FTP-639USL001/002
24V driven receipt, ticket printer 3” KIOSK printer unit
FTP-639USL001/002
n Overview
The FTP-639USL Series is 24V driven receipt printer unit with cutter for 3 inch wide paper. The unit has our high-speed FTP-639MCL354 mechanism/cutter and control board, with an integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as Kiosk, ATM, and receipt and ticket issuing printers for various other equipment.
n features
•Unit supported (mounting is easy)
•High speed printer (200mm / sec.)
•Auto cutter included
•Paper near end-detection function
•Paper presenter and retractor
•Up to 5 inch paper diameter
•Low power consumption
•Printer partial tilt function
•Prints 2-D barcodes
n DESIGNATION
|
Item |
Part Number |
|
|
|
|
|
Printer module interface |
Serial (RS-232C) |
FTP-639USL00 1* |
|
USB (Ver. 1.1) |
FTP-639USL002* |
||
|
|||
|
Serial Interface |
FTP-629Y30 2 |
|
Cables |
|
|
|
USB Interface |
FTP-629Y301 |
||
|
|
|
|
|
Power for logic, head, motor |
FTP-629Y60 1 |
|
|
|
|
*: Interface board is FTP-629DSL100 series
FTP-639USL001/002
n specifications
|
|
|
Item |
Specifications |
|
||
|
|
|
|
|
|
|
|
|
|
Part number |
|
|
FTP-639USL001/002 |
|
|
|
|
|
|
|
|
|
|
|
|
Printing method |
|
|
Thermal-sensitive line dot method |
|
|
|
|
|
|
|
|
|
|
|
|
Dot structure |
|
|
576 dots/line |
|
|
|
|
|
|
|
|
|
|
|
|
Dot pitch (Horizontal) |
0.125 mm (8 dots/mm)—Dot density |
|
|||
|
|
|
|
|
|
|
|
|
|
Dot pitch (Vertical) |
|
|
0.125 mm (8 dots/mm)—Line feed pitch |
|
|
|
|
|
|
|
|
|
|
|
|
Effective printing area |
72 mm |
|
|||
|
|
|
|
|
|
|
|
|
|
Paper width |
|
|
+0 |
|
|
|
|
|
|
80 -1 mm |
|
||
|
|
Paper thickness |
|
|
60 to 100 µm |
|
|
|
|
|
|
|
|
|
|
|
|
Paper print length |
|
|
50 to 250mm |
|
|
|
|
|
|
|
|
|
|
|
|
Cutting type |
|
|
Full or partial |
|
|
|
|
|
|
|
|
|
|
|
|
Number of columns |
48 columns/line (12×24 dot font) |
|
|||
|
|
|
|
|
|
|
|
|
|
Maximum printing speed |
200 mm/s (1600 dotlines/s) |
|
|||
|
|
|
|
|
|
|
|
|
|
Page mode |
|
Low speed mode |
40mm/sec |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Middle speed mode |
80mm/sec. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High speed mode |
125 mm/sec. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultra high speed mode |
200 mm/sec. |
|
|
|
|
|
|
|
|
|
|
|
|
Character types |
|
|
Alphanumeric KANA: 159 International characters : 195 |
|
|
|
|
|
|
JIS KANJI (FTP-622DSL107, DSL112): approximately 6800 |
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
Character composition, dimensions (H×W), |
24 × 12 dots, (3.0 × 1.5 mm), 48 columns |
|
|||
|
|
Number of characters |
24 × 24 dots, (3.0 × 3.0 mm), 24 columns |
|
|||
|
|
|
|
|
6 × 8 dots, (2.0 × 1.0 mm), 72 columns |
|
|
|
|
|
|
|
6 × 16 dots, (2.0 × 2.0 mm), 36 columns |
|
|
|
|
|
|
|
|
|
|
|
|
Interface |
|
|
Serial RS232C, USB |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
24VDC ± 5%, Voltage |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
Current : average*1 ( ): Peak |
|
|
|
|
|
|
For head |
TBA (2.04) A (at 200 mm/s printing speed, 12.5% printing ratio) |
|
|
|
|
Power supply |
|
|
TBA (1.03) A (at 80 mm/s printing speed, 12.5% printing ratio) |
|
|
|
|
|
|
TBA (0.51) A (at 40 mm/s printing speed, 12.5% printing ratio) |
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
For print motor |
24VDC ± 5%, 1.0 A maximum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For conveyance motor |
24VDC ± 5%, 1.0 A maximum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For cutter |
24VDC ± 5%, 1.2 A maximum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For logic |
5VDC ± 5%, 0.2 A maximum |
|
|
|
|
|
|
|
|
|
|
|
|
Dimensions |
|
|
36.5(W) × 165(D) × 155 (H) mm |
|
|
|
|
|
|
|
|
|
|
|
|
Weight (mechanism, cutter, board, frame) |
Approximately 1.5 kg |
|
|||
(Continued)
|
|
|
|
|
|
|
|
|
|
|
|
FTP-639USL001/002 |
|||
|
|
|
|
|
|
|
|
(Continued) |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Item |
Specifications |
|||
|
|
|
|
|
|
|
|
|
|
|
|
Pulse durability : 100 million pulse/dot (using Fujitsu's standard |
|||
|
|
|
Mechanism |
driving method) |
|
|
|
|
|
Expected life |
|
Wear resistance: 100 km (at 12.5% printing ratio) |
|||
|
|
|
|
|
|
|
|
|
|
|
Cutter |
500,000 cuts |
|
|
|
|
|
|
|
|
|
|
|
|
|
MTBF |
Mechanical |
3,000 hrs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interface Board |
500,000 cuts |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating temperature |
0˚C to +50°C |
|
|
|
|
|
|
|
|
|
|
|
|
|
Environmental |
Operating humidity |
20 to 85% RH (no condensation) |
|
|
|
|
|
conditions |
|
|
|
|
|
|
Storage temperature |
–20˚C to +65°C (excluding paper) |
|
|
|
||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
Storage humidity |
5 to 90% RH (no condensation) |
|
|
|
|
|
|
|
|
|
||
|
|
|
Head temperature |
By thermistor (applied energy control, abnormal temperature detection) |
|||
|
|
|
|
|
|
|
|
|
|
Detection |
Paper out/Mark detect |
By photointerrupter |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Platen open |
By microswitch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Near end paper |
By mechanical switch |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
For front insertion use (80 mm width) |
: FTP-030P0701/P0102 |
||
|
|
Recommended thermal sensitive paper |
Recommended papers |
|
|
|
|
|
|
· Oji Paper |
: PD150R,PD160R-N,PD170R |
||||
|
|
|
|
· NIPPON Paper |
: TF50KS-E,TF60KS-E, |
||
|
|
|
|
|
TF50KS-E4 |
||
|
|
|
|
· MITSUBISHI Paper Mills |
: P220VBB-1,AFP-233 |
||
|
|
Paper diameter |
Standard |
20mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extended (attachment) |
TBA |
|
|
|
*1: 24VDC, minimum head resistance. n FUNCTIONS
|
Item |
|
Item |
|
|
|
|
1. |
Test print function |
9. |
Internal RAM abnormality detection |
|
|
|
|
2. |
Paper feed |
10 . |
Cutter abnormality detection |
|
|
|
|
3. |
Paper out detection |
11 . |
Mark detection |
|
|
|
|
4. |
Paper near end detection |
12 . |
MCU operation abnormality detection |
|
|
|
|
5. |
Platen open detection |
13 . |
Motor power saving |
|
|
|
|
6. |
Thermal head temperature abnormality detection |
14. |
Power supply disconnection protection |
|
|
|
|
7. |
Motor temperature detection |
15. |
Motor protection |
|
|
|
|
8. |
Voltage abnormality detection |
16. |
Thermal head protection |
|
|
|
|
n INTERFACE , COMMAND, OPTIONS
Please refer to the FTP-629DSL100 series. Interface command options, please see FTP-629DSL100 datasheet.
Loading...