All about the
Use&Care
of your Refrigerator
TA B L E O F C O N T E N T S
Important Safety Instructions...................... |
2 |
Storage Features...................................... |
20 |
Features At A Glance - Baseline Model.......... |
4 |
Automatic Ice & Water Dispenser - |
|
Features At A Glance - Gallery/Pro Model |
5 |
Frigidaire Gallery (some models)................ |
21 |
Automatic Ice & Water Dispenser - |
|
||
Installation |
6 |
|
|
Frigidaire Gallery/Pro (some models).......... |
24 |
||
Door Removal Instructions........................... |
8 |
Changing the Filter - Frigidaire Gallery........ |
27 |
Handle Installation.................................... |
10 |
Changing the Filter - Frigidaire Pro............. |
29 |
Connecting the Water Supply..................... |
11 |
Normal Operating Sounds and Sights......... |
30 |
Controls - Frigidaire Gallery....................... |
13 |
Care & Cleaning........................................ |
31 |
Controls - Frigidaire & Frigidaire Gallery...... |
16 |
Before You Call......................................... |
35 |
Controls - Frigidaire Professional................ |
17 |
Major Appliance Warranty.......................... |
40 |
www.frigidaire.com USA 1-800-374-4432 |
www.frigidaire.ca Canada 1-800-265-8352 |
2018) (November A14788802
WARNING
Please read all instructions before using this refrigerator.
For your Safety
•DO NOT store or use gasoline, or other flammable liquids in the vicinity of this or any other appliance. Read product labels for warnings regarding flammability and other hazards.
•DO NOT operate the refrigerator in the presence of explosive fumes.
•Avoid contact with any moving parts of automatic ice maker.
•Remove all staples from the carton. Staples can cause severe cuts, and also destroy finishes if they come in contact with other appliances or furniture.
Definitions
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Installation Checklist
Doors
Handles are secure and tight
Door seals completely to cabinet on all sides
Freezer door is level across the top
Leveling
Refrigerator is level, side-to-side and tilted ¼” (6mm) front-to-back
Toe grille is properly attached to refrigeratorCabinet is setting solid on all corners
Electrical Power
House power turned onRefrigerator plugged in
Ice Maker
House water supply connected to refrigerator
No water leaks present at all connections - recheck in 24 hours
Ice maker is turned ON
Ice & water dispenser operates correctly
Front filter must be flush with filter housing (select models)
Final Checks
Shipping material removed
Fresh food and freezer temperatures setCrisper humidity controls setRegistration card sent in
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation or maintenance information which is important but not hazard-related.
Child Safety
Destroy or recycle the carton, plastic bags, and any exterior wrapping material immediately after the refrigerator is unpacked. Children should NEVER use these items to play. Cartons covered with rugs, bedspreads, plastic sheets or stretch wrap may become airtight chambers, and can quickly cause suffocation.
Proper Disposal of your Refrigerator or Freezer
Risk of child entrapment
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators or freezers are still dangerous
– even if they will sit for “just a few days”. If
2
IMPORTANT SAFETY INSTRUCTIONS
you are getting rid of your old refrigerator or freezer, please follow the instructions below to help prevent accidents.
Proper Disposal of Refrigerators/Freezers
We strongly encourage responsible appliance recycling/disposal methods. Check with your utility company or visit www.energystar.gov/recycle for more information on recycling your old refrigerator.
Before you throw away your old refrigerator/freezer:
• Remove doors.
• Leave shelves in place so children may not easily climb inside.
• Have refrigerant removed by a qualified service technician.
refrigerator to a Ground Fault Interrupter (GFI) circuit. Do not use an extension cord or adapter plug.
•If the power cord is damaged, it should be replaced by an authorized service technician to prevent any risk.
•Never unplug the refrigerator by pulling on the power cord. Always grip the plug firmly, and pull straight out from the receptacle to prevent damaging the power cord.
•Unplug the refrigerator before cleaning and before replacing a light bulb to avoid electrical shock.
•Performance may be affected if the voltage varies by 10% or more. Operating the refrigerator with insufficient power can damage the compressor. Such damage is not covered under your warranty.
•Do not plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally.
IMPORTANT
CFC/HCFC Disposal
Your old refrigerator may have a cooling system that used CFCs or HCFCs (chlorofluorocarbons or hydrochlorofluorocarbons). CFCs and HCFCs are believed to harm stratospheric ozone if released to the atmosphere. Other refrigerants may also cause harm to the environment if released to the atmosphere.
If you are throwing away your old refrigerator, make sure the refrigerant is removed for proper disposal by a qualified technician. If you intentionally release refrigerant, you may be subject to fines and imprisonment under provisions of environmental legislation.
WARNING
These guidelines must be followed to ensure that safety mechanisms in this refrigerator will operate properly.
Electrical information
•The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances. Consult
a qualified electrician. Avoid connecting
IMPORTANT
Pressing and holding the On/Off button for three seconds, located on the temperature control panel (Electronic controls), or turning the Freezer and Fresh Food controls to “0” (Mechanical controls) will disable your refrigerator’s cooling system, but does not disconnect the power to the lighting system and other electrical components. To turn off power to your refrigerator you must unplug the power cord from the electrical outlet.
Grounding type wall receptacle
Do not, under any circumstances, cut, remove, or bypass the grounding prong.
Power cord with 3-prong gounded plug
CAUTION
To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
3
Features may vary according to model
Ice Cream Shelf |
Water Filter |
CAUTION: |
|
Ice Maker |
(Location varies by model) |
||
|
|
Do Not Remove |
|
|
|
Magnet Behind |
|
Door Bin |
|
Dairy |
|
|
LED Lights |
Compartment |
|
Ice |
Dairy |
||
|
|||
Container |
|
Compartment |
|
|
|
Glass Shelf |
|
Shelf |
|
Door Bin |
|
|
|
Glass Shelf |
|
|
|
Door Bin |
|
|
|
Glass Shelves |
|
Door Bins |
|
Fixed |
|
|
Door Bin |
||
|
|
Crisper Pan |
|
|
|
and Cover |
|
|
|
Fixed |
|
|
|
Door Bin |
|
Slide Out Basket |
Toe Grille |
|
IMPORTANT
Features not included with your refrigerator can be purchased at www.frigidaire.com or by calling 1-800-374-4432.
4
Features may vary according to model
Pizza Shelf |
Air Filter |
Water Filter |
Slim Ice Maker |
Tinted |
|
|
Door Bin |
Tinted Dairy |
|
|
Compartment |
|
|
Tinted |
|
|
Door Bin |
|
Shelves |
Shelves |
|
|
Tinted |
|
|
Door Bin |
|
Tinted |
Tinted |
|
Door Bin |
Door Bin |
|
Large |
Tinted Deli |
|
Glide Out |
Drawer |
|
Basket |
Can Rack |
|
Tinted |
||
Tinted Chill |
||
Door Bin |
||
Large |
Drawer |
|
Tinted Crisper |
||
Basket |
||
Tinted |
Pan |
|
|
||
Door Bin |
|
|
Toe Grille |
Tinted |
|
Door Bin |
IMPORTANT
Features not included with your refrigerator can be purchased at www.frigidaire.com or by calling 1-800-374-4432.
5
This Use & Care Guide provides general operating instructions for your model. Use the
refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps.
Location
•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.
•If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.
•The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.
•Consider water supply availability for models equipped with an automatic ice maker. If you do not hook up water to the refrigerator, remember to turn the ice maker off.
CAUTION
Do Not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.
Installation
Installation clearances
Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:
Sides & Top |
⅜ inch |
Back |
1 inch |
NOTE
If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.
Toe Grille Installation and Removal
To install toe grille
1.Open both doors. Slide left and right sides of toe grille over lower hinges of refrigerator.
2.While pushing toe grille firmly against cabinet, fasten bottom clips of toe grille to cabinet.
3.Fasten top clips to cabinet.
4.Close the doors. Fasten right and left side clips into groove of bottom hinge.
|
Installing Toe Grille |
|
|
1 3 |
4 |
4 |
|
|
2 |
3 |
|
|
|
|
|
|
2 |
|
|
1 |
To remove toe grille
1.With both doors closed, unfasten right and left side clips of toe grille from bottom hinge groove.
2.Open both doors. Press firmly on top of toe grille until top of toe grille pops off.
3.Pull toe grille outward toward your body and off of lower hinges.
Removing Toe Grille
1
2
1 3 2
3
6
Door Opening
NOTE
The refrigerator doors are designed to shut by themselves within a 20 degree opening.
Your refrigerator should be positioned to allow easy access to a counter or table when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.
Guidelines for final positioning of your refrigerator:
•All four corners of the cabinet must rest firmly on the floor.
•The cabinet should be level at the front and rear.
•The sides should tilt ¼ inch (6 mm) from front to back (to ensure that doors close and seal properly).
•Doors should align with each other and be level.
All of these conditions can be met by raising or lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1.Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in the “Installation” section).
2.Close the doors and use a flat-blade screwdriver or ⅜ inch socket wrench to raise or lower the front rollers.
3.Ensure both doors are bind-free with their seals touching the cabinet on all 4 sides.
Raise
INSTALLATION
To level the doors using the adjustable lower hinge (some models):
1.Before leveling either door, remove set screw that locks door height into position. (The door cannot be adjusted without set screw removed).
2.If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)
3.If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)
Door Door
Raise |
Raise |
Door |
Door |
4.After leveling, verify door stop contacts lower hinge and top of door does
not contact upper hinge through full movement of door (from fully closed to fully open).
5.Reinstall set screw, locking the door height.
Door Stop |
Open Door |
|
|
Flange |
Hinge Flange |
|
Set Screw
(some models)
Hinge
7/16" Wrench and
3/32" Hex Key (some models)
6.Replace the toe grille by fitting it into place (see “Toe Grille Installation and Removal” in the “Installation” section).
7
Tools Necessary: |
||
Phillips™ |
|
|
Head |
|
|
|
or |
|
Socket |
Adjustable |
|
Wrench Set |
Wrench |
|
or |
|
|
3/8" Fixed |
|
|
Wrench |
|
|
Top Hinge |
Top Hinge |
|
Cover Front |
Cover Rear |
|
Screw |
Screw |
|
Top |
Bottom |
|
Hinge |
||
Hinge |
||
Screw |
||
Screw |
||
|
To prepare for removing the doors:
1.Make sure the electrical power cord is unplugged from the wall outlet.
2.Open both doors and remove the toe grille (as explained in the Installation Instructions that came with your appliance).
3.Remove any food from the door shelves.
4.Close the doors.
To remove the refrigerator top hinge cover:
5.Remove the 3 screws from each cover over the top door hinges.
6.Lift hinge cover straight up and off.
Rear Cover |
Front Cover |
Screw |
Screws Top |
|
|
|
Hinge |
|
Cover |
|
Hinge |
|
Screws |
|
Top |
|
Hinge |
To remove the refrigerator door:
1.Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.
2.Remove the 2 screws from the top hinge. Lift the door off of the bottom hinge and set it aside.
8
DOOR REMOVAL INSTRUCTIONS
1.Remove the 2 bottom hinge screws and hinge if necessary.
Door
Hinge
Assembly
Closer
Pin
Screws |
Hinge |
Adjustable Hinge (some models)
To reinstall the refrigerator door, reverse the above steps.
To remove the freezer top hinge cover:
1.Remove the 2 screws from each cover over the top door hinges.
2.Lift hinge cover straight up and off.
Front |
Rear Cover |
|
Cover Screws |
||
Screw |
||
Top Hinge |
||
|
||
Cover |
|
|
Hinge |
|
|
Screws |
|
|
Multi-Wire |
|
|
Cable |
|
|
|
Top |
|
|
Hinge |
To remove the freezer door:
1.Detach the multi-wire cable
connector located above the top hinge. Grasp both sides of the connector firmly and pull apart.
2.Trace lightly around the hinge with a pencil. This makes reinstallation easier.
3.Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.
4.Remove the screws from the top hinge and pull the multi-wire cable through it. Lift the door off of the bottom hinge.
5.Remove the 2 bottom hinge screws and hinge if necessary.
To Disconnect
1.Press outer ring against face of fitting
2. Pull to |
remove tube |
To Connect |
Insert tube and push until mark touches face of fitting
|
|
Door |
|
Closer |
|
|
Water |
Pin |
|
Line |
|
|
|
||
|
|
Hinge |
Tubing |
Hinge |
|
Screws |
|
|
Assembly |
Adjustable Hinge (some models)
Door
Water
Hinge
Line
Tubing
Assembly Screws
Non-Adjusting Hinge (some models)
6.Lay the door on its side to avoid damage to the water tube extending from the bottom hinge.
To reinstall the freezer door, reverse the above steps.
CAUTION
Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.
9
CAUTION
Wear gloves and safety goggles and use extreme CAUTION when installing these handles. The rounded end of the handles may be sharp (some models).
IMPORTANT
To ensure proper installation of handles, please review these instructions and illustrations thoroughly prior to installing the handles.
1.Remove handles from protective packaging.
2.Position freezer handle end caps over upper and lower pre-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the refrigerator door.
3.While holding handle firmly against door, fasten furthermost upper and furthermost lower Allen set screws
(B) with supplied Allen wrench.
Frigidaire Professional®
Freezer Upper |
Refrigerator Upper |
End Cap |
End Cap |
A |
A |
|
|
B |
B |
B |
B |
A |
A |
Freezer Lower |
Refrigerator Lower |
End Cap |
End Cap |
Frigidaire Gallery®
4. Firmly tighten the inside Allen |
Freezer Upper |
Refrigerator Upper |
set screws. |
End Cap |
End Cap |
5. Repeat steps 2 through 4 to install |
|
|
refrigerator handle. Ensure the |
|
|
holes for the set screws are facing |
|
|
towards the freezer door. |
|
|
NOTE |
|
|
All set screws should be tightened and |
|
|
sub-flush (Allen set screw should be |
|
|
seated just below the surface of the |
|
|
end cap) of handle end cap. The end |
|
|
caps should be drawn tight to freezer |
|
|
and refrigerator doors with no gaps. |
|
|
|
Freezer Lower |
Refrigerator Lower |
|
End Cap |
End Cap |
Ensure Handle Set Screws |
|
|
are Facing Each Other |
|
|
with Doors Closed |
|
|
10
WARNING
To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.
CAUTION
To Avoid Property Damage:
•Copper or Stainless Steel braided tubing is recommended for the water supply line.
Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.
•DO NOT install water supply tubing in areas where temperatures fall below freezing.
•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.
IMPORTANT
Ensure that your water supply line connections comply with all local plumbing codes.
Before Installing The Water Supply Line,
You Will Need:
•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver
•Access to a household cold water line with water pressure between 30 and 100 psi.
•A water supply line made of ¼ inch (6.4 mm) OD, copper or stainless steel
tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
•A shutoff valve to connect the water supply line to your household water system. Do not use a self-piercing type shutoff valve.
•Do not reuse compression fitting or use thread seal tape.
•A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.
NOTE
Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/ state building codes, Frigidaire recom-
mends for homes with existing valves its Smart Choice® water line kit 5304490728
(with a 6 ft. Stainless Steel Water Line) or 5304493869 (with a 6 ft. Polyline Water Line) and for homes without an existing
valve, Frigidaire recommends its Smart Choice® water line kit 5304490717 (with
a 20 ft. copper water line with self-tapping saddle valve). Please refer to www.frigidaire.com/store for more information.
To Connect Water Supply Line To Ice
Maker Inlet Valve
1.Disconnect refrigerator from electric power source.
2.Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shutoff valve.
3.Remove plastic cap from water valve inlet and discard cap.
4.If you use copper tubing - Slide brass compression nut, then ferrule (sleeve) onto water supply line. Push water supply line into water valve inlet as far as it
will go (¼ inch/6.4 mm). Slide ferrule
(sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT overtighten. See Figure 1.
If you use braided flexible stainless steel or polyline tubing - The nut is already assembled on the tubing. Slide nut onto valve inlet and finger tighten nut onto valve. Tighten another half turn with a wrench; DO NOT overtighten. See Figure 2.
11
CONNECTING THE WATER SUPPLY
Plastic Water |
Steel |
Tubing to Ice |
Clamp |
Maker Fill |
Brass |
Tube |
Compression |
|
Nut |
|
Ferrule |
|
(Sleeve) |
|
Copper |
|
water line |
|
Water Valve |
|
Bracket |
|
Valve Inlet |
|
Water Valve |
|
Copper water line |
|
from household |
|
water supply |
(Include enough tubing in loop to allow moving refrigerator out for cleaning.)
Figure 1
Plastic Water Tubing |
Steel |
to Ice Maker |
|
Fill Tube |
Clamp |
|
Water Line |
|
Water Valve |
|
Bracket |
|
Valve Inlet |
|
Water Valve |
Water line
from household water supply
(Include enough tubing in loop to allow moving refrigerator out for cleaning.)
Figure 2
5.With steel clamp and screw, secure water supply line (copper tubing only) to rear panel of refrigerator as shown.
6.Coil excess water supply line (copper tubing only), about 2½ turns, behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.
7.Turn ON water supply at shutoff valve and tighten any connections that leak.
8.Reconnect refrigerator to electrical power source.
9.To turn ice maker on, lower wire signal arm (side mounted) or set the ice maker’s On/Off power switch to the “I” position (rear mounted).mounted).
IMPORTANT
After connecting the water supply, refer to “How to Prime the Water Supply System” for important information about priming an empty water supply system.
To ensure that your water dispenser works properly, the water supply system must be completely filled with water when your refrigerator is first connected to the household water supply line.
12