Frymaster FWH1 Parts List

Food Warmer Parts Manual

FWH-1, FWH-2, Hatco, ThermoGlo

Frymaster, a member of the Commercial Food Equipment Service Association, recommends
using CFESA Certified Technicians.

Hotline [phone]-

24-Hour Service

8633

*8196330*

JULY 2007

NOTICE

IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS ENODIS

EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED

DIRECTLY FROM FRYMASTER/DEAN, OR ANY OF ITS AUTHORIZED SERVICE CENTERS,

AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS

WARRANTY WILL BE VOID. FURTHER, FRYMASTER/DEAN AND ITS AFFILIAT ES WILL NOT BE

LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH

ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF

ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICE CENTER.

DANGER

Copper wire suitable for at least 167°F (75°C) must be used for power connections.

DANGER

The electrical power supply for this appliance must be the same as indicated on the

rating and serial number plate located on the inside of the fryer door.

DANGER

This appliance must be connected to the voltage and phase as specified on the rating

and serial number plate located on the inside of the fryer door.

DANGER

All wiring connections for this appliance must be made in accordance with the wiring

diagrams furnished with the equipment. Wiring diagrams are located on the inside of

the fryer door.

DANGER

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

WARNING

Do not use water jets to clean this equipment.

Heat Lamps/Food Warmers

FWH-1, Merco Rod-Style

Item

#

1 807-4356 Food warmer, 120/60 825W

* 807-4402 Food warmer, 240V
* 807-1413 120V Switch, toggle, ON/OFF

Part

Number

* 807-1414 240V Switch, toggle, ON/OFF
* 807-1416 Power on indicator light, red
* 807-1417 120V cordset, 3 wire
* 807-4358 120V Element (tube) heating, 20 ¼”, 825W (screw-in)
* 807-4359 208/240 Element (tube) heating, 20 ¼” 825W (screw-in)
* 810-2389 Holder, Quartz Lamp, (snap-in) Dean
* 807-0746 120V Element (tube) heating, 20 ¼”, 825W (snap-in)
* 807-0748 208/240 Element (tube) heating, 20 ¼” 825W (snap-in)
* 807-1415 Socket, heating rod (snap-in)
* 807-3783 Switch, Dean
* 826-0990 Hardware kit

Merco Rod-Style Warmer FWH-1

1

Description

1

FWH-2, Bulb Style

807-1576 240V Warmer, with support
806-5278SP 120V Warmer kit, with mounting hardware

807-1575 120V Warmer, with support

806-5285SP 240 Warmer Kit, with mounting hardware
807-3053 Socket, heating bulb, 250W
807-3963 Socket, heating, bulb, 375W
807-3049 Bulb, 250W
807-3961 Bulb, 375W
807-3962 Bulb, 375W
826-1064 Hardware kit, (screws for attachment)
823-1896 Support, lamp, front/rear
807-3051 Cordset, in-line switch
826-1374 Screw, #10 (Qty:25)

Heat Lamps/Food Warmers

Merco Bulb-Style Warmer, FWH-2

2

Heat Lamps/Food Warmers

Hatco Warmers

807-1371 120V Warmer assembly

807-3219 240V Warmer assembly

807-4695 220/230 CE Warmer assembly

807-4696 230/240 CE Warmer assembly

910-8627 Housing support
823-2834 Plate, mount with nut
826-0990 Mounting kit, hardware

-

Hatco Warmers

Frymaster Replacement Parts

Dean Replacement Parts

3

ThermoGlo Warmers

807-3353 240V Warmer
807-2082 Switch, rocker, power, ON/ OFF

806-8836SP 120V Warmer

826-1279 120V Warmer kit

807-1041 Switch, toggle, power, ON/OFF
806-7732SP Harness, wire

Heat Lamps/Food Warmers

ThermoGlo Warmers

4

THIS PAGE INTENTIONALLY LEFT BLANK.

Frymaster, L.L.C., 8700 Line Avenue, PO Box 51000, Shreveport, Louisiana 71135-1000

Shipping Address: 8700 Line Avenue, Shreveport, Louisiana 71106

TEL [phone] FAX (Parts) 1-318-688-2200 (Tech Support) 1-318-219-7135

PRINTED IN THE UNITED STATES

SERVICE HOTLINE

1-800-551-8633

819-6330

JULY 07