Fujitsu FTP-639MCL113 User Manual

FTP-639MCL064/113/364/393-R

24V DRIVE, FTP-609 SERIES
ULTRA HIGH SPEED (200

mm/s)

3" TYPE MECHANISM (with cutter)

FTP-639MCL064/113/364/393-R

n OVERVIEW

The FTP-609MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (200mm/s) for 3-inch wide
paper.

This series is suitable for a variety of applications, such as POS/
ECR, kiosk terminals, ticket machines, label printers, banking
machines, measuring devices, medical equipment, etc.

n HIGHLIGHTS

• Ultra high speed printing

It can print at 250 mm/s (2000 dotlines/s) maximum by using

Fujitsu Components' unique head drive control.

FTP-6x9MCL364R

• 2-D Barcode printing

QR, Maxi, PDF417

• ELM (Easy Loading Mechanism) with lock type

Fujitsu Components' unique platen release mechanism allows

easy paper setting and easy head maintenance.

• Auto Cutter

Printer with auto cutter (full cut/ partial cut) is available. It can

be mounted on top of the mechanism.

• Multi-featuring diecast frame

By application of multi-featuring diecast frame, continous print

by function of heat-sink, high ESD stand by function of earth
frame and shock/vibration stand by function of solid frame are
valid.

• Compact size

Depth: 63-70mm, width: 110-113mm, height: 37-38mm.

• High resolution

8 dots/mm head provides clear print out.

• RoHS compliant

1

FTP-639MCL064/113/364/393-R

n PART NUMBERS

Name Part Number

Bottom insertion FTP-639MCL064R FTP-629MCL105R FTP-639MCL064R

Printer mechanism

Mechanism with
cutter

LSI FTP-629CU151R FTP-629SR201R FTP-629CU301R

Interface board Parallel FTP-629DSL283R* FTP-629DSL281R* ---

Thermal head cable extension --- FTP-629Y001 ---

Interface cable
(board to
mechanism)

Power supply cable Logic FTP-629Y401 ---

Detachable
platen

Bottom insertion FTP-639MCL364R FTP-639MCL364R

Detachable
platen

Serial (RS232C) FTP-629DSL283R* FTP-629DSL281R* FTP-629DSL301R

USB FTP-629DSL232R* FTP-629DSL212R FTP-629DSL301R

Parallel FTP-628Y202 ---

Serial FTP-628Y302 FTP-629Y302

USB --- FTP-629Y301

Head, motor FTP-629Y601

FTP-639MCL113R FTP-639MCL115R FTP-639MCL113R

FTP-639MCL393R FTP-639MCL395R FTP-639MCL393R

FTP-629Y602

*1: #01 is for full cut, #02 is for partial cut *2: Interface is selectable by DIP switch

2

FTP-639MCL064/113/364/393-R

n GENERAL SPECIFICATIONS

Item Specications

Part number FTP-639MCL064/364-R FTP-639MCL113/393#01/#02-R

Printing method Thermal sensitive line dot method

Dot structure 640 dots/line

Dot pitch (horizontal) 0.125mm (8dots/mm) - Dot density

Dot ptich (vertical) 0.125mm (8dots/mm) - Line feed pitch

Effective printing area 80 mm

Number of columns ANK 53 columns/line (12 x 24 dot font) OCR 26 columns (24x40)

Paper width 82.5mm +0/-1

Paper thickness 60 to 150µm (there may be exceptions) 60 to 100µm

Cutting type Standard full or partial cut ELM full or partial

Printing

speed

Interface types FTP-629DCL/DSL200 series FTP-629DSL300 series

FTP-629DSL200 series

FTP-629DSL300 series

125mm/sec. (1000 dot lines/sec.) line mode

250mm/sec. (2000 dot lines/sec.) page mode

Character

types

Character, dimensions (WxH), number of

columns

Interface standard Centronics / RS232C /USB Serial/USB

Alphanumeric, Kana:

International:

JIS Kanji (Kanji CG

loaded board):

OCRI 103 types

OCRII 23 types

OCRIII103 types

Extended numeric

159 types

195 types

about 6800 types

8x16 dots, 80 columns: ANK

12x24 dots, 53 columns: ANK

16x16 dots, 40 columns: ANK

24x24 dots, 26 columns: ANK

159 types

195 types

about 6,800 types

103 types

23 types

103 types

11 types

24x40 dots, 26 columns, OCRI

24x48 dots, 26 columns, OCRIII

36x60 dots, 17 columns, OCRIV

24x48 dots, 26 columns,

extended numeric

3

FTP-639MCL064/113/364/393-R

Item Specications

Part number FTP-639MCL064/364-R FTP-639MCL113/393-R

Power supply For head 24 VDC ±5%, 3.0A (5.3A) (24V, 25% printing ratio)

For printer motor 24 VDC ±5% 1A maximum

For cutter motor 24 VDC ±5% 1A maximum

For logic 5 VDC ±5% 0.2A maximum

Dimension
W x D x H

Weight Printer mechanism Approximately 125g Approximately 125g

Life Head Pulse durability: 100 million pulse/dot

Environmental
conditions

Detection Head temperature By thermistor

Recommended
thermal
sensitive paper

Printer mechanism 104.2 x 40.5 x 20.5mm 104.2 x 40.5 x 20.5mm

Printer mechanism with cutter 110.4 x 62.5 x 37.2mm 112.5 x 70.3 x 37.4mm

Interface board (DSL200) 95 x 73.5 x 11.6mm

Interface board (DSL300) 77 x 50 x 21.5mm

Printer mechanism with cutter Approximately 320g Approximately 350g

Interface board (std) Approximately 25g

Interface board (medium speed) Approximately 45 g

Interface board (high speed) Approximately 20g

(using Fujitsu's standard driving method)
Wear resistance: 100km (at 12.5% print ratio)

Cutter 500,000 1,000,000 cuts minimum

Platen 5,000 times (open/close)

Operating temperature -10ºC to +60ºC (guarantee) 0ºC to +50ºC (guarantee)

Operating humidity 20 to 85% RH (no condensation)

Storage temperature -40ºC to +70ºC -20ºC to +60ºC

Storage humidity 5 to 95% RH (no condensation)

Paper out/Mark detect By photointerruptor

Head release By slide switch

High sensitive paper TF50KS-E4 (Nippon paper)

Standard paper TF60KS-E2 (Nippon paper), FTP-030P0104 (80mm)

PD150R (Oji paper), FTP-030P0701 (80mm)

Medium life storage paper TF60KS-F1 (Nippon paper), FTP-030P0102 (80mm)

PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)

Long life storage paper AFP-235 (Mitsubishi paper)

TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)

4

FTP-639MCL064/113/364/393-R

5.0

4.3

56.3

54.1

FUJITSU

JAPAN

F.T

(57.5)

27.5

45.0

51.6

28.5

29.9

23.0

32.6

25.5

15.5

34.0

S

24.3

25.3

(75.1)

3.0

3.5

90.0

CAUTION

Max2.5

Max0.5

37.2

15.0

S

Center of Platen

Paper Path

Center of Paper

Notes: 1. Nominal value (Tolerance +0.5, -0.5)

n FUNCTION

ITEM ITEM

1. Test printing 8. Cutter trouble detection

2. Paper-out detection 9. Motor power save

3. Paper near end detection 10. Mark detection

4. Head-up detection 11. MCU trouble detection

5. Abnormal temp. of thermal head detection 12. Power on/off sequence protection

6. Blown fuse detection 13. Motor protection

7. Abnormal voltage detection of head 14. Hardware timer

n DIMENSIONS

1. Printer mechanism / cutter

FTP-639MCL364R

Unit: mm

5

2. Printer mechanism / cutter

27.528.4

3 MAX

27.1

(47.2)

16.0

53.3

67.3

3.0

56.056.5

6.4

35.0

56û

8.5

2°

37.4

47.6 at full cut

49.6 at partial cut

Center of paper

Center of platen

Paper end sensor

Platen open lever

FTP-639MCL064/113/364/393-R

FTP-639MCL393R

Unit: mm

6

FTP-639MCL064/113/364/393-R

C 6 D O

V-

V-

D I

oN langiS O/I stnetnoC oN langiS O/I stnetnoC

1 WS O hctiwsneponetalP 2 WS - hctiwsneponetalP

3 HV I daehlamrehtrofrewoP 4 I daehlamrehtrofrewoP

5 HV I daehlamrehtrofrewoP 6 I daehlamrehtrofrewoP

7 I niataD 8 2BTS I 2elbanetnirP

9 CN - detcennoctoN 01 DDV - cigolrofrewoP

11 MT - rotsimrehTdaeH 21 DNG - DNGdaeH

31 DNG - DNGdaeH 41 DNG - DNGdaeH

51 DNG - DNGdaeH 61 DNG - DNGdaeH

71 DNG - DNGdaeH 81 DNG - DNGdaeH

91 DNG - DNGdaeH 02 DNG - DNGdaeH

12 HT O rotsimrehT 22 1BTS I 1elbanetnirP

32 CN - detcennoctoN 42 TAL I hctalatadtnirP

52 KLC I kcol 2 O tuoataD

72 HV I daehlamrehtrofrewoP 82 HV I daehlamrehtrofrewoP

92 HV I daehlamrehtrofrewoP 03 HV I - daehlamrehtrofrewoP

I A

I B

.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC

1 CN - detcennoctoN 2 MT O rosneserutarepmetrotoM

3 MT - rosneserutarepmetrotoM 4 ATM I /AnoitaticxeliocrotoM

5 T AM noitaticxeliocrotoM 6 BTM I /BnoitaticxeliocrotoM

7 T BM noitaticxeliocrotoM 8 KHP - edohtacrosnestuorepaP

9 NESV - rosnesrepaprofrewoP 01 EHP O rottimerosnestuorepaP

.oN langiS O/I stnetnoC .oN langiS O/I stnetnoC

1 1WS O hctiwsnoitisopemohrettuC 2 2WS O hctiwsnoitisopemohrettuC

3 +M O/I evirdrotomrettuC 4 -M O/I evirdrotomrettuC

n CONNECTOR PIN ASSIGNMENT OF PRINTER MECHANISM (FPC)

1. Thermal head control circuit side

Part number : 52610-3071 (Molex) or equivalent

2. Motor, Sensor (CN4)

Connector on circuit side : 52610-1071 (Molex) or equivalent

3. Cutter (CN5)

Connector type: B4B-PH (J.S.T.) or equivalent

n INTERFACE COMMAND OPTIONS

Please refer to the FTP-629DCL/DSL200 or FTP-629DSL300 series datasheet

7

FTP-639MCL064/113/364/393-R

Fujitsu Components International Headquarter Ofces

Japan

Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141 8630, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://us.fujitsu.com/components/

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: emea.fujitsu.com/components/

Asia Pacic

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://www.fujitsu.com/sg/services/micro/components/

©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.

Fujitsu Components America or its afliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its afliates reserve the right to change specications/datasheets without prior notice.

Rev. February 27, 2009.

8