Page 1
Workgroup
Departmental
Production
• Fast scan rates of up to 85
pages per minute simplex or
130 images per minute duplex
• Superior paper handling
capabilities, including a prepicking function, double-feed
detection and paper-end
detection
• High-volume 1,000-sheet input
and exit hoppers for unattended
batch scanning convenience
• ScanRight™image processing
technology, including dynamic
thresholding and automatic
separation for advanced image
enhancement
• TWAIN and ISIS driver
support for seamless application
integration
Fujitsu offers a series of duplex document image
scanners designed for supreme performance, quality
and reliability—the M3099EH/GH and M3099EX/GX.
The scanners are available with your choice of a
SCSI-II or an RS-232/video interface.
High-Performance, High-Volume
Duplex Scanners
The M3099EH/GH is the ideal scanner for
environments requiring high-speed, high-volume
duplex scanning of documents up to 8.5 x 14
inches. It provides unprecedented scan rates of up
to 85 pages per minute in simplex mode and up to
130 images per minute in duplex mode, to meet
increasing productivity requirements.
The M3099EX/GX is a high-performance duplex
image scanner that handles document sizes as large
as 11 x 17 inches. In addition to its superior flexibility,
the M3099EX/GX scans up to 65 pages per minute
in simplex mode and 110 images per minute in duplex
mode. All models deliver excellent image quality with
resolutions up to 400 dpi.
Fujitsu’s M3099EH/GH
and M3099EX/GX scanners
deliver the right combination of
performance, image quality and
paper handling for the ultimate
in production-level document
imaging capabilities.
M3099 Series
Production
Document Scanners
IMAGING
Scanner
Page 2
Dynamic Thresholding to automatically adjust
contrast levels in documents that contain
handwritten or typed characters; Noise Removal to
remove particles on copied or faxed documents;
Ball Point Pen Mode which compensates for
varying reflective light characteristics of ink and
much more. And now with the M3099EH/GH and
M3099EX/GX scanners, these image processing
functions are preset and accessible through the userfriendly backlit operator panel providing optimum
image quality.
Maximizes Your Up-Time
Fujitsu backs each M3099 series scanner with a
one-year on-site warranty. It’s our commitment to
providing you the ultimate in performance, reliability
and service. Also available during the warranty and
post-warranty period is ScanCare
SM
, the industry’s
leading full preventative maintenance program to
keep your scanner operating at peak performance.
With every ScanCare and ScanCare Plus purchase,
you receive Priority Service* at no additional cost.
Priority Service may also be purchased separately as
an upgrade to the existing standard one-year on-site
product warranty or as a post-warranty service
contract. Call (800) 626-4686 for further details
about ScanCare and Priority Service. Finally, to
make sure that downtime is kept to a minimum,
every M3099 series scanner comes with one free
cleaning kit and one free consumables kit.
About Fujitsu Computer Products
of America
Fujitsu Computer Products of
America is a wholly owned
subsidiary of Fujitsu Limited,
one of the world’s largest
computer companies with
$37.7 billion in worldwide
revenue. Benefiting from
Fujitsu Limited’s $3 billion
annual investment in research
and development, Fujitsu
Computer Products provides
innovative solutions for the
U.S. marketplace. Current
product offerings include: high
performance hard disk drives,
tape drives, magneto-optical
drives, high volume scanners,
and printers.
*Available in select cities only. Call (800)
626-4686 for further details.
© 1999 Fujitsu Computer Products of America, Inc. All rights reserved. The statements in
this publication are not intended to create any warranty, expressed or implied. Fujitsu
Computer Products reserves the right to change equipment and performance specifications
stated herein without notice. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu
Limited. ScanRight is a trademark and ScanCare is a service mark of Fujitsu Computer
Products of America, Inc. The TWAIN logo is a registered trademark of the TWAIN Working
Group. All other trademarks mentioned herein are the property of their respective owners.
Printed in the U.S.A. Qty 10M P/N DS20100299
IMAGING
Better Paper Handling For
Greater Convenience
The M3099EH/GH and the M3099EX/GX were
designed to streamline even the busiest document
imaging environments. Among the six features
designed to optimize the scanning process are a prepicking function that prepares the next document
for reading while the current document is scanned;
an input hopper and exit tray that hold up to 1,000
sheets, allowing you to load more documents for
unattended scanning; three built-in page counters
that make it easy to monitor scanned batches and
the life of your consumables; a double-feed
detection capability that eliminates missed images by
alerting you if more than one sheet is pulled through
the scanner at a time; an automatic end-of-page
detector that extinguishes extra white space when
scanning mixed-length batches; and an optional fieldinstallable post-scan ink endorser that ensures
every document scans successfully by marking each
document as it scans.
ScanRight™Technology Makes It Better
Standard on all M3099 scanners, Fujitsu’s ScanRight
image processing technology delivers unparalleled
image quality while maintaining the scanner’s high
throughput.
ScanRight enables advanced imaging features such
as Automatic Separation allowing documents with
text and photos to be scanned in a single pass;
FUJITSU COMPUTER PRODUCTS
OF AMERICA, INC.
2904 Orchard Parkway
San Jose, CA 95134-2009
(800) 626-4686
(408) 432-6333
Web site: http://www.fcpa.com
Email: info@fcpa.fujitsu.com
M3099EX/GX
CCD (charge-coupled device) image sensor
200, 240, 300, 400 dpi (user selectable)
Dither, error diffusion
65 pages per minute
110 images per minute
Automatic document feeder (ADF)
and manual feeder
1,000 sheets
2.5 in. x 3 in.
11 in. x 17 in. (double letter)
EX: RS-232/video
GX: SCSI-II
EX: Available via third-party video
controller board
GX: Group 3 and Group 4
Binary; 64-step dither; error diffusion
Red lamp (user installable)
Post-scan ink endorser (field installable)
ScanCare Program
Priority Service
100-120 V AC, 50/60Hz
200-240 V AC, 50/60Hz
41°F – 95°F (5°C – 35°C)
20%-80% (non-condensing)
0.25K V A
24 in. x 26.8 in. x 20.9 in.
Less than 143 lbs.
1 year on-site
M3099 Series Specifications
Description
Technology
Resolutions
Halftone patterns
Scanning speed
Simplex
Duplex
Document feeding mode
Hopper capacity
Document size
Minimum
Maximum
Interfaces
Compression
Image type output
Options
Power requirements
Operating environment
Temperature
Relative humidity
Power consumption
Dimensions (HxWxD)
Weight
Limited Warranty
M3099EH/GH
CCD (charge-coupled device) image sensor
200, 240, 300, 400 dpi (user selectable)
Dither, error diffusion
85 pages per minute
130 images per minute
Automatic document feeder (ADF)
and manual feeder
1,000 sheets
2.5 in. x 3 in.
8.5 in. x 14 in. (legal)
EH: RS-232/video
GH: SCSI-II
EH: Available via third-party video
controller board
GH: Group 3 and Group 4
Binary; 64-step dither; error diffusion
Red lamp (user installable)
Post-scan ink endorser (field installable)
ScanCare Program
Priority Service
100-120 V AC, 50/60Hz
200-240 V AC, 50/60Hz
41°F – 95°F (5°C – 35°C)
20%-80% (non-condensing)
0.25K V A
24 in. x 26.8 in. x 20.9 in.
Less than 143 lbs.
1 year on-site
Loading...