SCA.1, SCA. 2 INTERFACE CONNECTOR
240 SERIES (SCA)
■ FEATURES
• Half pitch connector conformed to SCA system (80
pins).
• Add mating guide and ESD protection to do plug-in
safety and reliability (They are newly added on SCA.
2CN).
• Hot-plugging. Ground contacts mate first before other
contacts mate when engagement is done (conforms to
SCA.2 specification).
• To prevent pin-bending, bellows contacts are used.
• Plug: 2 types are available.
1) The center of a SMT plug mates the center of a PCB.
2) 0.9 mm (0.035 in.) off-set from center
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstand voltage
Specifications
–55°C to +105°C
DC 1 A
AC 240 V
40 mΩ max. (DC 6 V, 0.1 A)
1000 MΩ min. (DC 500 V)
AC 750 V for 1 minute
)
■ MATERIALS■ SPECIFICATIONS
Insulator
Conductor
Plating
Item
Materials
Polyester (UL94V-0)
Copper alloy
Contact
Terminal
Gold plating
Palladium plating
1
PLUG, SMT [0.9 mm (0.035 in.) OFFSET]
240 Series (SCA.1)
■ DIMENSIONS
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
#40
1.27
±0.05
±0.001
(0.050
)
#80
R 1.6 (0.062)
49.53 (1.950)
52.00 (2.047)
1.27 (0.050)
Unit: mm (in.)
PLUG, SMT (STRADDLE MOUNT)
■ DIMENSIONS
#1
#41
1.0 (0.039)
10.0
R 0.635 (0.025)
1.27 (0.050)
7.0 (0.275)
0.9 (0.035)
4.0 (0.157)
(0.393)
12.0 (0.472)
12.70 (0.500)
■ PC BOARD MOUNTING PATTERN
±0.1
±0.004
±0.001
(0.145)
±0.05
3.70
)
(0.059
(0.029
1.52
0.76
)
24.765 (0.975)
±0.05
±0.001
49.53
57.92
±0.05
(1.950
(2.280
)
±0.05
±0.001
(0.050
)
1.52
1.27
±0.001
)
Recommended PCB Thickness 1.0 ± 0.1 mm
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/CS
±0.05
±0.001
(0.059
)
±0.004
(0.137
±0.1
3.50
)
±0.004
(0.059
±0.1
1.52
)
±0.004
(0.145
±0.1
3.70
)
R
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
#40
#80
1.27
±0.05
±0.001
(0.050
)
#1
#41
1.0 (0.039)
10.0
R 0.635 (0.025)
1.27 (0.050)
R 1.6 (0.062)
49.53 (1.950)
52.00 (2.047)
1.27 (0.050)
■ PC BOARD MOUNTING PATTERN
±0.1
±0.004
)
(0.145)
3.70
±0.001
(0.059
±0.05
1.52
(0.029
0.76
24.765 (0.975)
±0.05
±0.001
)
Recommended PCB Thickness 1.0 ± 0.1 mm
49.53
57.92
(1.950
)
±0.05
±0.001
1.27
±0.05
±0.001
(2.280
(0.050
)
±0.05
±0.001
1.52
)
(0.059
)
R
)
)
)
±0.004
±0.004
±0.004
(0.137
(0.059
(0.145
±0.1
±0.1
±0.1
3.50
1.52
3.70
Unit: mm (in.)
7.0 (0.275)
0.9 (0.035)
4.0 (0.157)
(0.393)
12.0 (0.472)
12.70 (0.500)
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/BS
Specifications
subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
2
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
62.15 (2.446)
55.07 (2.168)
#1
49.53 (1.950)
#40
7.10
240 Series (SCA.1)
(0.279)
Housing
Hold on bar
#41
0.30
(0.011)
■ PC BOARD LAYOUT
1.905 (0.075)
0.952 (0.037)
58.51 (2.031)
)
±0.004
(0.086
±0.1
#1
2.20
#80
9.85
6.59
(0.255)
(0.387)
2.90
0.50
(0.019)
2.69
(0.105)
0.30
(0.011)
(0.114)
Unit: mm (in.)
59.51 (2.031)
#2
#39
#40
■ PART NUMBER
FCN-244B080-G/AS
Specifications
subject to change
2.60
(0.102
±0.1
±0.004
#42
±0.1
2.70
±0.004
(0.106
)
±0.004
)
)
0.80
(0.031
±0.1
±0.004
)
#79
#80
2.60
(0.102
±0.1
±0.004
#41
(0.102
±0.1
2.60
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
)
Unit: mm (in.)
3
PLUG, SMT (STRADDLE MOUNT), 20 PIN
■ DIMENSIONS
27.38 (1.078)
23.03 (0.907)
19.77 (0.778)
11.43 (0.45)
#10
1.27(0.05)
#1
5.0 (0.197)
110
7.0 (0.276)
240 Series (GBIC)
20
#20
A
1.0(0.004)
0.50 (0.019)
A
1.27(0.05)
0.635(0.025)
R 1.60(0.629)
9.25(0.364)13.12(0.517)
26.24 (1.033)
■ PC BOARD LAYOUT
0.81±0.03
0.05 S W
2 PLC
0.81±0.03
0.05 S W
TYP
(0.032
(0.032
FT
#11
R 0.635 (0.025)
1.27(0.05)
±0.001
)
±0.001
)
6.72(0.264)
3.55(0.149)
1.0(0.004)
Retention leg
23.06 (0.908)
1.27(0.05)
1.37
(0.908
±0.05
±0.002
1.52(0.060)
)
12.70(0.5)
Unit: mm (in.)
)
±0.016
■ PART NUMBER
FCN-248Q020-L/ES
Specifications
subject to change
(0.060) 0.05 S W
1.52
TYP
)
±0.001
(0.032
0.81±0.03
0.05 S W
2.33(0.092)
1.31(0.052)
TYP
TYP
1.52(0.060)
TYP
19.87
4.22(0.166)
±0.2
(0.782
±0.008
)
Recommended PCB Thickness 1.0 ± 0.1 mm
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
R 0.7
(0.028)
2.53(0.099)
3.19(0.126)
3.50(0.138)
0.28(0.011)
(0.102
±0.4
2.60
V
Unit: mm (in.)
4
PLUG, SMT [0.9 mm (0.035 in.) OFFSET] SCA.2
240 Series (SCA.2)
■ DIMENSIONS
#40
#80
R 1.6 (0.062)
P/N FCN-248Q080-L/DS has
66.50 (2.618)
52.15 (2.446)
58.00 (2.283)
49.53 (1.950)
discontinued
49.53 (1.950)
52.00 (2.047)
58.87 (2.278)
65.36 (2.573)
1.27
±0.05
(0.050
1.27 (0.050)
±0.001
)
#1
7.0 (0.275)
0.9 (0.035)
#41
4.0
(0.157)
1.0
(0.039)
10.0
(0.393)
12.0 (0.472)
R 0.635 (0.025)
1.27 (0.050)
■ PC BOARD LAYOUT
±0.1
±0.004
61.67
(2.427
)
±0.1
±0.004
49.53
(1.950
)
)
±0.001
±0.001
±0.05
±0.001
(0.031
(0. 059
±0.05
1.52
(0. 059
±0.05
1.52
0.81
0.81
)
±0.05
±0.001
(0.031
)
58.17
Recommended PCB Thickness 1.0 ± 0.1 mm
)
±0.5
1.27
(0.050
±0.1
±0.004
(2.290
)
4.22
(0.166
12.70 (0.500)
been
1.37
(0.053
R
±0.001
)
±0.05
±0.001
)
Unit: mm (in.)
.93 (0.036)
±0.5
±0.001
)
3.70
(0.145
6.72
3.65
±0.004
±0.1
±0.5
±0.001
(0.264)
(0.139)
)
±0.004
(0. 137
±0.1
3.50
)
)
(0.059
1.52
Unit: mm (in.)
■ PART NUMBER
)
)
±0.004
±0.004
(0.011
(0.118
±0.1
±0.1
0.28
3.00
FCN-248Q080-L/DS
PLUG, SMT (STRADDLE MOUNT) SCA.2
■ DIMENSIONS
66.50 (2.618)
52.15 (2.446)
58.00 (2.283)
#40
#80
R 1.6 (0.062)
49.53 (1.950)
49.53 (1.950)
52.00 (2.047)
58.87 (2.278)
65.36 (2.573)
1.27
±0.05
(0.050
1.27 (0.050)
±0.001
)
#1
7.0 (0.275)
0.9 (0.035)
#41
4.0
(0.157)
1.0
(0.039)
10.0
(0.393)
12.0 (0.472)
12.70 (0.500)
R 0.635 (0.025)
1.27 (0.050)
■ PC BOARD LAYOUT
±0.1
±0.004
61.67
(2.427
)
±0.001
(0. 059
±0.05
1.52
)
±0.001
(0. 059
±0.05
1.52
)
±0.1
±0.004
(1.950
49.53
±0.05
±0.001
(0.031
0.81
)
±0.05
±0.001
(0.031
0.81
)
58.17
)
±0.5
±0.001
1.27
(0.050
)
±0.05
±0.1
±0.004
(2.290
)
(0.166
4.22
±0.001
)
1.37
(0.053
R
±0.5
(0.145
)
)
±0.004
±0.004
±0.001
)
(0. 137
(0.059
±0.1
±0.1
3.50
1.52
±0.5
3.70
±0.001
)
.95
(0.039)
Recommended
PCB Thickness
)
)
1.0 ± 0.1 mm
±0.004
±0.004
(0.011
(0.118
±0.1
±0.1
Unit: mm (in.)
0.28
3.00
6.72
3.65
(0.264)
(0.139)
Unit: mm (in.)
■ PART NUMBER
FCN-248Q080-L/ES
Specifications
subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
5
PLUG, SMT (STRADDLE MOUNT) FIBER CHANNEL
■ DIMENSIONS
41.10 (1.618)
32.47 (1.278)
29.87 (1.176)
25.77 (1.015)
24.13 (0.95)
1.27
±0.3
±04
24.13
26.60 (1.047)
32.47 (1.278)
39.96
±04
1.27 (0.05)
(0.05
(0.95
±0.016
(1.562
±0.016
±0.012
#1
5.0±0.15
(1.197±0.006)
#21
ESD contact
1.0 (0.039)
10.0 (0.394)
1.27 (0.05)
R 0.635(0.25)
7.0 (0.276)
4.0 (0.157)
12.0 (0.472)
12.7 (0.5)
(0.039)
6.72
(0.264)
3.65
.95
(0.139)
1
21
)
)
)
#20
20
40
#40
10.0 (0.394)
R 1.6 (0.63)
240 Series FC-AL
Unit: mm (in.)
■ PC BOARD LAYOUT
)
)
±0.002
(0.60
±0.05
1.52
±0.002
(0.60
±0.05
1.52
0.81
±0.05
36.27
(0.032
0.81
(0.032
#20
24.13
±0.002
±0.05
±0.1
±0.002
(1.428
±0.1
)
)
(0.95
±0.004
±0.004
1.27
(0.05
4.22
(1.66
)
±0.05
±0.002
)
#1
±0.05
±0.002
)
)
)
)
±0.05
±0.002
3.70
(0.146
)
±0.05
±0.004
(1.38
±0.1
3.50
±0.002
1.37
(0.054
R 0.7
)
(0.028)
)
Recommended
±0.002
±0.004
±0.004
PCB Thickness
1.0 ± 0.1 mm
(0.60
(0.102
(0.011
±0.1
±0.1
±0.05
1.52
0.28
2.60
)
Unit: mm (in.)
■ PART NUMBER
FCN-248Q040-L/ES
Specifications
subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
6
SINGLE SIDE SMT SCA.2
■ DIMENSIONS
54.2 (2.134)
18.2 (0.717)
57.87 (2.278)
66.5 (2.618)
55.27 (2.176)
Pos/2
7.0
(0.276)
Pos
2.5
(0.098)
(0.040)
1 (0.040)
1.5
(0.060)
1
49.53 (1.95)
66.4(2.614)
To initial point of contact
50.165 (1.975)
58.765 (2.314)
61.1 (2.406)
64.7 (2.547) Retention leg pitch
1.27 (0.05)
X
X
0.20 (0.008)
0.635
(0.025)
0.2 A
Insulator
No.1
5.0
(0.197)
Pos/2+1
Retention Leg
Signal contact
ø1.55
-0.05
(
ø0.061
- 0.002
4.3
(0.169)
-A-
To initial point of contact
+0
+0
)
1.85
(0.073
8.8
(0.346)
13.8
(0.543)
8.2(0.322)
8.8(0.346)
(0.083)
X-X(5/1)
Sect. X-X
±0.25
±0.001
2.1
248Q Series SCA.2
)
2.2(0.087)
2.96(0.117)
±0.15
2.65
±0.006
(0.104
(0.104
2.65
1.6
(0.063)
)
±0.15
±0.006
)
6.6 (0.256)
5.9 (0.232)
)
±0.001
(0.079
±0.25
2.0
To initial point of contact
Unit: mm (in.)
■ PC BOARD LAYOUT
(2-ø0.063
4-ø1.2
(4-ø0.047
Through hole
2.65±0.05
±0.05
±0.002
±0.05
2.65
(0.104±0.002)
(0.104±0.002)
■ PART NUMBER
FCN-248Q080-L/FS
Specifications
subject to change
2-ø1.6
±0.05
±0.002
)
)
No. 80
No. 40
0.1 B
80-0.42
-0.05
(80-0.017
- 0.002
64.7±0.05 (2.547±0.002)
±0.05 (2.314±0.0002)
58.765
0.635 x 79= 50.165
(0.025 x 3.110 = 1.975)
+0
+0
)
Recommended PC Board
0.635
(0.025)
No.41
No. 1
4.3
(0.169)
2.0±0.1
-B-
mounting dimensions
Thickness 1.0
±0.1
mm (0.040
±0.004
)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
)
±0.004
2.2±0.1
(0.0887
)
±0.004
(0.079
4.7±0.1
)
±0.004
(0.185
Unit: mm (in.)
7
SOCKET, VERTICAL MOUNT FIBER CHANNEL
■ DIMENSIONS
43.60±0.4 (0.716±0.016)
41.40 (0.630)
37.40 (1.472)
34.40 (1.354)
A
29.67 (1.090)
26.03 (1.025)
±0.3 (0.95±0.012)24.13±0.3 (0.95±0.012)
24.13
±0.2
1.27
A
(0.05±0.008)
1
20
±0.3 (0.280±0.012)
5.30±0.15 (0.209±0.006)
7.10
240 Series FC-AL
1.70 (0.067)
FT
1.27
34.11±0.4 (1.343±0.016)
SSENKCIHTSSENKCIHT
SSENKCIHTSSENKCIHT
SSENKCIHT
31.60 (1.244)
B
B
±0.3 (0.05±0.008)
24.13±0.4 (0.95±0.016)
BWPDEDNEMMOCER
15°
40
±0.2
2.79
2.20 (0.086)
1.45
3.50
(0.138)
6.50
(0.256)
±0.3
±0.3
(0.453±0.012)
11.50
(0.388±0.012)
9.85
ESD contact
(0.109±0.008)
2.70±0.3
(0.106±0.012)
REBMUNTRAP
(0.057)
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
Unit: mm (in.)
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
mm8.0:TPSC/L-040B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-040B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-040B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-040B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-040B442-NCF)061.0(60.4)861.0(72.4
■ PC BOARD MOUNTING PATTERN
)
±0.004
4.99
(0.086
(0.196)
±0.1
1.905 (0.075)
2.20
0.952 (0.037)
2.70
)
±0.004
(0.106
#21
)
Specifications
subject to change
2.60
±0.1
(0.102
±0.004
Ø 2.60
±0.1
(Ø 0.102
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
34.11(1.343)
1.27 (0.05)
#2#1
#22
±0.1
±0.004
)
#19
Ø 0.80
(Ø 0.031
±0.8
±0.003
#39
#20
Ø 2.60
(Ø 0.102
±0.1
±0.004
)
#40
)
Unit: mm (in.)
8
SOCKET, VERTICAL MOUNT
■ DIMENSIONS
69.00 (2.71)
62.80 (2.47)
59.80 (2.35)
55.07 (2.17)
51.80 (2.039)
1.27 (0.05)
49.53 (1.95)
57.00 (2.44)
7.10 (0.280)
5.30 (0.208)
240 Series (SCA.2)
1.27 (0.05)
49.53 (1.95)
59.51 (2.44)
BWPDEDNEMMOCER
SSENKCIHTSSENKCIHT
SSENKCIHTSSENKCIHT
SSENKCIHT
mm8.0:TPSC/L-080B442-NCF)470.0(88.1)470.0(88.1
mm6.1:TPSB/L-080B442-NCF)011.0(97.2)601.0(07.2
mm0.2:TPSD/L-080B442-NCF)321.0(21.3)321.0(21.3
mm4.2:TPSE/L-080B442-NCF)421.0(41.3)631.0(54.3
mm2.3:TPSF/L-080B442-NCF)061.0(60.4)861.0(72.4
■ PC BOARD MOUNTING PATTERN
)
±0.004
(0.086
±0.1
2.20
1.905 (0.075)
0.952 (0.037)
#1
#2
(A)
REBMUNTRAP
59.51 (2.031)
6.50 (.256)
3.50 (.138)
Electrostatic Discharge
(B)
9.85 (.388)
11.50 (.457)
2.20 (.086)
#39
1.45 (.057)
#40
Unit: mm (in.)
TCATNOCLANGIS
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP)A(HTGNELTSOP
)A(HTGNELTSOP
TCATNOCDSE
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP)B(HTGNELTSOP
)B(HTGNELTSOP
Specifications
subject to change
2.60
(0.102
±0.1
±0.004
#42
±0.1
2.70
±0.004
(0.106
)
±0.004
)
)
0.80
(0.031
±0.1
±0.004
)
#79
#80
2.60
(0.102
±0.1
±0.004
#41
(0.102
±0.1
2.60
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
)
Unit: mm (in.)
9
240 Series (SCA.2)
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@fcl.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: components@us.fujitsu.com
Web: http://us.fujitsu.com/components
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its af filiates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications
subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
10
Loading...