Fujitsu AOU24RL Installation Manual

MANUAL DE FUNCIONAMIENTO

HEAT&COOLING MODEL (REVERSE CYCLE)

ROOM AIR CONDITIONER

WALL MOUNTED TYPE

Indoor Unit

OPERATING MANUAL

MODE D’EMPLOI

ASU24RL

Outdoor Unit

AOU24RL

English

Français

Español

KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE

FUJITSU GENERAL LIMITED

P/N9315345028-01

CONTENTS

SAFETY PRECAUTIONS .................................... En-1

FEATURES AND FUNCTIONS ........................... En-2

NAME OF PARTS ................................................ En-3

PREPARATION .................................................... En-4

OPERATION ........................................................ En-5

TIMER OPERATION ............................................ En-7

SLEEP TIMER OPERATION ................................ En-8

MANUAL AUTO OPERATION ............................ En-8

SAFETY PRECAUTIONS

DANGER!

● Do not attempt to install this air conditioner by yourself.

● This unit contains no user-serviceable parts. Always consult authorized service per-

sonnel for repairs.

● When moving, consult authorized service personnel for disconnection and installation of the unit.

● Do not become excessively chilled by staying for lengthy periods in the direct cooling airflow.

● Do not insert fingers or objects into the outlet port or intake grilles.

● Do not start and stop air conditioner operation by disconnecting the power supply

cord and so on.

● Take care not to damage the power supply cord.

● In the event of a malfunction (burning smell, etc.), immediately stop operation, dis-

connect the power supply plug, and consult authorized service personnel.

ADJUSTING THE DIRECTION OF

AIR CIRCULATION .............................................. En-9

SWING OPERATION......................................... En-10

COIL DRY OPERATION ..................................... En-10

CLEANING AND CARE ..................................... En-11

TROUBLESHOOTING ....................................... En-13

OPERATING TIPS.............................................. En-14

CAUTION!

● Provide occasional ventilation during use.

● Do not direct air flow at fireplaces or heating apparatus.

● Do not climb on, or place objects on, the air conditioner.

● Do not hang objects from the indoor unit.

● Do not set flower vases or water containers on top of air conditioners.

● Do not expose the air conditioner directly to water.

● Do not operate the air conditioner with wet hands.

● Do not pull power supply cord.

● Turn off power source when not using the unit for extended periods.

● Check the condition of the installation stand for damage.

● Do not place animals or plants in the direct path of the air flow.

● Do not drink the water drained from the air conditioner.

● Do not use in applications involving the storage of foods, plants or animals, precision

equipment, or art works.

● Connection valves become hot during Heating; handle with care.

● Do not apply any heavy pressure to radiator fins.

● Operate only with air filters installed.

● Do not block or cover the intake grille and outlet port.

● Ensure that any electronic equipment is at least one metre away from either the in-

door or outdoor units.

● Avoid installing the air conditioner near a fireplace or other heating apparatus.

● When installing the indoor and outdoor unit, take precautions to prevent access to

infants.

● Do not use inflammable gases near the air conditioner.

En-1

Fig. 1

Ջࣱݻବ

MANUAL

AUTO

Fig. 5

Fig. 6

L M

O X

B C

Q R S

V P W

Fig. 2

OPERATION

TIMER

COIL DRY

Fig. 3

Fig. 4

b c

Fig. 7

To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actral operation, however, the display will only show those indicators appropriate to the current operation.

5 6 7

]

[

WIRED REMOTE CONTROL UNIT (OPTION)

The optional wired remote control unit (model No.: UTB-UUB) can be used. When you use wired remote control unit, there are following different points as compared with using wireless remote control unit.

[The additional functions for wired ones]

• Weekly timer

• Temperature set back timer [The restricted functions for wired ones]

• QUIET can't be selected in FAN MODE.

• Sleep-timer can't be used.

• Coil dry can’t be used. And you can't use both wired remote control unit and wireless simultaneously.

(Only one kind can be selected)

TYPE HEAT & COOL MODEL TYPE MODÈLE RÉVERSIBLE TIPO MODELO DE REFRIGERACIÓN Y CAlEFACCÓN

MODEL MODÈLE MODELO

INDOOR UNIT UNIDAD INTERIOR UNITÉ INTÉRIEURE

OUTDOOR UNIT UNIDAD EXTERIOR UNITÉ EXTÉRIEURE

ASU24RL

AOU24RL

SPECIFICATIONS

POWER SUPPLY ........................................................................................................................................................................................................................................................ 208/230 V~60 Hz

COOLING

CAPACITY ..................................................................................................................................................................................................................................................................

INPUT POWER ...................................................................................................................................................................................................................................................................

CURRENT ..............................................................................................................................................................................................................................................................................10.1 A

HEATING

24,200 BTU/h

2.31 kW

27,600 BTU/h

2.47 kW

FICHE TECHNIQUE

ALIMENTATION......................................................................................................................................................................................................................................................... 208/230 V~60 Hz

REFROIDISSEMENT

PUISSANCE FRIGORIFIQUE .....................................................................................................................................................................................................................................

PUISSANCE ABSORBÉE ....................................................................................................................................................................................................................................................

INTENSITÉ ............................................................................................................................................................................................................................................................................ 10,1 A

CHAUFFAGE

INTENSITE ............................................................................................................................................................................................................................................................................ 10,8 A

24,200 BTU/h

2,31

27,600 BTU/h

2,47 kW

ESPECIFICACIONES

ALIMENTACIÓN ........................................................................................................................................................................................................................................................ 208/230 V~60 Hz

REFRIGERACIÓN

CAPACIDAD ...............................................................................................................................................................................................................................................................

ENTRADA DE ALIMENTACIÓN ........................................................................................................................................................................................................................................

CORRIENTE ...........................................................................................................................................................................................................................................................................10

CALEFACCIÓN

24,200 BTU/h

2,31

kW ,

1 A

27,600 BTU/h

47 kW

FEATURES AND FUNCTIONS

INVERTER

At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit automatically switches to a low power setting for economic and comfortable operation.

COIL DRY OPERATION

The Indoor unit can be dried by pressing the COIL DRY button on the Remote Control Unit so as to avoid going moldy and restrain the breed of bacterium.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched automatically to maintain the set temperature, and the temperature is kept constant at all times.

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON timer operations in a single sequence. The sequence can involve one transition from OFF timer to ON timer, or from ON timer to OFF timer, within a twenty-four hour period.

OMNI-DIRECTIONAL AIR FLOW (SWING OPERATION)

Three-dimensional control over air direction swing is possible through dual use of both an UP/DOWN air direction swing and RIGHT/LEFT air direction swing. Since UP/DOWN air direction flaps operate automatically according to the operating mode of the unit, it is possible to set air direction based on the operating mode.

REMOVABLE OPEN PANEL

The indoor unit’s Open Panel can be removed for easy cleaning and maintenance.

MILDEW-RESISTANT FILTER

The AIR FILTER has been treated to resist mildew growth, thus allowing cleaner use and easier care.

SUPER QUIET OPERATION

When the FAN CONTROL button is used to select QUIET, the unit begins super-quiet operation; the indoor unit’s airflow is reduced to produce quieter operation.

SLEEP TIMER

When the SLEEP button is pressed during Heating mode, the air conditioner’s thermostat setting is gradually lowered during the period of operation; during cooling mode, the thermostat setting is gradually raised during the period of operation. When the set time is reached, the unit automatically turns off.

WIRELESS REMOTE CONTROL UNIT

The Wireless Remote Control Unit allows convenient control of air conditioner operation.

HORIZONTAL AIRFLOW: COOLING/ DOWNWARD AIRFLOW: HEATING

For cooling, use horizontal airflow so the cool air does not blow directly on the occupants in the room. For heating, use downward airflow to send powerful, warm air to the floor and create a comfortable environment.

POLYPHENOL CATECHIN AIR CLEANING FILTER

The polyphenol catechin air cleaning filter uses static electricity to clean the air of fine particles and dust such as tobacco smoke and plant pollen that are too small to see. The filter contains catechin, which is highly effective against various bacteria by suppressing the growth of the bacteria adsorbed by the filter. Note that when the air cleaning filter is installed, the amount of air produced decreases, causing a slight decrease in the air conditioner's performance.

NEGATIVE AIR IONS DEODORIZING FILTER

It comprises pottery super micro particles, which can produce negative air ions having the effect of deodorizing and can absorb and remit the peculiar smell at home.

En-2

NAME OF PARTS

Fig. 1 Indoor Unit

1 Operating Control Panel (Fig. 2) 2 MANUAL AUTO button

●

When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced cooling operation will start.

● The forced cooling operation is used at the

time of installation. Only for authorized service personnel's use.

● When the forced cooling operation starts

by any chance, press the START/STOP button to stop the operation.

3 Indicator (Fig. 3) 4 Remote Control Signal Receiver 5 OPERATION Indicator Lamp (red) 6 TIMER Indicator Lamp (green)

●

If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (See Page 14 Auto Restart).

7 COIL DRY Indicator Lamp (orange)

8 Intake Grille (Fig. 4) 9 Front Panel 0 Air Filter A Air Flow Direction Louver B Power Diffuser C Right-Left Louver

(behind Air Flow Direction Louver)

D Drain Hose E Air Cleaning Filter

Fig. 5 Outdoor Unit

F Intake Port G Outlet Port H Pipe Unit I Drain port (bottom)

Fig. 6 Remote Control Unit

J SLEEP button K MASTER CONTROL button L SET TEMP. button (

/ )

M COIL DRY button N Signal Transmitter O TIMER MODE button P TIMER SET (

/ ) button

Q FAN CONTROL button R START/STOP button S SET button (Vertical) T SET button (Horizontal) U SWING button V RESET button W TEST RUN button

● This button is used when installing the conditioner, and should not be used under normal conditions, as it will cause the air conditioner’s thermostat function to operate incorrectly.

● If this button is pressed during normal operation, the unit will switch to test operation mode, and the Indoor Unit’s OPERATION Indicator Lamp and TIMER Indicator Lamp will begin to flash simultaneously.

● To stop the test operation mode, press the START/STOP button to stop the air conditioner.

X CLOCK ADJUST button Y Remote Control Unit Display (Fig. 7) Z Transmit Indicator [ Clock Display \ Operating Mode Display ] Timer Mode Display ` Fan Speed Display a Temperature SET Display b COIL DRY Display c SLEEP Display d SWING Display

● Refer to the folded out page on the cover.

En-3

+ 13 hidden pages

Fujitsu AOU24RL Installation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual