Food Warmer Parts Manual
FWH-1, FWH-2, Hatco, ThermoGlo
Frymaster, a member of the Commercial Food Equipment Service Association, recommends
using CFESA Certified Technicians.
24-Hour Service
Hotline 1-800-551-
8633
OCT 12
NOTICE
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART F OR THIS MANITOWOC
EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED
DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS,
AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS
WARRANTY WILL BE VOID. FURTHER, FRYMASTER/DEAN AND ITS AFFILIAT ES WILL NOT BE
LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH
ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF
ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.
DANGER
Copper wire suitable for at least 167°F (75°C) must be used for power connections.
DANGER
The electrical power supply for this appliance must be the same as indicated on the
rating and serial number plate located on the inside of the fryer door.
DANGER
This appliance must be connected to the voltage and phase as specified on the rating
and serial number plate located on the inside of the fryer door.
DANGER
All wiring connections for this appliance must be made in accordance with the wiring
diagrams furnished with the equipment. Wiring diagrams are located on the inside of
the fryer door.
DANGER
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
WARNING
Do not use water jets to clean this equipment.
Table of Contents
Equipment Page Number
FWH-1, Merco Rod-Style 1
FWH-2, Bulb Style 2
Hatco 3
ThermoGlo 4
Inserts, Pans: 35/45/55 Gas, RE Electric, Protector 5
Inserts, Pans: MJCF, Filter Magic 6
55 Cabinet 7
35/45 Cabinet 8
RE Cabinet 9
Casters/Legs/Anchors 10
Heat Lamps/Food Warmers
FWH-1, Merco Rod-Style
1 807-4356 Food warmer, 120/60 825W
* 807-4402 Food warmer, 240V
* 807-1413 120V Switch, toggle, ON/OFF
* 807-1414 240V Switch, toggle, ON/OFF
* 807-1416 Power on indicator light, red
* 807-1417 120V cordset, 3 wire
* 807-4358 120V Element (tube) heating, 20 ¼”, 825W (screw-in)
* 807-4359 208/240 Element (tube) heating, 20 ¼” 825W (screw-in)
* 807-0746 120V Element (tube) heating, 20 ¼”, 825W (snap-in)
* 807-0748 208/240 Element (tube) heating, 20 ¼” 825W (snap-in)
* 807-1415 Socket, heating rod (snap-in)
* 807-3783 Switch, Dean
* 826-0990 Hardware kit
* 810-2389 Holder, Quartz Lamp, (snap-in) Dean
* 210-5717 Bracket, Heat Lamp
* 210-5716 Mount, Heat Lamp
1
1
FWH-2, Bulb Style
1 807-1575 120V Warmer, with support
* 807-1576 240V Warmer, with support
* 806-5278SP 120V Warmer kit, with mounting hardware
* 806-5285SP 240 Warmer Kit, with mounting hardware
* 807-3963 Socket, heating, bulb, 375W
* 807-3049 Bulb, 250W, 120V
* 807-3961 Bulb, 375W, 120V
* 807-3962 Bulb, 375W, 240V
* 826-1064 Hardware kit, (screws for attachment)
* 823-1896 Support, lamp, front/rear
* 807-3051 Cordset, in-line switch
* 826-1374 Screw, #10 (Qty:25)
Heat Lamps/Food Warmers
2