Fujifilm FINEPIX S3100, FINEPIX S3500 User Manual

3

S3100

S3100

S3500

FGS-406106-Ni

BL00405-100(1

)

E

Camera Controls

Picture Taking

Refer to Owner’s Manual for more detailed instructions

Still images that can be viewed on the FinePix S3100/FinePix S3500

You can use this camera to view still images recorded on the FinePix
S3100/FinePix S3500 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.

A. Loading the batteries

01

01

02 03

1. Check that the camera is turned off (indicator lamp is off)
before opening the battery cover.

2. Load the batteries correctly as shown.

3. Press on the battery cover to push the batteries down.
Slide the cover closed.

1. Align the indicators on the

xD-Picture Card slot and
xD-Picture Card and then
push the card firmly all the
way into the slot.
Close the slot cover.

Press “d” or “c” to select the date order.

3. You can select your
preferred date format.
Press “d” or “c” to select
the date order, Year, Month,
Day, Hour or Minute.
Press “a” or “b” to correct
the setting.
Press the “MENU/OK”
button after you complete
the setting.

*

Refer to owner’s manual
for date/time setup.

B. Setting up the camera

2. To turn the camera on, set
the Power switch to “

q”.

*A confirmation message

appears. Press the
“MENU/OK” button to go to
DATE/TIME setting screen.

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
 ＮＯＴ ＳＥＴＮＯＴ ＳＥＴ

ＳＥＴＳＥＴ

ＮＯＮＯ

2

Indicator

C. Taking pictures

1. Set the Power
switch to “

q”.

2. Press the “EVF/LCD” button to
alternate the display between the
viewfinder (EVF) and the LCD monitor.
Press the “EVF/LCD” button to select
the viewfinder (EVF).

D. Viewing pictures

1. Set the Power switch to “w”.

2. Press “c” to scan forward

through your images.
Press “d ” to scan
backwards.

1 2

Bebeep

Beep

3. Press the shutter
button down
halfway to adjust
the focus.

4. Press the shutter button down fully to
take a picture. The camera makes a
“Beep” sound and takes the picture.

3 4

01

02

1

02

２００２００４      １    １１    １

１２ ： ００   ＡＭ１２ ： ００   ＡＭ

ＹＹＹＹ ＭＭ ＤＤＹＹＹＹ ＭＭ ＤＤ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬＯＫＯＫ

ＢＡＣＫＢＡＣＫ

/ S3500

Power switch

Photography mode

Playback mode

Power-OFF MOVIE (Video)

Shutter button

Self-timer lamp

Flash

Flash control
sensor

Lens

Mode dial

VIDEO OUT (Video output) socket

Manual

Scene position

AUTO

Flash pop-up button

xD-Picture Card slot

DC IN 5V (Power input)

Strap mount

Slot cover

(USB) socket

socket

d/ Macro button

Viewfinder (EVF)

EVF/LCD
(monitor selector)
button

Indicator lamp

LCD monitor

Tripod mount

a/ T(Tele zoom) button

c/ Flash button

W(Wide zoom)

b/

MENU/OK button

Viewfinder button

button

Strap mount

DISP (Display)

/ BACK button

Low Light

Battery cover

Viewing images on your PC

A. Install Software

Do not connect the camera to your PC until the software
installation is completed.

1. Turn your PC on and start up Windows.

●

!

Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).

2. Quit all other active applications until no applications are
shown in the taskbar.

3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.

4. The Setup screen appears.
Click the [Installing FinePixViewer] button.

5. After installation completed, press [Restart] button.

B. Connect the Camera to your PC

1. Load an xD-Picture Card containing photographed images
into your camera.

2. Set the “USB MODE” setting in the “SET-UP” menu to digital
camera “

¶”. (Refer to “USING THE SET-UP SCREEN” in

the owner’s manual.)

C. Save Images

1. The Save Image Wizard starts up. Click the [NEXT] button.

2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.

Ex. \My Documents \ My Pictures \ 2004_0723 Image

D. View Images

1. Click the [Show List of Images]
button.

2. Select “Preview” in the View menu to display an enlarged
image.

3. Turn your camera off.

4. If you have one, plug the AC power adapter connector into
the “DC IN 5V” socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your batteries are fresh and charged.

5. Use the USB cable (included) to connect the camera to your
PC.

6. Turn the camera on.

7.

FinePixViewer starts up automatically.

Windows 98/98 SE/Me/2000 Professional

q

The “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message will
close when the settings are completed. No action is
required.

w

Specify the settings in the “AutoPlay” dialog box.

e

Select “Viewing images using FinePixViewer” and then
select the “Always do the selected action” checkbox.

Windows XP

r

Click the [OK] button to launch FinePixViewer.

For more information

Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
( http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ

：ＳＥＴ：ＳＥＴ
：ＣＯＮＴ．：ＣＯＮＴ．

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

：ＳＥＴ：ＳＥＴ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＦＲＡＭＥ ＮＯ．ＦＲＡＭＥ ＮＯ．    

１ ３

ＵＳＢ ＭＯＤＥ

ＵＳＢ ＭＯＤＥ

２

A.Install Software

A.Install Software

B.Connect a Camera to PC

B.Connect a Camera to PC

C.Save Images

C.Save Images

Camera

DC IN 5V
socket

(USB)
socket

USB socket

PC