Fujitsu FTP-644MCL002, FTP-604, FTP-644MCL001 User Manual

BATTERY DRIVE, FTP-604 Series 4” TYPE MECHANISM AND INTERFACE BOARD
FTP-644MCL001/002/FTP-624DCL/DSL
OVERVIEW
FTP-644MCL/FTP-624DCL/DSL Series is a high speed line thermal printer driven by battery, printing on 4-inch wide paper (112 mm/ 114 mm).
The printer is compact and lightweight, and the design allows easy head maintenance, head cleaning and head replacement.
FTP-644MCL001
HIGHLIGHTS
• High speed printing
It can print at 50 mm/s (400 dotlines/s) maximum by using Fujitsu
• Compact and lightweight
The printer has a low profile of only 20 mm, and a light weight of approximately 125 g.
• Low power consumption
The peak current for head drive is only 3.5 A (8.5VDC, 128 dots on).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever operation.
• UL recognized
File No. E171434
Components' unique head drive control.
FTP-624CU102
FTP-624DCL/DSL002
1
DESIGNATION
FTP-644MCL001/002/FTP-624DCL/DSL002
Part numberItem
Printer mechanism FTP-644MCL001/002*
Interface Board
LSI Micro Controller Unit FTP-624CU102
Cables
*1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path). *2: 002 supports ANK, 102 support ANK and Kanji. *3: 002 supports ANK, 103 support ANK and Kanji.
Centronics RS-232C
Thermal head cables FTP-624Y002, FTP-624Y003 Parallel interface cable FTP-441Y201 Serial interface cable FTP-624Y301 Power cable (logic, head and motor) FTP-621Y401, FTP-621Y601
FTP-624DCL002*
FTP-624DSL002*
GENERAL SPECIFICATIONS
SpecificationsItem
Part number FTP-644MCL001/002 Printing method Thermal-sensitive line dot method Dot structure 832 dots/line
1
2
3
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 104 mm Paper width (MCL001) 112 mm Paper width (MCL002) 114 mm Paper thickness 60 to 100 µ m* Number of columns 104 columns/line (16 × 8 dot font) Maximum printing speed
Character types ASCII : 31
Character composition, dimensions (H×W), Number of characters
Interface Centronics / RS-232C
400 dotlines/s (50 mm/s) [Condition] 1 ply, printing on high sensitive thermal paper, 8 columns of “H” /line, double density 16 × 8 dot font, room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
24 × 12 dots, (3.0 × 1.5 mm), 69 columns 16 × 8 dots, (2.0 × 1.0 mm), 104 columns 16 × 16 dots, (4.0 × 2.0 mm), 52 columns 24 × 24 dots, (6.0 × 3.0 mm), 34 columns
1
(Continued)
2
(Continued)
FTP-644MCL001/002/FTP-624DCL/DSL002
SpecificationsItem
For head
Power supply
Dimensions
Weight (Mechanism) approximately 125 g Expected life Mechanism Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
Environmental conditions
For motor
For logic
Mechanism 138 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter) Interface board 131 (W) × 89(D) × 24 (H) mm
Operating temperature 0 to +50°C* Operating humidity 20 to 85% RH (no condensation) Storage temperature –20 to +60°C Storage humidity 5 to 95% RH (no condensation) Head temperature By thermistor (applied energy control, abnormal temperature detection)
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) Peak current: approx. 0.8 A (conditions: room temp., 7.2 VDC)
Voltage: 5 VDC ± 5% Current: 0.2 A maximum
driving method)
Wear resistance: 50 km (at 12.5% print ratio)
2
Detection Paper out/Mark detect By photointerrupter
Head-up By microswitch
For front insertion use (112 mm width) : FTP-040PU001, FTP-040PG021 For rear insertion use (114 mm width) : FTP-040P0020, FTP-040PG106
Recommended thermal sensitive paper
In Europe (112 mm width) :FTP-041P0060-45
· Oji Paper : PD160R, PD170R, PD150R
· NIPPON Paper : TF50KS-E4, TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
*1: There may be exceptions. *2: Guarantee +5°C to +40°C.
3
DIMENSIONS
Printer mechanism
20.1
FTP-644MCL001/002/FTP-624DCL/DSL002
PAPER INSERTION
(MCLOO1)
HEAD UP LEVER (AT HEAD DOWN)
1.5
(7.5)
45.5
(150)
CENTER OF PAPER
PAPER INSERTION
(MCLOO2)
2-MOUNTING HOLE
HEAD CONNECTOR
65.771.8 (137.5)
±1
Unit: mm
4
Interface board
FTP-644MCL001/002/FTP-624DCL/DSL002
33.0
5.1
15.2
130.8
120.7
105.4
71.1
5.1
CN3
88.9
78.7
39.4
5.15.1
5.1
17.0
5.0
* CN9 on FTP-624DSL only ** CN8, CN11, CN12 not used
CN9
CN10
CN12
CN11
59.7
CN1
73.7
105.4
114.2
120.7
Mounting Height
Mounting Height
CN2
86.4
CN5
CN4
5.1
CN7
CN8
52.1
CN6
39.4
26.7
5.1
5.1
4-03.6
.6
Unit: mm
FUNCTION
ITEM ITEM
1. Test printing 8. Motor power save
2. Paper-out detection 9. Mark detection
3. Paper near end detection 10. MCU trouble detection
4. Head-up detection 11. Power on/off sequence protection
5. Abnormal temp. of thermal head detection 12. Motor protection
6. Blown fuse detection 13. Hardware timer
7. Abnormal voltage detection of head
5
FTP-644MCL001/002/FTP-624DCL/DSL002
.oNlangiStnemmoC
1NESVrosnesrepaprofrewoP 2EHProttimeretpurretniotohP 3KHPedohtacretpurretniotohP 41WS1hctiwstcetedpudaeH 52WS2hctiwstcetedpudaeH
CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side 1 : B11B-PH-K-S-2.2 (J.S.T.) or equivalent 2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent Board side 1: PHR-11 (J.S.T.) or equivalent 2: PHR-12 (J.S.T.) or equivalent
Connector Thermal Head 1
.oNlangiStnemmoC
15BTS5langiselbanetnirP 26BTS6langiselbanetnirP 37BTS7langiselbanetnirP 48BTS8langiselbanetnirP 5KLCkcolcnoissimsnartataD 6TALlangisgnihctalatadtnirP 7NIDlangistuptuoatadtnirP 8DNGdnuorgdaeH 9DNGdnuorgdaeH
01HVdaehrofrewoP 11HVdaehrofrewoP
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Motor
1, 2, 3, ...............9, 10 1, 2, 3, ...............10, 11
Connector Thermal Head 2
.oNlangiStnemmoC
1HVdaehrofrewoP 2HVdaehrofrewoP 3DNGdnuorgdaeH 4DNGdnuorgdaeH 5*HT 61BTS1langiselbanetnirP 72BTS2langiselbanetnirP 83BTS3langiselbanetnirP 94BTS4langiselbanetnirP
01DDVcigolrofrewoP
1
Head up level
noitcetederutarepmeT
Connector Pin No.
.oNlangiStnemmoC
1B noitaticxeliocrotomgnippetS 2B noitaticxeliocrotomgnippetS 3A noitaticxeliocrotomgnippetS 4A noitaticxeliocrotomgnippetS
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent Board side : B5B-PH-K-S (J.S.T.) or equivalent
6
FTP-644MCL001/002/FTP-624DCL/DSL002
Europe
Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004.
7
Loading...