Fujitsu ScanZen Eco Series Installation Manual

Page 1
ScanZen Installation Guide
How to Set up ScanZen
Here’s an easy to follow guide to get you quickly set up with your ScanZen Eko series scanner.
1. Checking the Components
2. Removing the Protective Packaging
3. System Requirements
4. Installing the Driver
6. Installing the Software
7. Scan Test
1
Page 2
1. Checking the Components
Make sure that all items shown below are included in the package.
Scanner
Paper Chute
AC Outlet
AC Adapter
2
Page 3
1. Download & Install Drivers
2. Plug in your scanner
Installation instructions, users guides, software and warranty registration are all available online.
3. Select Application
4. Scan & Achieve Zen!
©
Please plant this seeded postcard
to grow a garden of flowers and
give back to the Earth!
Ph: 844-686-8448
*CG00002-297201*
Email: teamjoi@scanzen.com Website: www.scanzen.com
©
USB Cable
Welcome to ScanZen Card
2. Removing the Protective Packaging
Follow the procedure below to carefully remove the protective packaging before using the scanner.
1
Remove the protective packaging and tape.
3
Page 4
2
Remove the protective packaging and tape.
3
4
Remove the protective packaging and tape.
Attach the ADF paper chute.
4
Page 5
3. System Requirements
Make sure that your computer satisfies the following system requirements.
Hardware
Recommendations
CPU Intel® Core i5 2.5 GHz or higher,
except for mobile
Memory
Hard disk drive
Display
4 GB or more
7200 rpm or faster
1024 x 768 pixels or more
Operating System
l
Windows® 10 (32-bit/64-bit)
l
Windows® 8.1 (32-bit/64-bit)
Windows® 7 (32-bit/64-bit)
l
Requirements
Intel® Pentium® 4 1.8 GHz
1 GB
5400 rpm
5
Page 6
4. Installing the Driver
Follow the steps below to install the driver for ScanZen onto your computer.
If you have an administrator on a shared network, be sure you log into Windows® as a
1
user with administrator privileges.
2
Download the following file onto your hard drive.
PaperStream IP (TWAIN) for ScanZen 1.54.0.xxxx
PSIPTWAIN-SZ-1_54_0c.exe (xx,xxx,xxx Bytes)
3
Quit any other applications that are running on your computer.
Run the file that you downloaded in step 2. This creates a folder named “Disk1” in
4
the same folder where the program is stored. Installation starts automatically after self-extraction. If it doesn’t start, double-click “Setup.exe” which is located in the Disk1 folder.
Follow the instructions from the Installation Wizard to complete the installation.
5
6
Page 7
Connect the cables in the following order.
ON
Hold for at least 2 seconds
7
Page 8
6. Installing the Software
Follow the steps below to install the software.
The following software can be installed:
l
PaperStream Capture Lite
l
Presto! PageManager
ABBYY FineReader Sprint
l
1
Read the end-user license agreement shown below and select the [I agree to the terms and conditions above] checkbox.
END-USER LICENSE AGREEMENT
This End-User License Agreement (“EULA”) is a legal agreement between the user of this software (“You”) and PFU Limited (“PFU”) for governing the use of the PFU software to be used with PFU fi Series scanner product (“Product”). The PFU software includes the Software download tool(“Software”).
I agree to the terms and conditions above. (Necessary)
Be sure you log into Windows® as a user with administrator privileges.2
Download the following file onto your hard drive.3
Software Download Tool 1.0.11
SoftwareDownloadTool.exe (17.5 MB)
When the file download is completed, run the file.4
Follow the instructions on the window.5
8
Page 9
7. Scan Test
Using PaperStream Capture Lite and PaperStream IP (TWAIN) driver, scan a document with the following procedure to see if a scan can be performed properly.
1 2
Place paper upside down and face down.
3
PaperStream Capture Lite
Lite
PaperStream
Capture Lite
9
Page 10
4 5
10
Loading...