BATTERY DRIVE, FTP-608 Series
3" HIGH SPEED THERMAL PRINTER
FTP-638MCL101/103, Easy Loading Method
■ OVERVIEW
The easy loading FTP-608 MCL Series is ultra compact high speed, battery driven thermal printer, printing 3-inch wide paper (80mm) where platens are removable. Our original platen removal mechanism improved paper loading and maintenance.
The FTP-608 MCL series can be used for a variety of applications, such as portable terminals, POS, ticket issuing terminals, label printers, banking terminals, and measurement and medical equipment.
■HIGHLIGHTS
•Easy loading type
Our original platen removal mechanism improved paper loading and maintenance.
• Ultra compact
Height 15.5 mm, width 92.3mm, depth 33.0 mm for the 3 inch model.
•High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
FTP-638MCL101/103
■ PART NUMBERS
|
Item |
Part Number |
||
|
|
|
|
|
Printer mechanism |
FTP-638MCL101 (3-inch wide paper: 80mm) without platen open detect switch |
|||
FTP-638MCL103 (3-inch wide paper: 80mm) with platen open detect switch |
||||
|
|
|
||
|
|
|
||
LSI for driving |
FTP-628CU301(ANK only) |
|||
|
|
|
|
|
Interface |
|
Parallel |
FTP-628DCL300 (Centronics) |
|
|
|
|
||
Board |
|
|
FTP-628DSL305 (RS-232C) |
|
|
|
|
||
|
|
|
|
|
|
|
Parallel |
FTP-628Y202 |
|
|
|
|
|
|
Cables |
|
Serial |
FTP-628Y302 |
|
|
|
|
|
|
|
|
Power |
FTP-628Y402 |
|
|
|
|
|
|
■ SPECIFICATIONS
Item |
Specifications |
|
|
|
|
|
|
Part number |
FTP-638MCL101/103 |
|
|
|
|
|
|
Printing method |
Thermal-line dot method |
|
|
|
|
|
|
Dot structure |
576 dots/line |
|
|
|
|
|
|
Dot pitch (Horizontal) |
0.125 mm (8 dots/mm)—Dot density |
|
|
|
|
|
|
Dot pitch (Vertical) |
0.125 mm (8 dots/mm)—Line feed pitch |
|
|
|
|
|
|
Effective printing area |
72 mm |
|
|
|
|
|
|
Number of columns |
ANK 32 columns/line (maximum 12x 24 dot font) |
|
|
|
|
|
|
Paper width |
80 mm+0-1 |
|
|
|
|
|
|
Paper thickness |
60 to 100 μ m (some paper in this range may not be used because of |
||
|
|
paper characteristics |
|
|
|
|
|
Printing Speed |
Maximum 60mm/sec. (480 dot line/sec.) at 8.5 V |
|
|
|
|
|
|
Character types |
Alphanumeric, katakana: |
159 types |
|
|
|
International and special characters: |
195 types |
|
|
JIS Kanji level 1, level 2, non-Kanji |
|
|
|
(supported only when Kanji CG is mounted): |
about 6800 types |
|
|
|
|
Character, dimensions (H×W), number of |
12 x 24 dots, 48 columns: ANK |
|
|
columns |
24 x 24 dots, 28 columns: ANK, Kanji |
|
|
|
|
8 x 16 dots, 72 columns: ANK |
|
|
|
16 x 16 dots, 36 columns: ANK, Kanji |
|
|
|
|
|
2
FTP-638MCL101/103
■ SPECIFICATIONS
|
Item |
Specification |
||
|
|
|
||
|
FTP-638MCL101/103 |
|
||
|
|
|
||
|
|
|
||
Interface |
|
Conforms to RS232C / Centronics |
||
|
|
|
||
|
For print head |
4.2 VDC to 8.5 V, average current 1.37A (1.53) peak value |
||
|
Printing ratio: 12.5%, printing speed 50mm/sec., 7.2 V |
|||
Operating |
|
|||
|
|
|
||
For motor |
4.2 VDC to 8.5 V, 1 A maximum |
|||
Voltage |
||||
|
|
|
||
|
For logic |
2.7 to 5.25 VDC, 0.1 A maximum |
||
|
|
|
||
Dimensions |
Printer mechanism |
92.3 x 33.0 x 15.5 mm (WxDxH) |
||
|
|
|
||
Interface board |
69.3 x 52.0 x 15.0 mm (WxDxH) |
|||
|
||||
|
|
|
|
|
Weight |
Printer mechanism |
Approximately 52g |
|
|
|
|
|
||
Interface board |
Approximately 20g |
|
||
|
|
|||
|
|
|
||
|
|
Pulse resistance: 100 million pulses/dot (under our |
||
Head life |
|
standard conditions). Abrasion resistance: paper traveling |
||
|
|
distance 50km (print ratio: 25% or less) |
||
|
|
|
|
|
|
Operating temperature* |
0˚ C to +50˚ C |
|
|
|
|
|
||
Operating |
Operating humidity |
20 to 85% RH (no condensation) |
||
|
|
|
||
environment |
Storage temperature |
-20˚ C to +60˚ C (paper not included) |
||
|
||||
|
|
|
||
|
Storage humidity |
5 to 95% RH (no condensation) |
||
|
|
|
|
|
Detection |
Head temperature |
Detected by thermistor |
|
|
detection |
|
|||
|
|
|||
function |
|
|
|
|
Paper out/mark detection |
Detected by photo-interrupter |
|||
|
||||
|
|
|
|
|
|
|
High sensitive paper: |
TF50KS-E4 (Nippon Paper) |
|
|
|
|
|
|
|
|
|
TK50KS-E (Nippon Paper) |
|
|
|
Standard paper: |
PD150R (Oji Paper) |
|
|
|
|
FTP-030P0701 (80mm) |
|
|
|
|
|
|
|
|
|
TK60KS-F1 (Nippon Paper) |
|
Recommended thermal sensitive paper |
Medium life storage paper: |
PD170R (Oji Paper) |
||
|
|
AFP220VBB-1 (Mitsubishi) |
||
|
|
|
||
|
|
|
FTP-030P0102 (80mm) |
|
|
|
|
|
|
|
|
|
PD160R-N (Oji Paper) |
|
|
|
Long life storage paper: |
AFP-235 (Mitsubishi Paper) |
|
|
|
TP50KJ-R (Nippon Paper) |
||
|
|
|
||
|
|
|
HA220AA (Nippon Paper) |
|
|
|
|
|
|
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
Loading...