Fujifilm FINEPIX A605 User Manual

Getting Ready

Using

the Camera

Advanced

Features

Software

Installation

Settings

Viewing Images

BL00396-100(1

)

This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A605 correctly. Please follow the instructions carefully.

OWNER’S MANUAL

Warning

EC Declaration of Conformity

Please read the Safety Notes (➡P.81) and make sure you understand them before using the camera.

IMPORTANT

NOTICE

BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY FUJI PHOTO FILM CO., LTD., PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU DO AGREE TO THIS AGREEMENT, YOU WILL BE ABLE TO USE THE SOFTWARE RECORDED ON THE CD-ROM. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS AGREEMENT.

End User License Agreement

his End User License Agreement (“Agreement”) is an agreement between Fuji Photo Film Co., Ltd. (“FUJIFILM”) and you, which sets forth the terms and conditions of the license granted for you to use the software provided by FUJIFILM. The CD-ROM contains third party software. In case a separate agreement is provided by a third party supplier for its software, the provisions of such separate agreement shall apply to the use of such third party software, prevailing over those of this Agreement.

1. Definitions.

(a) “Media” means the CD-ROM titled “Software for FinePix AX” which is

provided to you together with this Agreement. (b) “Software” means the software which is recorded on Media. (c) “Documentation” means the operation manuals of Software and other

related written materials which are provided to you together with

Media. (d) “Product” means Media (including Software) and Documentation

collectively.

2. Use of Software.

FUJIFILM grants to you a nontransferable, nonexclusive license:

to install one copy of Software onto one computer in binary machine

(a)

executable form; (b) to use Software on the computer onto which Software is installed;

and (c) to make one backup copy of Software.

3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or any

part of Software, Media or Documentation to any third party without FUJIFILM’s prior written consent. You also shall not sublicense, assign or otherwise transfer all or any part of the rights granted to you by FUJIFILM under this Agreement without FUJIFILM’s prior written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not

copy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.

You also shall not alter or remove copyright and other proprietary notices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,

decompile, or disassemble Software.

Be sure to read this page before using the Software.

4. Ownership.

All copyrights and other proprietary rights to Software and Documentation are owned and retained by FUJIFILM or the third party suppliers as indicated on or in Software or Documentation. Nothing contained herein shall be construed, expressly or implicitly, as transferring or granting any right, license, or title to you other than those explicitly granted under this Agreement.

5. Limited Warranty.

FUJIFILM warrants to you that Media is free from any defect in material and workmanship under normal use for ninety (90) days from the date of your receipt of Media. Should Media not meet the foregoing warranty, FUJIFILM shall replace such defective Media with other Media bearing no defect. FUJIFILM’s entire liability and your sole and exclusive remedy with regard to any defect in Media shall be expressly limited to such FUJIFILM’s replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.

EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NONINFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY, MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.

IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.

You acknowledge that neither Software nor any part thereof, will be transferred, or exported to any country or used in any manner in violation of any export control laws and regulations to which Software is subject.

9. Termination.

In case you breach any of the terms and conditions hereof, FUJIFILM may immediately terminate this Agreement without any notice.

10. Term.

This Agreement is effective until the date when you cease to use Software, unless earlier terminated in accordance with Section 9 hereof.

11. Obligation upon termination.

Upon termination or expiration of this Agreement, you shall, at your own responsibility and expense, delete or destroy immediately all Software (including its copies), Media and Documentation.

12. Governing Law.

This Agreement shall be governed by and construed in accordance with laws of Japan.

Name

Address

declare that the product Product Name: FUJIFILM DIGITAL CAMERA FinePix A605 Manufacture’s Name: Fuji Photo Film Co., Ltd. Manufacture’s Address: 26-30, Nishiazabu 2-chome, Minato-ku,

is in conformity with the following Standards

following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and 93/68/EEC)and Low Voltage Directive (73/23/EEC).

Safety:EN60065 EMC:EN55022:1998 Classe B

Fuji Photo Film (Europe)G.m.b.H. Heesenstrasse 31 40549 Dusseldorf, Germany

Tokyo 106-8620, Japan

EN55024:1998 EN61000-3-2:1995 +A1:1998 +A2:1998

Dusseldorf, Germany April 1, 2004

Place Date Signature/Managing Director

Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA

Contents

.............................................................

Warning IMPORTANT EC Declaration of Conformity Preface Accessories included

.....................................................

............................

..............................................................

........................................

1 Getting Ready

LOADING THE BATTERIES AND THE MEDIA TURNING ON AND OFF SETTING THE DATE AND TIME CORRECTING THE DATE AND TIME CHANGING THE DATE ORDER SELECTING THE LANGUAGE

................................................................................................................

...................................................................................................

.................................................................................................

.........................................................................................................

......................................................................................................

2 Using the Camera

STILL PHOTOGRAPHY MODE

TAKING PICTURES (a AUTO MODE)

USING VIEWFINDER

■ Viewfinder lamp display NUMBER OF AVAILABLE FRAMES USING THE ZOOM (DIGITAL ZOOM) BEST FRAMING

PLAYBACK MODE

VIEWING YOUR IMAGES (PLAYBACK)

Single-frame playback/Selecting images/Multi-frame playback Playback zoom

ERASING IMAGES (ERASE FRAME)

................................................................................................................

..........................................................................................................

........................................................................................................................

...........................................................................................................................

3 Advanced Features

STILL PHOTOGRAPHY FUNCTIONS

TAKING PICTURES — SELECTING THE CAMERA SETTINGS

e MACRO (CLOSE-UP)

d FLASH

STILL PHOTOGRAPHY MENU

PLAYBACK MENU

o ERASING SINGLE/ALL FRAMES

u DPOF SET FRAME

u DPOF SET FRAME (RESET ALL)

iPROTECTING IMAGES (FRAME/SET ALL/RESET ALL)

.............................................................................................................................................

PHOTOGRAPHY MENU (Important. Please read.)

PHOTOGRAPHY MENU OPERATION

y QUALITY SETTINGS IN STILL PHOTOGRAPHY MODE

* SELF-TIMER PHOTOGRAPHY

q SHOOTING MODE

D EV (EXPOSURE COMPENSATION)

A WHITE BALANCE (SELECTING THE LIGHT SOURCE)

ALL FRAMES/FRAME/BACK

HOW TO SPECIFY PRINT OPTIONS (DPOF) HOW TO SPECIFY PRINT OPTIONS (FRAME SET/RESET)

FRAME SET FRAME RESET/SET ALL/RESET ALL

.....................................................................................................................

..............................................................................................................

...................................................................................................

....................................................................................................

.........................................................................................................................

..................................................................................................

..............................................................................................................................

Camera parts and features

Attaching the strap

Example of LCD Monitor text display 6 7

........................................................................................

.........................................................................................

.......................................................................................

...........................................................................................

.....................................................................................

...........................................................................................

......................................................................................

■ Still photography mode

■ Playback mode

.............................................................................

.................................................

..................................................

.......................................................................

...................................................

...................................................................................

....................................................

..........................................................................

..................................................

................................................................

...............................

.........................................

............

..........................

......................................

8 9 9 9 9

10 12 13 14 14 15

16 17 17 17 18 18

19 19 20 21

22 23 24

26 26 26 27 28 29 29

30 30 32 32 32 34 35 35 36

g AUTO PLAY (AUTOMATIC PLAYBACK)

Y TRIMMING

MOVIE MODE

r RECORDING MOVIES

MOVIE MENU

PLAYBACK MODE

r PLAYING BACK MOVIES

Settings

6 ADJUSTING THE MONITOR BRIGHTNESS

SET-UP

......................................................................................................................................

...................................................................................................................

........................................................................................................................................

y QUALITY SETTINGS IN MOVIE MODE

...............................................................................................................

■ Playing Back Movies

...........................................................................................................................................

F USING THE SET-UP SCREEN

■ SET-UP menu options POWER SAVE SETTING FORMAT TIME DIFFERENCE (TIME DIFFERENCE SETTING) FRAME NO.

..............................................................................................................................

.........................................................................................................................

.........................................................................................................

5 Software Installation

5.1 INSTALLATION ON A Windows PC

5.2 INSTALLATION ON A Mac OS 9.2

5.3 INSTALLATION ON A Mac OS X

6 Viewing Images

6.1 CAMERA CONNECTION

6.1.1 Using the AC power adapter (sold separately)

6.1.2 Connecting to a TV

6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER FOR PRINTING IMAGES (PictBridge FUNCTION)

6.2.1 Specifying images for printing on the camera

6.2.2 Specifying images for printing without using DPOF (single-frame printing)

6.3 CONNECTING TO A COMPUTER

6.3.1 Connecting to a Computer

6.3.2 Disconnecting the Camera

6.4 USING FinePixViewer

6.4.1 Mastering FinePixViewer

6.4.2 Uninstalling the Software

System Expansion Options Accessories Guide Using Your Camera Correctly Power Supply and Batteries

Applicable Batteries Notes on the Batteries Using the AA-size Ni-MH Batteries Correctly AC Power Adapter

.........................................

....................................

......................................

...........................................................................................................

.............................................................................................................

................................................................................................................

............................

........................

...........................

................................

........................................................................................

..............................................................................

.................................................................................

............................................................................................

......................................................................................................

.....................................................................................................

........................................................

..........................................................................................

............................................................................................

..............................................................................................

.................................................................

...................................................................

............................................................................................

................................................................................................

..................................................................................................

Procedure for discharging rechargeable

Ni-MH batteries

Notes on the xD-Picture Card™

Warning Displays

Troubleshooting

Specifications

...

Explanation of Terms

Safety Notes

...........................................

..............................................

.................................................

.....................................

...................................................

......................

...................

37 38

42 42

43 43

45 45 46 47 47

48 49

52 55

58 58 58

59 59

60 62 62 65 66 66

72 73 74 76 78 80 81

Preface Accessories included

■ Test Shots Prior to Photography

For important photographs (such as weddings and overseas trips), always take a test shot and view the image to make sure that the camera is working normally. h Fuji Photo Film Co., Ltd. cannot accept liability for

any incidental losses (such as the costs of photography or the loss of income from photography) incurred as a result of faults with this product.

■ Notes on Copyright

Images recorded using your digital camera system cannot be used in ways that infringe copyright laws without the consent of the owner, unless intended only for personal use. Note that some restrictions apply to the photographing of stage performances, entertainments and exhibits, even when intended purely for personal use. Users are also asked to note that the transfer of xD-Picture Card containing images or data protected under copyright laws is only permissible within the restrictions imposed by those copyright laws.

■ Liquid Crystal

If the LCD monitor is damaged, take particular care with the liquid crystal in the monitor. If any of the following situations arise, take the urgent action indicated. h If liquid crystal comes in contact with your skin

Wipe the area with a cloth and then wash thoroughly with soap and running water.

h If liquid crystal gets into your eye

Flush the affected eye with clean water for at least 15 minutes and then seek medical assistance.

h If liquid crystal is swallowed

Flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Then seek medical assistance.

■ Notes on Electrical Interference

If the camera is to be used in hospitals or aircrafts, please note that this camera may cause interference to other equipment in the hospital or aircraft. For details, please check with the applicable regulations.

■ Handling Your Digital Camera

This camera contains precision electronic components. To ensure that images are recorded correctly, do not subject the camera to impact or shock while an image is being recorded.

■ Trademark Information

h and xD-Picture Card™ are trademarks of

Fuji Photo Film Co., Ltd.

h IBM PC/AT is a registered trademark of International

Business Machines Corp. of the U.S.A.

h Macintosh, Power Macintosh, iMac, PowerBook, iBook

and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

h Adobe Acrobat

Systems Incorporated of the U.S.

h Microsoft, Windows, and the Windows logo are

trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows is an abbreviated term referring to the Microsoft

✽ The “Designed for Microsoft

refers to the camera and the driver only.

h Other company or product names are trademarks or

registered trademarks of the respective companies.

Reader®is a trademark of Adobe

Windows®Operating System.

Windows®XP” logo

■ Explanation of Color Television System

NTSC: National Television System Committee, color

television telecasting specifications adopted mainly in the U.S.A., Canada and Japan.

PAL: Phase Alternation by Line, a color television

system adopted mainly by European countries and China.

■ Exif Print (Exif ver. 2.2)

Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.

h 16 MB, xD-Picture Card™ (1)

Included with: Anti-static case (1)

h Strap (1)

h USB Interface Set (1)

i CD-ROM: Software for FinePix AX (1)

USB cable (mini-B) (1)

i i Quick start guide for Camera and Software

installation (1)

h LR6 AA-size Alkaline Batteries (2)

h Video cable (1)

2.5 mm dia. plug-to-pin plug Approx. 1.5 m (4.9 ft.)

h Owner’s Manual (this manual) (1)

6 7

Camera parts and features

Number of available frames

Battery level warning

Quality mode

AE warning

Camera shake warning

１１２００４１１２００４

１９１９

Zoom bar

Date

Macro (close-up)

White balance

EV (Exposure compensation)

Flash

Photography mode

Self-Timer

１００ー０００１１００ー０００１

１１２００４１２：００ＡＭ１１２００４１２：００ＡＭ

Battery level warning

Zoom bar

Protection

DPOF

Playback mode

Date

Playback frame number

１１２００４

１９

ＹＥＳ

ＣＡＮＣＥＬ

ＹＥＳＹＥＳ



ＣＡＮＣＥＬＣＡＮＣＥＬ

１００−０００９１００−０００９

ＥＲＡＳＥＥＲＡＳＥＯＫ？ＯＫ？

ＦＲＡＭＥＦＲＡＭＥ

✽ Refer to the pages in parentheses for information on

using the camera parts or features.

Attaching the strap

01 02

Attach the strap as shown in 1 and 2.

Shutter button

Viewfinder window

Flash

Macro selector switch (P.23)

VIDEO OUT (Video output)

(P.58)

Power switch

socket

/ Lens cover

USB socket (mini-B)

(P.59)

Example of LCD Monitor text display

■ Still photography mode

Self-timer lamp (P.27)

Lens

ON (Playback) button

Viewfinder lamp

Viewfinder

LCD monitor

Tripod mount

8 9

MENU/OK button

DISP (Display) / BACK button

DC IN 3V (power input)

socket

(P.58)

d button

/ (Tele) b / (Wide) (P.18)

Zoom switch

(P.18)

c / Flash button (P.24)

Strap mount

Battery cover

Battery

compartment

xD-Picture Card slot

■ Playback mode

Displaying the On-screen Help

◆

Instructions for the next step in the procedure are displayed at the bottom of the LCD monitor. Press the button indicated.

◆

ＹＥＳ

ＣＡＮＣＥＬ

Press the “MENU/OK” button to erase the displayed frame. To cancel erasing, press the “DISP/BACK” button.

Indicator

LR6 AA-size

batteries

Lit red

Blinking red

１９１９

Blinking red

Lit red

No icon

1 Getting Ready

LOADING THE BATTERIES AND THE MEDIA

Compatible batteries

h AA-size alkaline batteries (2) or AA-size Ni-MH batteries (sold separately) (2).

Please use the same brand and grade AA-size alkaline batteries as those supplied with the camera.

●

How to use the batteries

◆

h Never use the following types of batteries, as this could cause serious

problems such as batteries fluid leakage or overheating:

1. Batteries with split or peeling outer casings

2. Combinations of different types of batteries or new and used batteries together

h Do not use manganese or Ni-Cd batteries. h Soil, such as fingermarks on the poles of the batteries can shorten time for which the batteries can be

used. The time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries) can be

used varies depending on the brand, and some alkaline batteries may stop providing power more quickly than those supplied with the camera. Note also that due to their nature, the time for which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to +50°F). The use of AA-size Ni-MH batteries is better for this reason.

h Use Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries. h See P.70, 71 for other notes on using batteries. h When first purchased or if left unused for a long period, the time for which AA-size Ni-MH

batteries can be used may be shorter. See P.71 more information.

h When the surfaces of AA-size Ni-MH batteries terminals have become worn through repeated use or

the battery has been taken out of the camera and left for a long period, the battery may stop supplying power or may become usable only for shorter periods. To restore normal battery operation, open and close the battery cover several times to dislodge any soiling on the terminals.

◆

Outer casing

Check that the camera is turned off (viewfinder lamp is off) before opening the battery cover.

Opening the battery cover while the camera is on, the camera

●

is turned off.

Do not apply force to the battery cover.

●

Do not open the battery cover while the camera is on. This could damage the xD-Picture Card or ruin the image files on the xD-Picture Card.

How to replace the xD-Picture Card

◆

Checking the battery charge

Turn the camera on and check the battery charge.

Close the battery cover.

◆

Pull out the xD-Picture Card, taking care that the batteries do not fall out.

If the xD-Picture Card is difficult to remove, take out the

●

batteries first.

1There is ample battery charge. 2There is insufficient charge left in the batteries.

The batteries will soon run out. Have a new set of batteries ready.

3The batteries are depleted. The display will

shortly go blank and the camera will stop working. Replace or recharge the batteries.

“C” appears as a small icon on the right-hand side of the LCD monitor. “V” appears as a large icon on the LCD monitor.

Getting Ready

Load the batteries correctly as indicated by the

10 11

polarity icons.

Align the indicators on the xD-Picture Card slot and xD-Picture Card and then push the card firmly all the way into the slot.

If the xD-Picture Card is oriented incorrectly, it will not go all

●

the way into the slot. Do not apply force when inserting an xD-Picture Card.

The information above is a guide for Photography mode. Depending on the camera mode and the type of batteries

●

used, the transition from “

Due to the nature of the battery, the battery low warning may appear early when the camera is used in cold

●

locations. This is normal. Try warming the batteries in your pocket or a similar location before use.

✽ Battery level warning

1) The camera’s estimation of the remaining battery charge varies greatly depending on the camera operation mode. Consequently, even if “ to Photography mode.

2) Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first displaying a battery level warning. This is particularly to happen when batteries that have run out of charge once are re-used.

In situation 2), immediately load new or fully charged replacement batteries.

Power save function

◆

When this function is active, it turns off the LCD monitor to reduce power consumption if the camera is not used for 30 seconds (➡P.47). If the camera is then left unused for 2 or 5 minutes, the Power save function turns the camera off. To restore power to the camera to take pictures, briefly close and then reopen the lens cover. To play back images, close the lens cover then hold down the “Playback” button for approx. 1 second.

C” to “V” may occur more quickly.

C” or “V” is not displayed in Playback mode, one of them may appear when you change

◆

TURNING ON AND OFF SETTING THE DATE AND TIME

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＮＯＴＮＯＴＳＥＴＳＥＴ

ＳＥＴＳＥＴ

ＮＯＮＯ

１２：１２：００００ＡＭＡＭ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＤＤＭＭＹＹＹＹＤＤＭＭＹＹＹＹ

２３２３４２００４２００４

１１１１２００４２００４

１２：００ＡＭ１２：００ＡＭ

ＤＤＤＤＭＭＭＭＹＹＹＹＹＹＹＹ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

Turn the camera on in Photography mode

Power-OFFPower-ON

Open the lens cover to turn the camera on in Photography mode.

Power save function

◆

Close the lens cover to turn the camera off.

Turn the camera on in Playback mode

Power-ON/OFFClose the lens cover

Leave the lens cover closed. Press the “Playback” button for approx. 1

Power save function

◆

When this function is active, if the camera is then left unused for 2 or 5 minutes, the Power save function turns the camera off (➡P.47). To restore power to the camera, close the lens cover and then hold down the “Playback” button for approx. 1 second.

◆

second to turn the camera on in Playback mode. Press the “Playback” button during playback to turn the camera off.

Move to Photography mode or Playback mode

Shooting ba PlaybackPower-ON

After purchasing the camera, first time when you turn camera on, the date and time are cleared. Press the “MENU/OK” button to set the date and time.

To set the date and time later, press the “DISP/BACK” button.

●

If you do not set the date and time, this message will appear

●

each time you turn the camera on.

1Press “d” or “c” to select Year, Month, Day,

Hour or Minute.

2Press “a” or “b” to correct the setting.

Holding down “a” or “b” changes the numbers continuously.

●

When the time displayed passes “12:00”, the AM/PM setting

●

changes.

Once you have set the date and time, press the “MENU/OK” button. Pressing the “MENU/OK” button changes the camera to Photography or Playback mode.

At the time of purchase and after you leave the camera for a

●

long period with the batteries removed, settings such as the date and time are cleared. Once the AC power adapter has been connected or the batteries have been loaded for 30 minutes or more, the camera settings will be retained for roughly 3 hours even when the camera has no power (batteries removed and AC power adapter disconnected).

Getting Ready

Open the lens cover to turn the camera on in Photography mode.

12 13

Press the “Playback” button for approx. 1 second during shooting to change to Playback mode. Press the “Playback” button for approx. 1 second again to return to Photography mode.

CORRECTING THE DATE AND TIME / CHANGING THE DATE ORDER

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＯＰＴＩＯＮＯＰＴＩＯＮ

ＬＣＤＬＣＤ

ＴＩＭＥＤＩＦＦＥＲＥＮＣＥＴＩＭＥＤＩＦＦＥＲＥＮＣＥ

ＳＥＴＳＥＴ

ＬＣＤＬＣＤ

ＯＮＯＮＣＯＮＴ．ＣＯＮＴ．

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＳＥＴＳＥＴ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＦＲＡＭＥＮＯ．ＦＲＡＭＥＮＯ． 

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

１

２

４３

１２：００ＡＭ１２：００ＡＭ

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

ＤＤＭＭＹＹＹＹＤＤＭＭＹＹＹＹ

２３４２３４２００４２００４

ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

４４／２３／２００４／２３／２００４

１２：００ＡＭ１２：００ＡＭ

ＭＭ／ＤＤ／ＹＹＹＹＭＭ／ＤＤ／ＹＹＹＹ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＯＰＴＩＯＮＯＰＴＩＯＮ

ＬＣＤＬＣＤ

：

言語言語

／ＬＡＮＧ．／ＬＡＮＧ．



ＥＮＧＬＩＳＨＥＮＧＬＩＳＨ

ＶＩＤＥＯＳＹＳＴＥＭＶＩＤＥＯＳＹＳＴＥＭ

：ＰＡＬＰＡＬ：ＯＫ：ＯＫ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

ＵＳＢＭＯＤＥＵＳＢＭＯＤＥ

ＤＩＳＣＨＡＲＧＥ

１ 2３4

ＳＥＴＳＥＴ

ＣＡＮＣＥＬＣＡＮＣＥＬ

SELECTING THE LANGUAGE

01 03 02

01 02

1Press the “MENU/OK” button. 2Press “d” or “c ” to select “F” OPTION and

then press “a” or “b” to select “SET-UP”.

3Press the “MENU/OK” button.

1Press “d” or “c” to move to option 2 and then

press “a” or “b” to select “DATE/TIME”.

2Press “c”.

Correcting the date and time

1Press “d” or “c” to select Year, Month, Day,

Hour or Minute.

2Press “a” or “b” to correct the setting. 3Always press the “MENU/OK” button to

complete the settings.

01 02

1Press the “MENU/OK” button to display the

menu on the LCD monitor.

2Press “a”, “b”, “d” or “c” to select “SET-UP”

from the “F” OPTION menu.

3Press the “MENU/OK” button.

1The “SET-UP” screen appears. Press “a” or “b”

to select “ ”.

2Press “c ” to select “ ”, “ENGLISH”,

“FRANCAIS”, “DEUTSCH”, “ESPAÑOL” or “ ”. Press “c” to cycle through the language settings.

The screens in this manual are shown in English.

●

See P.46 for more information on the “F” OPTION menu.

●

Getting Ready

01 02 03

Holding down “a” or “b” changes the numbers continuously.

●

When the time displayed passes “12:00”, the AM/PM setting

●

changes.

Changing the date order

1Press “d” or “c” to select the date order. 2Press “a” or “b” to set the date order. Refer to

the table below for details of the settings.

3Always press the “MENU/OK” button to

complete the settings.

Date order Explanation

01 02

14 15

YYYY.MM.DD

MM/DD/YYYY

DD.MM.YYYY

Displays the date in the “year.month.day” format.

Displays the date in the “month/day/year” format.

Displays the date in the “day.month.year” format.

Using

Beep

１９１９

the Camera

STILL PHOTOGRAPHY MODE

TAKING PICTURES (a AUTO MODE

)

LCD monitor

Open the lens cover. h Focal range: Approx. 80 cm (2.6 ft.) to infinity

For close-up shots, use the Macro setting (➡P.23).

●

The LCD monitor cannot be turned off in Macro mode.

●

If “å”, “˙”, “∆” or

●

©” appears, see P.74.

“

Brace your elbows against your sides and hold the camera with both hands. Position your right thumb so that it is handy for using the zoom.

Moving the camera while shooting gives a blurred picture

●

(camera shake). Use a tripod to avoid camera shake, particularly for shots in the dark when the selected flash mode is Suppressed flash.

There may be some unevenness in the brightness at the

●

lower edge of the LCD monitor. This is normal does not affect the image.

Hold the camera so that your fingers or the strap do not cover the lens or flash. If the lens or flash is obscured, the brightness (exposure) of your shot may be incorrect.

Check that the lens is clean. If it is dirty, clean the lens as

●

described on P.70.

If the flash is used in very dusty conditions or when it is

●

snowing, white dots may appear in the image due to the flash reflecting off dust particles or snowflakes. Use Suppressed flash mode.

Use the LCD monitor or viewfinder to frame your shot.

The image on the LCD monitor before the picture is taken

●

may differ in brightness, color, etc. from the image actually recorded. Playback the recorded image to check it (➡P.19).

The subject may sometimes be difficult to see clearly on the

●

LCD monitor (in bright sunlight or dimly lit scenes, etc.). If so, use the viewfinder to take the picture.

Press the shutter button. The camera emits a short beep and takes the picture. The data is then recorded.

USING VIEWFINDER

To take pictures using the viewfinder, press the

“DISP/BACK” button to turn the LCD monitor off (Turning the LCD monitor off conserves battery power).

The viewfinder cannot be used to take pictures in Macro

●

mode.

Brace your elbows against your sides and hold the camera with both hands. Position of your right thumb so that it is handy for using the zoom.

Moving the camera while shooting gives a blurred picture

●

(camera shake). Use a tripod to avoid camera shake, particularly for shots in the dark when the selected flash mode is Suppressed flash.

Use the viewfinder to frame your shot.

Viewfinder

■ Viewfinder lamp display

Display Status

Lit green Ready to shoot Blinking green and

orange alternately Lit orange Recording to xD-Picture Card (Not ready) Blinking orange Flash charging (Flash will not fire) Blinking green

(1-second intervals) Blinking red xD-Picture Card Warnings

Recording to xD-Picture Card (Ready to shoot)

Camera in Power Save mode (➡P.47)

No card loaded, card not formatted, incorrect format, card full, xD-Picture Card error

✽ When the LCD monitor is turned on, more detailed warning messages are displayed (➡P.74-75).

For more precise shot framing, use the LCD monitor to take

●

the picture.

Using the Camera

NUMBER OF AVAILABLE FRAMES

The number of available frames on this card appears on the LCD monitor.

See P.79 for information on standard number of frames for

●

xD-Picture Card.

See P.26 for information on changing the quality mode.

●

The default quality “y” set at shipment is 3.

●

There is a slight delay between the Shutter button being

●

pressed and the picture being taken. If necessary, playback the shot to check the image.

When the camera takes the picture, the viewfinder lamp lights

●

orange (shooting disabled). The viewfinder lamp then turns green and the next picture can be taken.

The viewfinder lamp blinks orange while the flash is charging.

●

The monitor may go dark briefly. This is normal.

See P.74-75 for information on the warning displays.

●

16 17

１００ー０００９１００ー０００９

Playback frame number

Text displayed

Framing guideline displayed

No text displayed

LCD monitor OFF

STILL PHOTOGRAPHY MODE

１９１９



３３３３

Zoom bar

TAKING PICTURES (a AUTO MODE

)

PLAYBACK MODE

VIEWING YOUR IMAGES (PLAYBACK

)

USING THE ZOOM (DIGITAL ZOOM

BEST FRAMING

)

Pressing “a ([)” or “b (])”, the digital zoom can be used with the “3”, “1 ” and “` ” quality settings. The digital zoom can only be used for pictures taken using the LCD monitor.

The digital zoom cannot be used with the “5” setting.

●

See P.26 for information on changing the quality mode

●

setting.

The zoom bar appears on the LCD monitor.

h Digital zoom focal lengths

3: Approx. 38 mm-53 mm,

max. zoom scale: approx. 1.4×

1: Approx. 38 mm-84 mm,

max. zoom scale: approx. 2.2×

`: Approx. 38 mm-152 mm,

max. zoom scale: approx. 4.0×

Select framing guideline function in Photography mode. Pressing the “DISP/BACK” button changes the LCD monitor display. Press the “DISP/BACK” button until “Framing Guideline” appears.

✽

✽ 35 mm camera equivalents

01 02

Text displayed

No text displayed

Multi-frame playback

Single-frame playback

1Press the “Playback” button for approx. 1

second to change to Playback mode.

2Press “c” to scan forward through your images

and Press “d” to scan backwards.

When the camera is set to Playback mode, the last image

●

shot appears on the LCD monitor.

When the Power save function turns the camera off, close the

●

lens cover and then hold down the “Playback” button for approx. 1 second.

Selecting images

To select images on the thumbnail lists screen, hold down “d” or “c” for approx. 1 second during playback.

Multi-frame playback

In Playback mode, press the “DISP/BACK” button to change the display shown on the LCD monitor. Press the “DISP/BACK” button until the multi-frame playback screen (9 frames) appears.

Using the Camera

Scene

Position the main subject at the intersection of two lines in this frame or align one of the horizontal lines with the horizon. Use this frame as a guide to the subject’s size and the balance of the shot while composing a shot.

The framing guideline is not recorded on the image.

●

The lines in the scene frame divide the image into 3 roughly equal parts

●

horizontally and vertically. The resulting printed image may be shifted slightly from the scene frame.

01 02

Still images viewable on the FinePix A605

◆

This camera will display still images recorded on the FinePix A605 or still images (excluding some uncompressed images) recorded on any FUJIFILM digital camera that supports xD-Picture Cards.

1Press “a”, “b”, “d” or “c” to move the cursor

(orange frame) to the frame you want to select. Press “a” or “b” repeatedly to jump to the next page.

2Press the “DISP/BACK” button again to view an

enlarged version of the image.

The LCD monitor text display disappears after 3 seconds.

●

Playback zoom cannot be used with multi-frame playback.

●

◆

ＦＲＡＭＥＦＲＡＭＥ

ＡＬＬＦＲＡＭＥＳＡＬＬＦＲＡＭＥＳ

ＢＡＣＫＢＡＣＫ

ＥＲＡＳＥＥＲＡＳＥ

ＹＥＳＹＥＳＣＡＮＣＥＬＣＡＮＣＥＬ



１００−０００９１００−０００９

ＥＲＡＳＥＥＲＡＳＥＯＫ？ＯＫ？

ＦＲＡＭＥＦＲＡＭＥ

ＡＬＬＦＲＡＭＥＳＡＬＬＦＲＡＭＥＳ

ＢＡＣＫＢＡＣＫ

ＥＲＡＳＥＥＲＡＳＥ

PLAYBACK MODE

ＰＡＮＮＩＮＧＰＡＮＮＩＮＧ

ＣＡＮＣＥＬＣＡＮＣＥＬ

VIEWING YOUR IMAGES (PLAYBACK

)

PLAYBACK MODE

ERASING IMAGES (ERASE FRAME

)

01 02

Playback zoom

Press “a ([)” or “b (])” during single-frame playback to zoom in (enlarges) or out on a still image. A zoom bar appears. Press the “DISP/BACK” button to return to singleframe playback.

■ Zoom scales

Quality mode

5 (2816 × 2120) 3 (2048 × 1536) 1 (1280 × 960) ` (640 × 480)

1Press “d” or “c” to select to “PANNING”. 2Press “a”, “b”, “d”, or “c” to display another

area. Press the “DISP/BACK” button to return to playback zoom.

Max. zoom scale

Approx. 17.6× Approx. 12.8×

Approx. 8× Approx. 4×

01 02

Return to single-frame playback

Press the “Playback” button for approx. 1 second to turn the camera on in Playback mode.

1Press the “MENU/OK” button during playback to

display the menu.

2Press “d” or “c” to select “o” ERASE.

Erased frames (files) cannot be recovered. Back up important frames (files) onto your computer or another media.

1Press “a” or “b” to select “FRAME”. 2Press the “MENU/OK” button to confirm the

selection.

See P.30 for information on “ALL FRAMES”.

Using the Camera

01 02

1Press “d” or “c” to select the frame (file) to be

erased.

2Press the “MENU/OK” button to erase the

displayed frame (file). To erase another image, repeat steps 1 and 2. When image erasing is completed, press the “DISP/BACK” button.

Press the “MENU/OK” button repeatedly to erase consecutive

●

images. Take care not to erase important image.

１９１９

Advanced Features

STILL PHOTOGRAPHY FUNCTIONS

TAKING PICTURES — SELECTING THE CAMERA SETTINGS

STILL PHOTOGRAPHY FUNCTIONS

e MACRO (CLOSE-UP

)

Consider the scene you are photographing and the sort of image you want to achieve when you specify the camera settings. A general guide is given below.

Select the Photography mode

Auto Leaves the “EV” and “White balance” settings to the

camera.

Manual Sets the “EV” and “White balance” to manual to easily

control yourself.

Specify the photography settings

Macro Uses for close-up shots.

Flash Uses for photography in dark locations or for backlit

subjects, etc.

Quality Set the size of the recorded image when the picture is

taken. The size set is matched to the intended use of the print size.

Self-timer Uses in situations such as group shots where the

photographer is included in the shot.

EV Uses the AE exposure as a reference value of 0, this

(Exposure compensation)

White balance Uses to fix the white balance to suit the photography

function brightens (+) or darkens (–) the shot.

conditions and lighting.

Take the pictures

■ Photography Mode Specifications

e MACRO

d FLASH

y Quality * Self-timer

D EV (Exposure Compensation) A White balance

AUTO Auto Flash

bRed-Eye Reduction

d Forced Flash v Suppressed Flash c Slow Synchro n Red-Eye + Slow

Default Setting

OFF

AUTO

OFF

AUTO

YES YES YES YES YES

NO YES YES

YES YES YES YES YES YES YES YES YES YES YES

01 02

When you use the viewfinder to take a picture in Macro mode, the field visible through the viewfinder does not match the field actually photographed because the viewfinder and lens are in different positions. Accordingly, you should use the LCD monitor to take pictures in Macro mode.

Select Macro mode to take close-up shots. The flash is automatically set to “v” Suppressed flash mode.

1Open the lens cover. 2To switch to Macro mode, slide the Macro

selector switch towards the “e” Macro icon until it stops.

“e”: The “e” icon appears on the LCD monitor and

close-up shots are taken.

“,”: Macro mode is cancelled and the camera is

ready for normal shooting (➡P.16).

h Focal range

Approx. 9 cm to 12 cm (3.5 in. to 4.7 in.)

Using the camera width (about 10 cm/4 in.) as a guide,

●

ensure that the distance to the subject is between 9 cm and 12 cm (3.5 in. and 4.7 in.). The camera will not focus on subjects outside this focal range.

To use the flash, select the “d” Forced Flash or “c” Slow

●

Synchro setting in the menu screen (➡P.24, 25). However, you may not be able to obtain the correct brightness (exposure) for your shot.

Use a tripod to avoid camera shake when shooting in the

●

dark (when “

Once the LCD monitor is turned ON and cannot be turned

●

OFF.

Canceling Macro mode, the LCD monitor remains on.

●

Do not take a picture when the Macro selector switch is

●

stopped mid-way.

|” appears).

Advanced Features

STILL PHOTOGRAPHY FUNCTIONS

d FLASH

01 02

Choose from 6 flash modes according to the type of shot.

1Open the lens cover. 2The flash setting changes each time you press

the “d” Flash button (c). The last flash mode displayed is selected.

h Effective flash range (for

Approx. 0.8 m to 3.0 m (2.6 ft. to 9.8 ft.)

If the flash is used in very dusty conditions of when it is

●

snowing, white dots may appear in the image due to flash reflecting off dust particles or snowflakes. Use Suppressed flash mode.

The flash charging time may increase when the batteries are

●

low on charge.

When taking a picture using the flash, the image may

●

disappear and the LCD monitor go dark as the flash charges. The viewfinder lamp then blinks orange.

The available Flash modes are limited depending on the

●

Photography menu selected (➡P.22).

The flash fires several times (pre-flashes and the main flash).

●

Auto Flash Mode (no icon

Use this mode for ordinary photography. The flash fires as required by the shooting conditions.

If pressing the Shutter button while the flash is charging, the picture will

●

be taken without the flash.

Red-eye reduction

Use this mode to make sure that the subject’s eyes appear normal when taking pictures of people in low-light conditions. The flash fires a pre-flash just before the picture is taken and then fires again to take the actual picture. The flash fires as required by the shooting conditions.

If pressing the Shutter button while the flash is charging, the picture will

●

be taken without the flash.

a Auto)

)

Forced flash

Use this mode in backlit scenes, such as a subject against a window or in the shade of a tree, or to get the correct colors when taking a picture under bright lighting. In this mode, the flash fires in bright as well as dark conditions.

Suppressed flash

Use this mode for taking pictures using indoor lighting, for shots taken through glass, and for photography in places such as theaters or at indoor sporting events where the distance is too great for the flash to be effective. In this situation, use the specified white balance (➡P.80) to take pictures that retain the atmosphere given by the ambient lighting.

Use a tripod to avoid camera shake when shooting in Suppressed

●

Flash mode in the dark condition.

See P.74 for information on the camera shake warning.

●

Slow synchro

This is a Flash mode that uses a slow shutter speed. This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. To prevent camera shake, always use a tripod.

h Slowest shutter speed: Up to 1/2 sec.

Red-eye reduction + Slow synchro

Use this mode for Slow synchro shots with Red-eye reduction.

The image may be overexposed when shooting bright scenes.

●

Advanced Features

Red-eye effect

◆

When using the flash to taken a picture people in low-light conditions, their eyes sometimes appear red in the picture. This is caused by the light of the flash reflecting off the inside of the eye. Use Red-eye reduction flash to minimize the likelihood of the effect. Take the following measures to make Red-eye reduction more effective:

h Get the subjects to look at the camera. h Get as close as possible to the subjects.

◆

+ 30 hidden pages

Fujifilm FINEPIX A605 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual