Fujitsu QR1006 Service Manual

Data Sheet FUJITSU Storage CELVIN® NAS QR1006 Storage

Data Sheet

FUJITSU Storage CELVIN® NAS QR1006
Storage

Powerful 8-Drive NAS Rack Solution

The FUJITSU Storage CELVIN® NAS QR1006 is the ideal solution for le sharing, end to end

backup options and SAN (Storage Area Network) integration for SMB customers - enabling
centralized data management at a reasonable price. It has dual power supplies for superior
reliability with up to 64 TB of storage capacity and is designed to be rack mounted right
alongside other networked enterprise equipment.

Business Server Features

 Rack mountable
 Up to 8 hot swappable business critical or NAS drives
 VMWare®/Citrix®/HyperV™ Capable
 Redundant power supplies and cooling
 High peformance through 10Gbit Ethernet

Reliability

 Service-friendly cabinet
 3-years spare part supply
 Country-specic warranty
 Top-up services are available

Page 1 / 6 www.fujitsu.com/fts/accessories

Data Sheet FUJITSU Storage CELVIN® NAS QR1006 Storage

CELVIN® NAS QR1006

Technical specications

Linux embedded system
Firmware based on 4.2.x or higher
Processor:64-Bit Quad-Core AMD® G-Series 2.0GHz
Memory:

2 slots, max total 16GB DDR3L RAM; pre-installed 4GB , one free slot

512 MB Flash on DOM
FAN:2x quiet cooling fan (7 cm)
Formfactor: Rackmount 2U

Hard disk capacity Up to 8 x 2.5-inch or 3.5-inch SATA I/II/SATA 6Gb/s HDD or SSD up to 64 TB raw capacity, consult HDD compatibility list

NAS HDD: ready for 24x7 use; Business Critical HDD: tailored for 24x7 reliability

Interface add on cards/components (optional)

USB 2.0 total 2
USB 3.0 total 2
LAN / Ethernet Rear side: x4 Gigabit RJ-45 Ethernet port (always on)

Functional Description

Networking TCP/IP (IPv4 /IPv6 dual stack), multi IP setting,LACP,

Rear side: x1 10GbE PCI-E - pre-installed SFP + NIC)

Port trunking /NIC teaming:

Balance-rr (Round-Robin), Active Backup, Balance XOR, Broadcast, IEEE 802.3ad,
Balance-tlb (Adaptive, Transmit Load Balancing), Balance-alb (Adaptive Load Balancing)
DHCP client, DHCP server including PXE boot
CIFS/SMB(1.0,2.0,2.1,3.0 selectable), SAMBA 4, AFP/Netatalk3.3, NFS v3, HTTP, HTTPS, FTP,SFTP(admin),
DDNS, NTP, Telnet, SSH, iSCSI, SNMP,WebDAV,SMSC
Gigabit w/ Jumbo Frame, Bonjour

iSCSI target (with multi-LUNs per target), Up to 256 LUNs/targets combined

iSCSI LUN online expansion
LUN mapping / LUN masking
Online LUN capacity expansion
SCSI Primary Commands -3 (SPC-3) support / persistent reservation
MC/S (multiple TCP connections / session) support to reach iSCSI target
MPIO (multipath input output) for load balancing and failover

iSCSI LUN Backup, One-time-Snapshot and Restore
iSCSI initiator for virtual disks (max 8 disks); stack chaining master
Virtual disk support for EXT3/ EXT4/ NTFS/ FAT32/ HFS+
iSCSI Connection and Management by Fujitsu Finder (Windows)

Support for VMware VSphere (ESXi 5.x) via NFS and iSCSI

(VMware VAAI for iSCSI and VAAI for NAS)
Windows Server 2008 support (Hyper-V & failover clustering)

Windows Server 2012 R2 Hyper-V;
ODX support
Citrix XenServer (6.2)

VLAN 802.1Q
USB WiFi-Adapter support IEEE 802.11b/g/n/ac

WEP, WPA-personal (AES/TKIP), WPA2-personal (AES)

Connection to wireless network or Ad Hoc network

Page 2 / 6 www.fujitsu.com/fts/accessories