructions are adhered to.) For proper ventilation, separate
the unit from other equipment, which may obstruct ventilation. Keep the unit at least 10cm from other equipment.
Operate only with the type of power source indicated on the label. If you are not sure of the type of power supply to your
home, consult your dealer or local power company.
This unit is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you cannot insert the plug
into the outlet, have an electrician install the proper outlet. Do not defeat the safety purpose of the grounded plug.
Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay
particular attention to cords at doors, plugs, receptacles, and where they exit from the unit.
For added protection during a lightning storm, or when the unit is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the cabling. This will prevent damage to the unit by lighting and power line
surges.
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in fire or
electric shock.
Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-circuit
parts that could result in a fire or electric shock. Never spill liquid of any kind onto the unit.
- 2 -
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages and
other hazards. Have all service done by qualified service personnel.
Unplug this unit from the wall outlet and have it serviced by qualified service personnel in the following cases:
a) If the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen onto the unit.
c) If the unit has been exposed to rain or water.
d) If the unit does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the Operation Manual, as improper adjustment of controls may result in damage and will often require
extensive work by a qualified technician to restore the unit to normal operation.
e) If the unit has been dropped or damaged in any way.
f) A distinct change in performance indicates that service is required.
When required, be sure the service technician uses replacement parts specified by the manufacturer or parts with the
same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service of repairs, ask the service technician to perform safety checks to determine that the
unit is in proper operating condition.
Place the unit more than one foot away from heat sources such as radiators, heat registers, stoves, and other devices
(including amplifiers) that produce heat.
When connecting other devices such as VCR's and personal computers, turn off the power to this unit to protect
against electric shock.
Do not place combustibles such as cloth, paper, matches, aerosol cans or gas lighters that prevent special hazards
when overheated behind the cooling fan.
Use only the accessory cord designed for this unit to prevent shock.
The power supply voltage rating of this unit is AC100-240V, but the attached power cord conforms to the following
power supply voltage. Use only the Power Cord designated by our dealer to ensure Safety and EMC.
When used with other power supply voltages, the power cable must be changed.
Consult your local dealer.
Power Cord
Power supply voltage : AC 100 - 125 VAC 200 - 240 VAC-240V
(SAA TYPE)
- 3 -
SPECIFICATIONS
Power requirement
110-240V, 50/60Hz (W, E Type)
Current drain
7.9A-3.0A (W, E Type)
Display panel
Screen size139.3 (W) x 78.3 (H) [cm]
54.8 (W) x 30.8 (H) [inch]
Aspect ratio16 : 9
Number of pixels1,366 (H) x 768 (V) pixels
Pixel pitch1.02mm x 1.02mm
Contrast ratio2500: 1
Luminance950 cd/m
2
Viewing angleMax. 160 degrees
Input Terminals
Video input
(E model:option)
S video input
(E model:option)
RCA terminal
P-P /75Ω
1.0V
S terminal
Y signal:1.0V
P-P /75Ω
C signal:0.286VP-P /75Ω
ComponentThree RCA terminals
(one system)video input
Y : 1.0V
P-P /75Ω
Pb /B-Y: 0.7VP-P /75Ω
Pr /R-Y: 0.7VP-P /75Ω
Video input
SCART terminal
(only E model:option)
Video
S video
/75Ω
1.0V
P-P
Y signal:1.0VP-P /75Ω
C signal:0.286VP-P /75Ω
RGB
G : 0.7VP-P /75Ω
B : 0.7VP-P /75Ω
R : 0.7VP-P /75Ω
Digital RGB 1 input
DVI-D terminal (HDCP)
Differential Input 0.5V 10%
++++
(RXC , RX0 , RX1 , RX2 )
Analog RGB 2 inputmD-sub:15pin (3 row type)
Video : 0.7V
P-P /75Ω
SYNC signal : TTL level
Analog RGB 3 inputBNC terminal x 5
(only E model)
G: 0.7V
B: 0.7V
R: 0.7V
P-P/75Ω
P-P/75Ω
P-P/75Ω
H: TTL level or 0.3V
V: TTL level or 0.3V
P-P /75Ω
P-P /75Ω
User set mode8 memories (each RGB1,2,3)
Display frequencyHorizontal :15.63 to 80.0MHz
Vertical : 50.0 to 120Hz
Dot clock:50MHz Max
XGA 68MHz
RS-232CD-sub 9 pin terminal
Color system
NTSC/PAL/SECAM/N-PAL/M-PAL
/4.43NTSC/PAL60
Analog audio inputTwo RCA terminals(one system)
Effective max.
500mVrms/22k
Level terminal 10W+10W (L/R), 6
Ω
Ω
output
Display colors
1.07 billion (1,024 each for R.G.B.)
Outer dimensionsWidth : 150.6cm (59.3 inch)
Height: 89.6cm (35.3 inch)
Depth : 12.3 cm (4.8 inch)
Net weight72.0kg (159lbs)
Environment (Operating)
Temperature0 to 40 C
Relative humidity20 to 80%
Pressure850 to 1,114 hPa
AccessoriesUser's manual
Power cord
Small ferrite core (2)
Big ferrite core (2)
Remote controller
Batteries (Type AA x 2)
This display can store parameter settings for eight additional signals for RGB.
To do this, select the desired signal and follow "RGB MODE ADJUSTMENT" in the manual to adjust the parameters.
When you finish, the settings will be automatically stored.
FACTORY SET SIGNALS (RGB MODE)
Main corresponding signals (RGB mode)
Display (dots x lines)
640 x 48031.4759.94VGA
640 x 480
640 x 480
720 x 400
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1280 x 102463.9860.02SXGA 60 Hz
1280 x 102479.9875.03SXGA 75 Hz
1600 x 120075.0060.00
1600 x 1200
848 x 48031.0260.00
852 x 48031.72
1360 x 768
720 x 48515.7359.9460 fields
720 x 57515.6350.0050 fields
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
Horizontal frequency (kHz)Vertical frequency (Hz)
37.5075.00
43.2785.01
31.4770.09
37.8860.32
46.8875.00SVGA 75 Hz
53.6785.06SVGA 85 Hz
48.3660.00XGA 60 Hz
60.02
68.68
106.2585.00UXGA 85 Hz
47.71
75.03
84.99
59.97
60.01
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
XGA 75 Hz
XGA 85 Hz
UXGA 60 Hz
SignalDVI-D
- 5 -
FACTORY SET SIGNALS (Component video mode)
Horizontal
frequency (kHz)
15.73 SDTV 480i
15.63 SDTV 576i
31.47 SDTV 480p
31.25 SDTV 576p
45.00 HDTV 720p
37.50 HDTV 720p
33.75 HDTV 1,080i
28.13 HDTV 1,080i
The dedicated graphics card is optional.
In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and
interpolation. Also note that on-screen information is also displayed in reduced size.
" Out of range" appears if the display receives a signal whose characteristic does not fall within the display's
permissible range.
You can check the input signals with "Information" on the OTHERS Menu screen.
Vertical
frequency (Hz)
59.94
50.00
59.94
50.00
60.00
50.00
60.00
50.00
Signal
FACTORY SET SIGNALS (Video, S-video mode)
Horizontal
frequency (kHz)
15.73 NTSC
15.63 PAL
15.63 SECAM
15.63 PAL 60
15.63 N-PAL
15.73 M-PAL
15.73 4.43 NTSC
Vertical
frequency (Hz)
59.94
50.00
50.00
59.52
50.00
59.95
59.94
RGB INPUT TERMINAL
Pin No.Input signalPin No.Input signal
1Red9
2Green10Ground
3Blue11
∗ The sync switch (TTL/ANALOG switch) is on
the rear of the 13-pin horizontal sync and
14-pin vertical sync terminals.
4
5Ground13Horiz. sync
6Ground14Vert. sync
7Ground15
8Ground
12
Outer side
Ground
Signal
RS-232C INPUT TERMINAL
Pin No.
DVI-D INPUT TERMINAL
Pin No.No. signal
1DCD (Data Carrier Detect)
2RD (Receive Data)
3TD (Transmit Data)
4DTR (Data Terminal Ready)
5GND (Ground)
6DSR (Data Set Ready)
7RTS (Request To Send)
8CTS (Clear To Send)
9RI (Ring Indication)
- 6 -
SCART TERMINAL
48121620
26101418
37111519
Pin No.
1
2Right audio
3
4
5Blue ground
159131721
6Left audio
7Blue
Input Signal
Audio ground
Pin No.
8
9
10
11Green
12
13Red ground
14
Input Signal
Green ground
Pin No.
15
16
17
18
19
20
21Ground
Input Signal
Red/chrominance
Composite video ground
Composite video/Y
- 7 -
CONNECTION
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
Display
Speaker (optional)
Remote
control
VCR
DVD player
Satellite tuner
PC
- 8 -
Model : P63XHA30W
VCR
Connect the video signal cable to either the S-video input terminal or the video input terminal.
To video output
To S-video output
To audio outputs
To S-video input
To audio inputs
To video input
Bottom of Display
- 9 -
DVD PLAYER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
If the component to be connected is equipped with component video output terminal, it is recommended to connect to the
component video terminal.
To component video output
To video output
To S-video output
To audio outputs
To video input
To S-video input
To audio
inputs
To component
video input
Bottom of Display
SATELLITE TUNER
Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
If the component to be connected is equipped with component video output terminal, it is recommended to connect to the
component video terminal.
To component video output
To video output
To S-video output
To audio outputs
To video input
To S-video input
To audio
inputs
To component
video input
Bottom of Display
- 10 -
PC
As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
The PC can be connected to either the front side or the rear side, whichever is most convenient.