Fuji Electric PX Specifications

PX SERIES

FUJI ELECTRIC FUZZY LOGIC CONTROLLERS ARE THE LEADERS IN PRECISION CONTROL

Breakthrough technology. That’s what the Fuji PX series fuzzy logic controllers are all about. Faster. Smarter. Tougher.

More Versatile. More Features. Redesigned from the ground up. Redeveloped from the inside out. Welcome to the 21st century,

and meet the leaders in control technology.

The NEMA 4X protection makes them tough enough to withstand the harshest of environments. Fuji’s fuzzy logic algorithm makes

them smart enough to learn your process and make rapid, accurate adjustments. A variety of choices for number of buttons,

DIN size, configuration, and options make them versatile enough to match your individual needs.

All of the PX controllers employ Fuji’s patented fuzzy logic algorithm with PID Autotune. These controllers “learn” your process, using

the PID parameters as a starting point for all decisions made by the controller. This intelligence allows your process to reach its setpoint

in the shortest time possible while virtually eliminating overshoot. The end result is that your process maintains a steady setpoint.

Eight-segment ramp/soak programming. Advanced security options. Versatile programming. Fuzzy logic intelligence. NEMA 4X

protection. All of these features come STANDARD in a PX controller.

• Choose Among 1⁄4 DIN, 1⁄8 DIN, 72mm, and 1⁄16 DIN Sizes

There’s a size available to accommodate

your space needs

• Front Panel Key Choices

Choose between eight-button or three-button

operation

• Fuzzy Logic Control with PID Autotune

The controller uses artificial intelligence to

learn your process

• NEMA 4X Protection

It’s tough enough for the harshest of environments

• All Parameters Are Display Maskable

Hide unused parameters

• 8-Segment Ramp/Soak Programming is a Standard Feature

Set four setpoints, four ramp rates, and

four soak periods

• Program Loader Interface

Download programs from your PC

• Wide Input Selection

A variety of choices for your input needs

• Low-Voltage Power Supply Option

24V AC/DC option

• Lower Prices than Other PID Controllers

You get more standard features for less money

• Three-Year Warranty

Protects against manufacturing defects

Information subject to change without notice. Prices in USD.

PX SERIES, CONTINUED

PX SERIES SPECIFICATIONS

GENERAL SPECIFICATIONS

RATED VOLTAGE 85 to 264 VAC or 24V AC/DC ±10% POWER CONSUMPTION 10VA or less (100 VAC), 15VA or less (240 VAC)

INPUT SIGNAL

INPUT SIGNAL Thermocouples: J, K, R, B, S, T, E, N and PL2

RTDs: Pt100 DC Voltage/Current: 1 to 5 VDC, 0 to 5 VDC, 4 to 20mA DC, and 0 to 20mA DC

INPUT FILTER 0 to 900.0 sec, setting in 0.1 sec steps

CONTROL FUNCTION

CONTROL ACTION

PID control with auto-tuning; Fuzzy control with auto-tuning

PROPORTIONAL BAND (P) 0 to 999.9% of full scale (FS),

setting in 0.1% steps

INTEGRAL TIME (I) 0 to 3200 seconds, setting in 1 second steps DIFFERENTIAL TIME (D) 0 to 999.9 seconds, setting in 0.1 second steps PROPORTIONAL CYCLE 1 to 150 seconds, setting in 1 second steps HYSTERESIS WIDTH 0 to 50% FS, setting in 1 E.U. steps,

On/Off action only

INPUT SAMPLING CYCLE 0.5 seconds

OUTPUT

STANDARD OUTPUT TYPE One of the following control output types

is selected:

1. Relay Contact (SPDT): 220 VAC/30 VDC, 3A (resistive load)

2. SSR/SSC Drive (voltage pulse): 15 to 30 VDC at ON/0.5 VDC or less at OFF, Current 60mA or less

3. 4 to 20mA DC: Allowable load resistance: 600Ω or less

4. 0 to 10 VDC: Allowable load resistance: 500kΩ or more

5. Triac: 1A, 250 VAC

DUAL-OUTPUT TYPE For dual output type, one of the following five (HEAT/COOL) control output types is selected on both heating

and cooling types (not available on PXW/Z-4 type)

1. Relay Contact SPDT 220 VAC/30 VDC, 3A (resistive load)

2. SSR/SSC Drive (Voltage Pulse). ON: 15 to 30 VDC. OFF: 0.5 VDC or less. Current: 60mA or less

3. 4 to 20mA DC: Allowable load resistance: 600Ω or less

4. 0 to 10 VDC: Allowable load resistance: 500kΩ or more

5. Triac: 1A, 250 VAC

OPERATION AND DISPLAY SECTION

PARAMETER SETTING METHOD PXZ: Digital setting with 8 keys

PV/SV DISPLAY METHOD PXZ-4: PV/SV Red LED display, 4-digit

PXW: Digital setting with 3 keys

PXW, PXZ-5, 7, 9: Dual PV/SV LED display, 4 digits each, PV= Red, SV=Green

STATUS DISPLAY Control output, alarm output, heater burnout

alarm output

INDICATION ACCURACY Thermocouple: ±0.5% FS ±1 digit ±1°C (at 23°C) R Thermocouple: 0 to 400°C;

±1% FS ±1 digit ± 1°C B Thermocouple: 0 to 500°C; ±5% FS ±1 digit ± 1°C RTD, Voltage, Current: ±0.5% FS ±1 digit

ALARM

ALARM OUTPUT Relay contact (SPST), 220 VAC/30 VDC,

1A (resistive load) PXW/Z-4 type: 1 point; Other types: 2 points (Configurable as absolute, deviation, zone, or combination alarms with or without the hold features)

HEATER BURNOUT ALARM Relay contact (SPST), 220 VAC/30 VDC, 1A OUTPUT (resistive load), PXW/Z-4 type: not available

FUNCTIONS

PARAMETER MASK Parameter display is disabled by software FUNCTION

RAMP/SOAK FUNCTION 4-ramp/4-soak

STRUCTURE

MOUNTING METHOD Panel mounting or surface mounting.

Surface mounting: PXW/Z-4 type only

EXTERNAL TERMINAL PXW/Z-4 Type: 8-pin or 11-pin socket.

Other Types: Screw terminal (M3.5 screw)

DIMENSIONS (WxHxD) PXW/Z-4: 1⁄16 DIN

1.89 x 1.89 x 3.37 in (48 x 48 x 85.7mm) PXW/Z-5: 1⁄8 DIN

2.07 x 3.96 x 3.77 in (52.5 x 100.5 x 95.8mm) PXW/Z-7: 72 mm

3.01 x 3.01 x 3.77 in (76.5 x 76.5 x 95.8mm) PXW/Z-9: 1⁄4 DIN

3.96 x 3.96 x 3.77 in (100.5 x 100.5 x 95.8mm)

PROTECTIVE STRUCTURE Front Panel: NEMA 4X (equivalent to IEC

standards IP66); protection against corrosion, windblown dust and rain, and hose directed water Rear Case: IEC IP20; protection against solid object up to 12 mm

INSTALLATION CATEGORY Category II POLLUTION DEGREE 2 UL FILE NO. E131280S

Information subject to change without notice. Prices in USD.

+ 1 hidden pages