FUJITSU FI-4110EOX2 User Manual
Color Image Scanner
fi-4110EOX2
Operator’s Guide
P3PC-E517-02EN
TM
INTRODUCTION
Thank you for purchasing the ScanSnap!TM fi-4110EOX2 Duplex Color Scanner product.
ScanSnap! fi-4110EOX2 comes with a color image scanner and office applications. It is a complete Office Solution designed to improve your productivity and to solve your office scanning
problems. ScanSnap! product has the following features.
■ Just pressing the Scanner button allows you to turn images on paper into PDFs!
You can turn the documents that clutter up your desktop into PDFs, and manage and
archive them on your computer. You can use the Adobe®
with this scanner to display and these PDF documents.
ScanSnap! product can also automatically recognize the type of document, color or
black & white, so scanned image files can be made smaller when scanning documents
containing a mixture of color and black & white pages. You can also have the scanner
automatically remove blank pages in documents in order to reduce the size of files even
more.
Acrobat® software packaged
■ Effortless scanning!
Double-sided color documents A4 or Letter in size can be scanned at a speed of about
15 sheets/minute. (when Scan mode is set to Normal, Color mode is set to Auto, and
Compression rate is set to3)
■ Small desktop footprint!
Smaller than a sheet of A4 or letter paper in size, ScanSnap! scanner can be left on your
desk all the time.
■ Business cards easily filed!
Business cards can be easily filed and searched for using the OCR function by using the
"CardMinder
This document describes how to handle ScanSnap! fi-4110EOX2 and basic operation methods.
Before you start using ScanSnap!, fi-4110EOX2 be sure to thoroughly read this manual to ensure
correct use.
ScanSnap! fi-4110EOX2 is referred to as ScanSnap! hereafter in this document.
TM
" software supplied with the scanner.
ScanSnap! fi-4110EOX2 Operator's Guide i
CONTENTS
■ Regulatory Information ......................................................... v
■ Note, Liability ...................................................................... viii
■ Preface ................................................................................ viii
■ Safety Precautions ............................................................... xi
Chapter1 BEFORE YOU START USING YOUR SCANNER ...1
1.1 Checking the Contents of the Scanner Package............. 2
1.2 Names and Functions of Parts .......................................... 3
Front Side ............................................................................................. 3
Rear Side.............................................................................................. 3
Chapter2 CONNECTING ScanSnap!....................................... 5
2.1 Installing ScanSnap! .......................................................... 6
Before Installing ScanSnap!.................................................................. 6
Installing Adobe® Acrobat®.................................................................. 7
Installing Supplied Programs (ScanSnap! Driver and CardMinder)...... 9
2.2 Connecting Your Computer to ScanSnap!..................... 15
Connecting the AC Adapter ................................................................ 15
Connecting the USB Cable................................................................. 16
Chapter3 BASIC SCANNER OPERATIONS.......................... 19
3.1 Flow of Operations ........................................................... 20
3.2 Scanning Different Document Types.............................. 22
3.3 Loading Documents ......................................................... 24
ii
3.4 Scanning Documents ....................................................... 27
3.5 Changing Scan Settings .................................................. 30
3.6 Scanning Business Cards ............................................... 45
Scanning business cards.................................................................... 45
3.7 Viewing PDF File Thumbnails.......................................... 48
Start PDF File Thumbnail View........................................................... 48
Display thumbnails of PDF files .......................................................... 49
Chapter4 Uninstalling ScanSnap! ........................................ 51
4.1 Uninstalling Supplied Programs (ScanSnap! Driver and
CardMinder)52
Chapter5 TROUBLESHOOTING............................................ 55
5.1 Clearing Document Jams................................................. 56
5.2 Troubleshooting Checklist .............................................. 58
5.3 Replacing Consumables .................................................. 60
Part Nos. and Replacement Cycle of Consumables........................... 60
Replacing the Pad ASSY.................................................................... 62
Replacing the Pick Roller.................................................................... 65
Chapter6 DAILY CARE .......................................................... 69
6.1 Cleaning Materials............................................................ 70
6.2 Cleaning the Scanner Exterior and ADF paper chute ... 71
6.3 Cleaning the ADF.............................................................. 72
APPENDIX A Installation Specifications ............................................... 75
INDEX .......................................................................................................... 77
ScanSnap! fi-4110EOX2 Operator's Guide iii
REPAIRS ..................................................................................................... 79
iv
■ Regulatory Information
FCC declaration
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
located.
•Consult your dealer or an experienced radio/TV technician.
FCC warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ATTENTION
• The use of a shielded interface cable is required to comply with the Class B
limits of Part 15 of FCC rules.
• The length of the AC cable must be 3 meters (10 feet) or less.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B limit for radio noise emissions from
digital apparatus set out in the Radio interference Regulations of the Canadian Department
of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Le pésent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescridtes dans le Réglesment sur le
brouillage radioélectrique dicté par le ministere des Communications du Canada.
Cet appareil numérique de la classe B est conformme à la norme NMB-003 du Canada.
ScanSnap! fi-4110EOX2 Operator's Guide v
Bescheimigung des Herstellers / Importeurs
Hiermit wird bescheinigt, daß der/dieldas
fi-4110EOX2
•In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört ist.
•Laut Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:Der höchste
Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß ISO/7779.
International ENERGY STAR® Program
As an ENERGY STAR® Partner, PFU LIMITED has determined that
this product meets the
efficiency.
The International
international program that promotes energy saving through the penetration of energy
efficient computers and other office equipment. The program backs the development and
dissemination of products with functions that effectively reduce energy consumption. It is an
open system in which business proprietors can participate voluntarily. The targeted products
are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and
ENERGY STAR® guidelines for energy
ENERGY STAR® Office Equipment Program is an
multifunction devices. Their standards and logos ( ) are uniform among participating
nations.
Use in High-safety Applications
This product has been designed and manufactured on the assumption that it will be used in
office, personal, domestic, regular industrial, and general-purpose applications. It has not
been designed and manufactured for use in applications (simply called "high-safety
applications" from here on) that directly involve danger to life and health when a high degree
of safety is required, for example, in the control of nuclear reactions at nuclear power
facilities, automatic flight control of aircraft, air traffic control, operation control in masstransport systems, medical equipment for sustaining life, and missile firing control in
weapons systems, and when provisionally the safety in question is not ensured. The user
should use this product with adopting measures for ensuring safety in such high-safety
applications. PFU LIMITED assumes no liability whatsoever for damages arising from use
of this product by the user in high-safety applications, and for any claims or compensation
for damages by the user or a third party.
vi
About the use of mercury
The scanner lamp contains mercury.
To avoid unexpected injury, read the following carefully.
Doing the following actions may result in serious personal injuries:
•Do not put the substance in the lamp in your mouth as it contains mercury.
•Do not incinerate, crush, or shred the scanner.
•Do not breathe the chemical liquid contained in the scanner parts.
Disposing of the scanner should be conducted as required by local ordinances or regulations.
Trademarks
ScanSnap!, ScanSnap! logo, and CardMinder are the trademarks of PFU LIMITED.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Other product names are the trademarks or registered trademarks of the respective
companies.
How Trademarks Are Indicated In This Manual
CardMinder: CardMinderTM for ScanSnap!.
References to operating systems (OS) are indicated as follows:
®
Windows
Windows
Windows
Windows
Where there is no distinction between the different versions of the above operating system,
the general term "Windows " is used.
98: Microsoft® Windows® 98 operating system.
®
Me: Microsoft® Windows® Millennium Edition operating system.
®
2000: Microsoft® Windows® 2000 Professional operating system.
®
XP: Microsoft® Windows® XP Professional operating system,
®
Microsoft
Windows® XP Home Edition operating system.
Manufacturer
PFU LIMITED
Image Products Sales Dept., Imaging Products Division, Products Group
Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563,
Japan
Phone : (81-44) 540-4538
All Rights Reserved, Copyright© PFU LIMITED 2003.
ScanSnap! fi-4110EOX2 Operator's Guide vii
■ Note, Liability
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF
THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE
CAUSED TO USERS OR BYSTANDERS.
While all efforts have been made to ensure the accuracy of all information in this manual,
PFU assumes no liability to any party for any damage caused by errors or omissions or by
statements of any kind in this manual, its updates or supplements, whether such errors are
omissions or statements resulting from negligence, accidents, or any other cause. PFU
further assumes no liability arising from the application or use of any product or system
described herein; nor any liability for incidental or consequential damages arising from the
use of this manual. PFU disclaims all warranties regarding the information contained herein,
whether expressed, implied, or statutory.
■ Preface
Safety Precautions
This manual describes important details for ensuring the safe and correct use of this product.
Thoroughly read this manual before you start to use this product. In particular, be sure to
read and fully understand the Safety Precautions described in this manual before you use this
product.
Also, store this manual in a safe place so that it can be easily referred to during use of this
product.
Warning Indications Used In This Manual
This manual uses the following indications to ensure safe and correct use of this product, and
to prevent possible danger and injury to the operator and other persons.
This indication alerts operators to an operation that, if not strictly
WARNING
This indication alerts operators to an operation that, if not strictly observed, may
result in safety hazards to personnel or damage to equipment.
observed, may result in severe injury or death.
viii
Symbols Used In This Manual
This manual uses the following symbols in explanations in addition to warning indications.
ATTENTION
HINT
This symbol alerts operators to particularly important information. Be sure to
read this information.
This symbol alerts operators to helpful advice regarding operation.
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not perform.
The drawing inside or under the circle shows the specific action that is not
allowed.
R
Outline characters on a colored background show instructions users should follow.
It may also include the drawing that shows the specific instruction.
ScanSnap! fi-4110EOX2 Operator's Guide ix
Screen Examples In This Manual
The screen examples in this manual are subject to change without notice in the interest of
product improvement.
If the actual displayed screen differs from the screen examples in this manual, operate by
following the actual displayed screen while referring to the User's Manual of the scanner
application you are using.
Furthermore, the screenshots in this manual are for the ScanSnap! Driver and the
CardMinder application.
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an authorized FUJITSU Image
Scanner service provider to make repairs to this product.
x
■ Safety Precautions
WARNING
The following describes important warnings described in this manual.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so might cause electric
shock.
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or
modify AC cables.
Also, do not use damaged AC cables or power plugs, and AC cables or power
plugs when the wall socket is loose.
Use only specified AC cables and connector cables
Use only specified AC cables and connector cables. Failure to use the correct
cables might cause electric shock and equipment failure.
Use this scanner only at the indicated power voltage. Do not
connect to multiple-power strips.
Use this scanner only at the indicated power voltage and current. Improper
power voltage and current might cause fire or electric shock.
Also, do not connect to multiple-power strips.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the power plug or metal fittings with a soft,
dry cloth. Accumulated dust might cause fire or electric shock.
ScanSnap! fi-4110EOX2 Operator's Guide xi
Do not install in locations subject to oil smoke, steam, humidity,
and dust.
Do not install the scanner in locations subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or electric shock.
Do not use the scanner if you smell strange odor.
If you detect heat coming from the device or detect other problems such as
smoke, strange smells or noises, immediately turn off the scanner and then
disconnect its power plug.
Make sure that the smoking has stopped, and then contact the store where you
bought the scanner or an authorized FUJITSU scanner service provider.
Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn off the scanner and unplug the
power cable before contacting the store where you purchased the scanner.
Do not put liquids inside the scanner.
Do not insert or drop metal objects in to the scanner.
Do not scan wet documents or documents with paper clips or staples.
Do not splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner,
immediately turn off the scanner and disconnect the power plug from the power
outlet, then contact the store where you bought the scanner or the Maintenance
Service Center.
Pay particular attention to this warning in households where there are small children.
xii
Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner contains highvoltage components. Touching these components might cause fire or electric
shock.
The following describes important cautions described in this manual.
Do not install the scanner on unstable surfaces.
Install the scanner on a desk so that none of its parts protrude outside of the
desktop. Also, make sure that the scanner is installed on a flat, level surface.
Do not install the scanner on unstable surfaces. Install the scanner on a level
surface that is free of vibration to prevent it from falling.
Install the scanner on a strong surface that will support the weight of the
scsanner and other devices.
Firmly insert the power plug.
Firmly insert the power plug into the power outlet as far it can go.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking the ventilation ports generates heat
inside of scanner, which may results in fire or scanner failure.
Do not place heavy objects or climb on top of the scanner.
Do not place heavy objects on the scanner or use the scanner's top surface for
performing other work. Improper installation might cause injuries.
ScanSnap! fi-4110EOX2 Operator's Guide xiii
Before moving the scanner, disconnect the power plug from the
power outlet.
Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect data cables. Also, make sure that the floor is free of
obstructions.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Avoid any contact when scanner is in use.
Avoid touching any scanner mechanism when scanning as this may cause
injuries.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
When the scanner is not used for a long period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight.
Do not install the scanner in the direct sunlight or near heating apparatus. Doing
so might cause excessive heat to build up inside the scanner, causing fire or
scanner trouble. Install the scanner in a well-ventilated location.
xiv
Chapter1
BEFORE YOU START USING YOUR
SCANNER
This chapter describes preparations you must perform before you start using ScanSnap! product.
1
1.1 Checking the Contents of the Scanner Package ................................................. 2
1.2 Names and Functions of Parts .............................................................................. 3
ScanSnap! fi-4110EOX2 Operator's Guide 1
1.1 Checking the Contents of the Scanner Package
When you unpack the scanner package, make sure that all of the parts are included in the package.
2
1.2 Names and Functions of Parts
1.2 Names and Functions of Parts
This section describes the names of parts and their functions.
■ Front Side
Stacker
Align the stacker with
both edges at the
bottom of the scanner,
and firmly insert as far
as possible.
Duplex
Press this button to
scan both sides of
a document.
Simplex
Press this button to
scan one side of a
document.
1
BEFORE YOU START USING YOUR SCANNER
Pick arm
■ Rear Side
LED
This LED lights when the scanner is
ready.
During scanning, this LED blinks.
Cover open lever
AC adapter connector
USB connector
Operation panel
ADF paper chute
Insert the claws of the ADF
paper chute into the holes at
the top of the scanner body at
an angle as shown in the
figure so that the ADF paper
chute reclines towards the
rear of the scanner.
Seal
ScanSnap! fi-4110EOX2 Operator's Guide 3
4
Chapter2
CONNECTING ScanSnap!
This chapter describes how to connect ScanSnap! product to your personal computer.
®
Before you connect ScanSnap! scanner, install the supplied programs (Adobe
CardMinder and ScanSnap! Driver) on your personal computer.
ATTENTION
For details on access space required when installing your scanner, refer to Appendix "Installation
Specifications" (page. 75).
First, install ScanSnap! Driver, and then connect ScanSnap! to your personal
computer.
If you connect ScanSnap! before installing ScanSnap! Driver, ScanSnap! will
not operate normally.
Also, if an older version of ScanSnap! Driver is installed on the personal computer you are using, first uninstall the older version, restart your personal computer, and install the latest version of ScanSnap! Driver.
* If you have connected ScanSnap! beforehand, the "Found New Hardware
Wizard" (the screen title differs slightly according to the OS running on your
personal computer) screen is displayed. If this screen is displayed, click the
[Cancel] button to close the Wizard screen, and first install ScanSnap! Driver.
Acrobat®,
2
In this chapter, the following abbreviations mean the following:
Windows
Windows
Windows
Windows
2.1 Installing ScanSnap!............................................................................................... 6
2.2 Connecting Your Computer to ScanSnap!......................................................... 15
®
98 : Microsoft® Windows® 98 operating system operating system
®
Me : Microsoft® Windows® Millennium Edition operating system
®
2000 : Microsoft® Windows® 2000 Professional operating system
®
XP : Microsoft® Windows® XP Professional operating system,
Microsoft
®
Windows® XP Home Edition operating system
ScanSnap! fi-4110EOX2 Operator's Guide 5
2.1 Installing ScanSnap!
"Installation" is the operation of copying the program files supplied with ScanSnap! to the hard
disk of the personal computer you are using, and creating the environment for using ScanSnap! on
the personal computer on which the ScanSnap! program files are installed.
■ Before Installing ScanSnap!
Make the following preparations before you install ScanSnap!.
1. Check the system.
ScanSnap! runs on the following system:
■ Personal computer
®
• Intel
• CD-ROM drive (required for installation)
• USB port
Pentium®III processor, clock speed 600 MHz or higher is recommended as the
CPU.
ATTENTION
v
ScanSnap! sometimes does not function if the USB port on the keyboard or
monitor is used.
If you are using a commercially available USB hub, use a type that has an AC
adapter.
■ Operating system
• Windows
• Windows
• Windows
• Windows
®
98
®
Me
®
2000
®
XP or one of the above
■ RAM
64 Mbytes or more (128 Mbytes or more recommended)
■ Free disk space
• ScanSnap! Driver 10 Mbytes
• CardMinder
TM
100 Mbytes
2. Make sure that ScanSnap! is disconnected from your personal computer.
3. Start up your personal computer.
®
When using Windows
privileges (computer administrator privileges in the case of Microsoft
2000 or Windows® XP, log in as a user having "Administrator"
®
Windows® XP
Home Edition operation system).
6
4. Exit all currently running programs.
2.1 Installing ScanSnap!
■ Installing Adobe® Acrobat
Install Adobe® Acrobat® by the following procedure from the "Adobe® Acrobat® 5.0 CD-ROM"
supplied with the scanner.
HINT
Operation
Adobe® Acrobat® is required for displaying "ScanSnap! fi-4110EOX2 Operator’s Guide" and "CardMinder User’s Guide."
®
Adobe
displayed.
* Adobe
sonal computer.
Acrobat® can also be linked to ScanSnap! so that scanned images are
®
Acrobat® need not be installed if it is already installed on your per-
⇒ Proceed to "Installing Supplied Programs (ScanSnap! Driver and CardMin-
der)" (page. 9).
®
2
CONNECTING ScanSnap!
1. Insert the Adobe® Acrobat® 5.0 CD-ROM into the CD-ROM drive.
⇒ The CD-ROM is automatically recognized, and the "Adobe Acrobat 5.0 AutoPlay"
screen is displayed.
If the "Adobe Acrobat 5.0 AutoPlay" screen is not displayed even after the
HINT
®
Adobe
the "AutoPlay.exe" icon at the CD-ROM drive in Explorer.
Acrobat® 5.0 CD-ROM is inserted into the CD-ROM drive, double-click
ScanSnap! fi-4110EOX2 Operator's Guide 7
2. The following screen is displayed. Click the [Next] button.
3. The following screen is displayed. Click the [Acrobat 5.0] button, and click the [Install
Adobe Acrobat 5.0] button shown below.
4. The setup screen is displayed. Install Adobe
®
Acrobat® by following the on-screen
instructions.
HINT
For details on installation of Adobe® Acrobat® 5.0, read the description that is
displayed by clicking the [Before you install] button in the screen at Operation
3.
For details on how to use Adobe
Help."
®
Acrobat® 5.0, refer to "Adobe® Acrobat® 5.0
8
2.1 Installing ScanSnap!
■ Installing Supplied Programs (ScanSnap! Driver and CardMinder)
Install supplied programs for ScanSnap! from the "Setup CD-ROM" supplied with the scanner.
Operation
1. Insert the Setup CD-ROM for the scanner into the CD-ROM drive.
⇒ The "ScanSnap! Installer" starts up, and the "ScanSnap! Setup" dialog box is displayed.
2
CONNECTING ScanSnap!
HINT
If the Main menu" dialog box is not displayed even though the Setup CD-ROM
is inserted in the CD-ROM drive, double-click the "Setup.exe" icon at the CDROM drive in which the Setup CD-ROM is inserted using Explorer, and start up
"ScanSnap! Installer".
ScanSnap! fi-4110EOX2 Operator's Guide 9
2. Click the [Show Readme] button in the "ScanSnap! Setup" dialog box.
This item describes the precautions to follow when installing and uninstalling ScanSnap!,
structure of files in the Setup CD-ROM, and other information.
When you have finished reading this description, close the screen.
3. Click the [Install Products] button in the "ScanSnap! Setup" dialog box.
10
⇒ "Welcome to the InstallShield Wizard for ScanSnap!" screen is displayed.
2.1 Installing ScanSnap!
4. Click the [Next] button in the "Welcome to the InstallShield Wizard for the ScanSnap!"
⇒ The "License Agreement" screen is displayed.
5. Check the details of the "License Agreement." If you agree with the details, click the
[Yes] button.
If you do not agree with the details, click the [No] button. This cancels the installation.
2
CONNECTING ScanSnap!
⇒ When you click the [Yes] button, the "Choose Destination Location" screen is displayed.
6. In the "Choose Destination Location" screen, check the installation directory, and click
the [Next] button.
To install ScanSnap! in the displayed folder, click the [Next] button.
Normally, there is no need to change the folder in the installation directory. Change the
installation directory when there is not enough free disk space at the drive where the installation folder is located.
To change the folder to install ScanSnap! to, click the [Browse...] button. The "Select Directory" dialog box is displayed. Select the folder to install ScanSnap! to.
ScanSnap! fi-4110EOX2 Operator's Guide 11
⇒ The "Setup Type" screen is displayed.
7. Select the programs you want to install in the “Setup Type” screen.
■ Typical
Installs both ScanSnap! Driver and CardMinder programs.
■ Compact
Installs only the ScanSnap! Driver program.
■ Custom
Select ScanSnap! Driver and CardMinder to install them.
Select Typical and then click the [Next] button.
12
⇒ This displays the "Start Copying Files" screen.
2.1 Installing ScanSnap!
8. In the "Start Copying Files" screen, check the files that will be installed, and click the
[Next] button.
⇒ This starts installation of ScanSnap! supplied programs. When installation ends, the
"InstallShield Wizard Complete" screen is displayed.
2
CONNECTING ScanSnap!
9. In the "InstallShield Wizard Complete"screen, click [Finish] button.
⇒ If you selected "Yes, I want to restart my computer now", your computer will be
restarted.
⇒ If you selected "No, I will restart my computer later.", The "ScanSnap! Setup" dialog box
will be displayed. Click the [Exit] button to close the "ScanSnap! Setup" dialog box
To exit the Installer, you must restart your computer.
ScanSnap! fi-4110EOX2 Operator's Guide 13
HINT
To display the "ScanSnap! fi-4110EOX2 Operator’s Guide" and "CardMinderTM
®
User’s Guide," Adobe
Acrobat® or Adobe® Acrobat® ReaderTM is required. If
this software is not installed on the personal computer you are using, install
Acrobat
®
5.0 from the "Adobe® Acrobat® 5.0 CD-ROM" supplied with the scan-
ner.
14
Loading...