FujiFilm Z20fd User Manual
Quickstart
Quickstart
Camera Controls
Shutter button
Shooting indicator/
Self-timer lamp
Flash
ON/OFF switch/
Lens cover
FinePix Z20fd has internal memory that can store images
without Memory Card. Use a Memory Card (sold separately) when recording a large number of images.
BL00709-100(1) E
Picture Taking
A. Charging the Battery
1
Rechargeable Battery
NP-45
Battery Charger BC-45
2
Insert the battery into the
supplied BC-45 battery charger as shown, making sure
that the battery is in the correct orientation.
Connect the power cable and
plug the charger into a power
outlet. The red charging indicator will light. Charging is
complete when the charging
indicator turns o . A fully exhausted battery takes about
180 minutes to charge.
B. Inserting the Battery
Orange
stripe
Battery latch
C. Setting up the Camera
1
Open the lens cover completely to turn the
camera on.
A (movie recording) button
Lens
Speaker
Microphone
Battery latch
Memory card slot
Align the orange stripe on
the battery with the orange
battery latch and slide the
battery into the camera,
keeping the battery latch
pressed to the side. Con rm
that the battery is securely
latched.
W (Zoom out) button
DISP (Display)/
BACK button
Selector button
Monitor
Connector for
multi-connector
adapter
Tripod mount
Battery chamber
Refer to Owner’s Manual for more detailed instructions
4
POWER MANAGEMENT
POWER SAVE
PERFORMANCE UP
Power saving for longer
battery life
SET NO
q Press the selector up or down to highlight
one of the following options:
• POWER SAVE: Save battery power.
• PERFORMANCE UP
: Intelligent Face Detection turns on and LCD MODE is set to
STANDARD for improved display quality.
w Press MENU/OK.
D. Taking Pictures
1
Double
2
beep
Press halfway
3
Click
Press the rest of
the way down
Open the lens cover completely to turn the
camera on.
Press the shutter button down halfway to adjust the focus.
Smoothly press the shutter button the rest of
the way down to take the picture.
E. Viewing Pictures
1
Press the D button.
Indicator lamp
B (Intelligent Face
Detection) button
T (Zoom in) button
Infrared port
Strap eyelet
D (Playback) button
C (Picture stabilization
anti-blur) button
MENU/OK button
DC coupler cable cover
Battery-chamber cover
START MENU
2
SET NO
DATE / TIME NOT SET
3
MM/DD/YY 1/ 1 12
SET NO
1AG6P1P3927--
2010
2009
2008
2007
2006
q A language-selection dialog is displayed
the rst time the camera is turned on.
w Press the selector up, down, left, or right
to highlight a language.
e Press MENU/OK.
q Press the selector left or right to highlight
the year, month, day, hour, or minute and
:
AM
press up or down to change. To change
00
the order in which the year, month, and
day are displayed, highlight the date format and press the selector up or down.
w Press MENU/OK.
2
Press the selector right to view pictures in the
order recorded, left to view pictures in reverse
order.
How to insert a Memory Card.
Gold label
Gold contacts
Align the gold marking with the gold contact area, then insert an
xD-Picture Card or SD Memory Card completely.
Using Intelligent Face Detection
With Intelligent Face Detection, the subject’s face(s) is detected and focused on automatically, so you can take
a picture of people in most suitably lit conditions.
Intelligent Face Detection will even detect and focus on two faces on opposite sides of the frame, where ordinarily the background in the center of the frame would be focused. In addition, Intelligent Face Detection
AUTO
adjusts for the brightness of the faces.
Press B to zoom in on a face when playing back the image taken with Intelligent Face Detection.
Viewing Images on your PC
A. Installing Software
A. Installing Software
B. Connecting the Camera to your PC
B. Connecting the Camera to your PC
C. Saving the Images
C. Saving the Images
A. Installing Software
Do not connect the camera to your PC until the software installation is
completed.
1 Turn on your PC and start up Windows.
Users of Windows 2000 Professional or Windows XP or Windows Vista
should log in by using a system administrator account (e.g. “Administrator”).
2 Quit all other active applications until no applications are shown in
the taskbar.
3 Load the enclosed CD-ROM into the CD-ROM drive. The installer starts
up automatically. For Windows Vista users: When loading the bundled
CD-ROM on your PC, the “AutoPlay” window may appear. In this case,
click “SETUP.exe”. When “User Account Control” window appears, click
“Allow”.
4 The Setup screen appears.Click the In-
stalling FinePixViewer button.
5 After installation completed, press Restart button.
B. Connecting the Camera to your PC
1 Insert the Memory Card with images into the camera.
2 Connect the camera to your PC using the USB cable (included).
Windows 2000 Professional
4
FinePixViewer starts up automatically.
Windows XP/Vista
The “Found New Hardware” help message appears in the bottom-right
corner of your screen. This message will close when the settings are completed. No action is required.
FinePixViewer starts up automatically.
C. Saving the Images
1 The Save Image Wizard starts up. Click the Start button.
2 Check that the les are downloaded from the camera to your PC and
that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2008_0801
D. Viewing the Images
1 Click the Show List of Images button.
3 Press D for about 1 second to turn the camera on in Playback mode.
2
Select “Preview” in the View menu to display an enlarged image.
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or “Software Installation”
in the Owner’s Manual, or visit Fuji lm “Q&A Search” in the following website.
(http://www.fujifilm.com/products/digital_cameras/index.html)
For Macintosh users, refer to “Software Installation” in the Owner’s Manual.
Loading...