Fujitsu BX920 S1 User Manual
PRIMERGY
BX920 S1
PRIMERGY BX920 S1
- All-around blade server packs lots of
computing power in a small form factor.
Fujitsu PRIMERGY BX blade servers are the ideal choice for data center
solutions today and tomorrow. Fujitsu blade servers provide maximum
performance and maximum redundancy.
Key Features
of this Server:
Powerful Intel® Dual and
Quad-Core™ Xeon® 5500
series processors
Memory high availability
with hot spare memory
or mirroring support
Up to 72 GB of DDR3-RAM
Minimum space
requirements
Low power consumption
Direct connections
to reduce cabling
Integrated Remote
Management Controller
(iRMC) providing advanced
management features
PRIMERGY BX920 S1
The PRIMERGY BX920 S1 blade server uses Intel®
5500 processors, their newest and most powerful
member of the Xeon
architecture and dedicated on-chip memory controllers,
®
the Intel
Xeon® 5500 series processors easily exceed
the capacities of any prior generation. The BX920 S1
blade server can host two of these processors, up to
two hard drives, 72 GB of DDR3 memory, and two
integrated dual-channel Intel 82575 Gbit Ethernet
controllers. In addition, the BX920 S1 can host two
mezzanine daughter cards, offering a choice of
additional Gbit links, 10Gbit, Fibre Channel, or
Infiniband connectivity. The BX920 S1 is ideal for
virtualization using hypervisors such as VMware
ESXi, Microsoft Hyper-V™, or Citrix XenServer™,
and can provide a class-leading twelve physical
Gbit Ethernet connections per server blade.
PRIMERGY BX920 S1 blades are equipped with our
state-of-the-art Integrated Remote Management
Controller (iRMC S2); and combined with their wide
range of processor, disk, and memory options,
provides IT managers the performance and scalability
they need for any data center application.
®
family. Utilizing QuickPath
®
MAIN FEATURES
Performance: Two Intel® Xeon® 5500 series Dual,
Quad and Turbo Quad-Core processors with Turbo
Boost technology, demand-based switching, QuickPath
Interconnect (QPI) and on-chip memory management
unit. The Intel
BX920 S1 with up to 25 GB per second (GB/s)
bandwidth between processors, processors and
memory, and processors and I/O hub.
Benefits
Tunable performance in a consistent power and
thermal envelope.
Management: The Integrated Remote Management
Controller (iRMC S2) enables extensive individual server
access and control, even at remote locations. The
embedded Pre-Failure Detection and Analysis function
provides reliable operations in any circumstances.
Benefits
Easy and reliable management and control.
Virtualization: Multiple-server boot options, including
local disk, via the network, or USB solid state disk
makes this server ideal for any application. It is an
excellent platform for both virtualized and physical
deployments.
Benefits
Versatile operations.
Connectivity: Two integrated dual-channel Intel
82575 Gbit Ethernet controllers are standard. Two
PCI Express 2.0 mezzanine slots hosting a combination of quad-Gbit Ethernet, dual 8Gbit fibre channel,
dual-channel 10Gbit Ethernet, and dual-channel DDR
or QDR Infiniband provide superb connectivity via a
state-of-the-art high-performance midplane.
Benefits
Excellent I/O connectivity.
®
QuickPath architecture provides the
®
PRIMERGY BX920 S1
SPECIFICATIONS
TECHNICAL DETAILS
Main Board Main board Type D 2860
Chipset Intel
Processor Quantity
and Type 1 - 2 x Intel
Processor Options Intel
800 MHz, 80 W)
Intel
800 MHz, 80 W)
Intel
800 MHz, 80 W)
1066 MHz, 80 W)
Intel® Xeon® E5530 (4C, 2.40 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
1066 MHz, 80 W)
Intel® Xeon® E5540 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
1066 MHz, 80 W)
Intel
1333 MHz, 95 W)
Intel
1333 MHz, 95 W)
Intel
1333 MHz, 95 W) Intel
Turbo: No, 4.8 GT/s, 60 W)
Intel
Memory Slots 9 (6 slots on CPU 1, 3 slots on CPU 2)
Memory Slot Type DIMM (DDR3)
Memory Capacity
(Min. - Max.) 2 GB - 72 GB
Memory Protection Advanced ECC memory scrubbing
SDDC (ChipKill™)
Memory mirroring support
Memory Modules 1 GB (1 module(s) with 1 GB) DDR3, unbuffered, ECC, 1066 MHz, PC3-8500
Independent Mode 2 GB (1 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
2 GB (1 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
2 GB (1 module(s) with 2 GB) DDR3, unbuffered, ECC, 1066 MHz, PC3-8500
4 GB (1 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
4 GB (1 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
8 GB (1 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
8 GB (1 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
Memory Modules 4 GB (2 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
Mirrored Mode 4 GB (2 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
(Two Identical 8 GB (2 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
Modules per Bank) 8 GB (2 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
16 GB (2 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
16 GB (2 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
Memory Modules
Spare-Performance
Mode (Three
Identical Modules
per Bank)
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
24 GB (3 module(s) with 8 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
Interfaces USB Ports 4 x USB at the front via special cable
Graphics (15-Pin) 1 x VGA at the front via special cable
Serial Connection 1 x RS232 (9-pin) at the front via special cable
LAN / Ethernet (RJ-45) 4 x Gbit Ethernet via midplane at Ethernet connection blade
Service LAN (RJ45) Service LAN traffic can be switched to shared onboard Gb LAN port
®
5520
®
Xeon® processor 5500 series
®
Xeon® E5502 (2C, 1.86 GHz, SLC: 2 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
®
Xeon® E5504 (4C, 2.00 GHz, SLC: 4 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
®
Xeon® E5506 (4C, 2.13 GHz, SLC: 4 x 256 KB , TLC: 4 MB , Turbo: No, 4.8 GT/s, Mem bus:
Intel® Xeon® E5520 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, Mem bus:
®
Xeon® X5550 (4C, 2.66 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
®
Xeon® X5560 (4C, 2.80 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
®
Xeon® X5570 (4C, 2.93 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 6.4 GT/s, Mem bus:
®
Xeon® L5520 (4C, 2.26 GHz, SLC: 4 x 256 KB , TLC: 8 MB , Turbo: Yes, 5.86 GT/s, 60 W)
®
Xeon® L5506 (4C, 2.13 GHz, SLC: 4 x 256 KB , TLC: 4 MB ,
6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
6 GB (3 module(s) with 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500
12 GB (3 module(s) with 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600
Loading...