Fujifilm FINEPIX F460 User Manual

Battery rele ase catch

Indicators

F460

460

1AG6P1P2837-- FPT-507108

BL00505-200(1

)

B. Loading the battery

A. Charging the battery

1. Plug the Battery Charger BC40 (included) into the power outlet using the connection cord.

2. Load the battery into the Battery Charger BC-40 correctly as indicated by the polarity icon to start charging. Charging ends after about 90 minutes and the charging lamp turns off. Unplug the battery charger from the power outlet when it is not in use.

Hold the battery so that the indicators are aligned before loading the battery. Push the battery release catch aside while loading the battery.

1. Press the “POWER” button to turn the camera on.

Charging lamp

C. Setting up the camera

D. Taking pictures

Bebeep

Click

1. Set the Mode switch to “B”.

2. Press the shutter button down halfway to adjust the focus.

3. Press the shutter button down fully to take a picture. The camera makes a “Click” sound and takes the picture.

E. Viewing pictures

1. Press the “w” button.

2. Press “d ” or “c ” to move

through your images.

2 3

Shutter button

Self-timer lamp

Lens (lens cover)

Speaker

Indicator lamp

Microphone

(Playback) button

W (Wide zoom) button

Flash

DISP (Display) /

BACK button

Battery cover

MENU/OK button

T (Tele zoom) button

Strap mount

Tripod mount

LCD monitor

Photo mode( ) button

POWER button

Auto

Scene position

Movie

Mode switch

4-direction (abdc) button

Photography mode

d / (Macro) button

c / (Flash) button

a / (Low light view) button

b / (Self-timer) button

Playback mode

a / (Erase) button

DC IN 5V

(power input) socket

Terminal cover

USB socket

A/V OUT (audio /

visual output) socket

Battery compartment

Battery release

catch

xD-Picture Card slot

PUSH TO EJECT

Camera Controls

Picture Taking

Refer to Owner’s Manual for more detailed instructions

Still images that can be viewed on FinePix F460

You can use this camera to view still images recorded on FinePix F460 or still images (excluding some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Card.

2. You can select your preferred date format. Press “d” or “c” to select the date format, Year, Month, Day, Hour or Minute. Press “a” or “b” to correct the setting. Press the “MENU/OK” button after you complete the setting.

✽Refer to owner’s manual for

date/time setup.

1 2

SETS ET CANCELC AN CE L

2007 2006

2004 2003

YY.MM.DDY Y.M M. D D

2005

0021:11

AMA M

DATE/TIMEDA TE /T IM E

FinePix F460 has internal memory that can store images without xD-Picture Card. Use an xD-Picture Card (sold separately) when recording a large number of images.

Indicators

Battery release catch

Viewing images on your PC

A. Install Software

Do not connect the camera to your PC until the software installation is completed.

1. Turn on your PC and start up Windows.

●

Users of Windows 2000 Professional or Windows XP should log in by using a system administrator account (e.g. “Administrator”).

2. Quit all other active applications until no applications are shown in the taskbar.

3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically.

4. The Setup screen appears. Click the [Installing FinePixViewer] button.

5. After installation completed, press [Close] button.

B. Connect the Camera to your PC

C. Save Images

1. The Save image Wizard starts up. Click the [Start] button.

2. Check that the files are downloaded from the camera to your PC and that a folder with the date is created.

Ex. \My Documents \ My Pictures \ 2005_0824

D. View Images

1. Click the [Show List of Images] button.

Select “Preview” in the View menu to display an enlarged image.

FinePixViewer starts up automatically.

Windows 98/98 SE/Me/2000 Professional

The “Found New Hardware” help message appears in the bottom-right corner of your screen. This message will close when the settings are completed. No action is required. FinePixViewer starts up automatically.

Windows XP

For more information

Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5 and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the following website. ( http://home.fujifilm.com/products/digital/ ) For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.

3. Turn your camera off.

4. If you have one, plug the AC power adapter connector into the “DC IN 5V” socket on the camera and then plug the adapter itself into the main power outlet, otherwise be sure your battery is fresh and charged.

5. Turn your PC on.

6. Connect the camera to the PC using the USB cable (included).

1. Load an xD-Picture Card containing photographed images into your camera.

2. Press the “

w” button for about 1 second to turn the camera

on in Playback mode. Select “

¶” DSC in “ò” USB MODE in the “˜” SET-UP

menu (Refer to “USING THE SET-UP SCREEN” in the owner’s manual).

7. Press the “

w” button for about 1 second to turn the camera

on in Playback mode.

DSCD SC

ENGLISHE NG LI SH

OKO K

NTSCN TS C

: :

USB socket

PCCamera

A.Install Software

B.Connect a Camera to PC

C.Save Images