Fujitsu M8000, M9000 User Manual

Download

Page 1

SPARC Enterprise

M8000/M9000 Servers

Getting Started Guide

Accessing the Documentation Files

The documentation set for SPARC Enterprise M8000/M9000 servers is available on the following websites:

Global Site

http://www.fujitsu.com/sparcent er pri se/ ma nual/

Japanese Site

http://jp.fujitsu.com/platform/ se rve r/s pa rcente rp ris e/m an ual /

Note – For late-breaking information about the SPARC Enterprise M8000/M9000 servers hardware, software,

or documentation, refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes at:

http://www.fujitsu.com/sparcent er pri se/ ma nual/

Page 2

SPARC Enterprise M8000/M9000 Servers Documents

System planning and installation preparation

• SPARC Enterprise M8000/M9000 Servers Overview Guide

• SPARC Enterprise M8000/M9000 Servers Site Planning Guide

System installation and component addition/ removal

Operation and management

Repair and troubleshooting

Manuals related to the SPARC Enterprise M8000/M9000 servers installation:

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Important Legal and Safety Information

• SPARC Enterprise M8000/M9000 Servers Getting Started Guide

• SPARC Enterprise M8000/M9000 Servers Unpacking Guide

• SPARC Enterprise M8000/M9000 Servers Installation Guide

• SPARC Enterprise M8000/M9000 Servers Safety and Compliance Guide

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide

Manuals related to SPARC Enterprise M8000/M9000

servers

expansion (active, cold, and hot expansion):

• SPARC Enterprise M8000/M9000 Servers Service Manual

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Product Notes

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF Reference Manual

• SPARC Enterprise M4000/M5000/M8000/M9000 Servers Dynamic Reconfiguration (DR) User’s Guide

• SPARC Enterprise M8000/M9000 Servers Service Manual

• SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide

Globalization

• For SPARC Enterprise M8000/M9000 servers, the documents of localized versions will be offered on the

http://www.fujitsu.com/sparce nt erpri se /manu al/

website:

Page 3

Installation Steps for SPARC Enterprise M8000/M9000 Servers

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

Step 16

• Check the power source, air conditioning equipment, and location of the installation

site. For details, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.

• Unpack the product package by referencing the SPARC Enterprise M8000/M9000 Servers Unpacking Guide, which comes with the server.

• Install the main unit. If there is an expansion cabinet to be connected to the SPARC Enterprise M9000 server, or a power supply cabinet to be mounted in the SPARC Enterprise M8000 server or SPARC Enterprise M9000 server, connect each of them to the relevant cabinet. For details, see the

Installation Guide

• Connect the input power cables to the main unit. For details, see the

Enterprise M8000/M9000 Servers Installation Guide

• Connect the console to the main unit. For details, see the

M9000 Servers Installation Guide

• Turn on the main line switch of the main unit. For details, see the

M8000/M9000 Servers Installation Guide

• Set necessary information for hardware. For details, see the

M9000 Servers Installation Guide

• Turn on the power to the main unit. POST is automatically executed after poweron. For details, see the

• Set a LAN port on the XSCF unit and connect it. For details, see the

M8000/M9000 Servers Installation Guide M5000/M8000/M9000 Servers XSCF User’s Guide.

• If you are installing other peripheral devices in the main unit, proceed to Step 11.

• If you are not installing peripheral devices in the main unit, proceed to Step 14.

• Turn off the power to the main unit. For details, see the

M9000 Servers Installation Guide

• Install other peripheral devices. For details, see manuals supplied with each peripheral device.

• Turn on the power to the main unit. POST is automatically executed after power-on. For details, see the

• Check the network connection of domain. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.

• Confirm the operation by using Oracle VTS. For details, see the

M8000/M9000 Servers Installation Guide

• Perform the setup required for the operation of the system. For details, see the

SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide.

SPARC Enterprise M8000/M9000 Servers Installation Guide

SPARC Enterprise M8000/M9000 Servers

SPARC Enterprise M8000/

SPARC Enterprise

SPARC Enterprise M8000/

SPARC Enterprise

and the SPARC Enterprise M3000/M4000/

SPARC Enterprise M8000/

SPARC Enterprise

and the Oracle VTS User's Guide.

SPARC

Page 4

Accessing Important Information for SPARC Enterprise Series Servers

Before you deploy your server, check for the Product Notes for your server and other important information on the following websites:

Global Site

http://www.fujitsu.com/sparcen te rpr ise /m anual/ no tes /

Japanese Site

http://jp.fujitsu.com/platform /s erv er/ sp arcent er pri se/ ma nua l/not es

Accessing Documentation

The following websites provide the latest versions of SPARC Enterprise Series manuals:

Global Site

http://www.fujitsu.com/sparcen te rpr ise /m anual/

Japanese Site

http://jp.fujitsu.com/platform /s erv er/ sp arcent er pri se/ ma nua l/

Documentation Feedback

If you have any comments or requests regarding this document, go to the following website and state the manual code, documentation title, and your points specifically:

http://www.fujitsu.com/global/ co nta ct/ co mputin g/ spa rce _i nde x.htm l

FUJITSU LIMITED

Manual Code: C120-E323-05EN, January 2012, Revision A