THE COMPONENTS INDENTIFIED BY MARK IN THE PARTS LIST SHOULD
BE REPLACED ONLT BY THE COMPONENTS SPECIFIED IN THE PARTS LIST.
RISK OF FIRE AND ELECTRIC SHOCK.
Ref.No.:ZM00343-301
FUJI PHOTO FILM CO., LTD.
Printed in Japan 2000.10(NT)
SAFETY CHECK-OUT
After correcting the original problem, perform the follo wing safety
check bef ore return the product to the costomer.
FinePix4900ZOOM(E/EG) PARTS LIST
1. Check the area of your repair for unsoldered or
poorly soldered connections. Chec k the entire
board surface f or solder splasher and bridges .
2. Check the interboard wiring to ensure that no
wires are “pinched” or contact high-wattage
resistors.
3. Look for unauthorized replacement parts,
particularly transistors, that were installed
during a previous repair . Point them out to the
customer and recommend their replacement.
4. Look for parts which, though functioning, show
obvious signs of deterioration. Point them out
to the customer and recommend their
replacement.
5. Check the B + voltage to see it is at the v alues
specified.
6.CAUTION: FOR CONTINUED
PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY WITH
SAME TYPE 2.5 AMPERES 125V
FUSE.
ATTENTION: AFIN D'ASSURER
UNE PROTECTION PERMANENTE
CONTRE LES RISQUES
D'INCENDIE, REMPLACER
UNIQUEMENT PAR UN FUSIBLE
DE MEME, TYPE 2.5 AMPERES,
125 VOLTS.
2.5A125V
2.5A125V
RISK OF FIREREPLACE FUSE
AS MARKED
7.WARNING:
TO REDUCE THE ELECTRIC
WARNING!
HIGH VOLTAGE
SHOCK, BE CAREFUL TO TOUCH
THE PARTS.
2
FinePix4900ZOOM(E/EG) PARTS LIST
TABLE OF CONTENTS
1. Packing and Accessories ......................... 4
2. Mechanical Parts
2-1.Cabinet F ................................................................ 8
2-2.Cabinet R .............................................................10
3. Electrical Parts .......................................12