FRIGIDAIRE
TABLE OF
Important Safety Instructions ................................. 2
Installation ........................................................... 4
Door Reversal Instructions ..................................... 5
Energy Saving Tips ................................................ 6
www.frigidaire.com USA 1-800-944-9044 www.frigidaire.ca Canada 1-800-265-8352
CONTENTS
Temperature Controls ............................................ 7
Features ............................................................... 8
Care and Cleaning ................................................ 9
Before you Call.................................................... 10
Major Appliance Warranty .................................... 12
i_J
Co
o
o
Read and Save These Instructions
This Owner's Guide provides specific operating
instructions for your model, Use your Wine Cooler only
as instructed in this guide. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
)racticed when installing, operating, and maintaining any
appliance.
Record Your Model and Serial Numbers
Record the model and serial numbers in the space
)rovided below. The serial plate is located on the upper
left wall inside the Wine Cooler.
Hodel Number:
Serial Number:
Purchase Date:
Please read all instructions before using this Beverage
Cooler.
Definitions
_'_ This isthe safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
IMPORTANT indicates installation, operation or
maintenance information which is important but not
hazard-related.
_ DANGER
DANGER Risk of fire or explosion.Flammable
refrigerant used. Do not use mechanical devices to
defrost refrigerator. Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion.Flammable
refrigerant used.To be repaired only by trained service
oersonnel. Do not puncture refrigerant tubing.
_ CAUTION
CAUTION Risk of fire or explosion.Flammable
refrigerant used.Consult repair manual/owner_ guide
before attempting to service this product. All safety
precautions must be followed.
CAUTION Risk of fire or explosion.Dispose of property
in accordance with federal or local regulations.
Flammable refrigerant used.
CAUTION- Risk of fire or explosion due to puncture of
refrigerant tubing ;Follow handling instructions
carefully. Flammable refrigerant used.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
........!nj,ry:......................................................................................................................................................................................................................................................................................................................
Electrical Information
The wine cooler must be plugged into its
own dedicated 115 Volt, 60 Hz., 15 Amp,
AC only electrical outlet. The power cord of
the appliance isequipped with a three-prong
grounding plug for your protection against
electrical shock hazards, tt must be plugged
directly into a properly grounded three prong
receptacle. The receptacle must be installed in
accordance with local codes and ordinances.
Consult a qualified electrician. Avoid connecting
refrigerator to a Ground Fault tnterruptor (GFT)
circuit. Do not use an extension cord or
. adapterplug.
If the power cord is damaged, it should be
replaced by an authorized service technician to
prevent any risk.
o Never unplug the wine cooler by pulling on the
power cord. Always grip the plug firmly, and
pull straight out from the receptacle to prevent
damaging the power cord.
Unplug the wine cooler before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies
by 10% or more. Operating the wine cooler with
insufficient power can damage the compressor.
Such damage is not covered under your warranty.
Do not plug the unit into an electrical outlet
controlled by a wall switch or pull cord to prevent
the wine cooler from being turned off accidentally.
Grounding type
wall receptacle
DO not, under
any circumstances
CUt, remove_
or bypass the
grounding prong.
J
Child Safety
o
Destroy carton, plastic bags, and any exterior
wrapping material immediately after the wine
cooler is unpacked. Children should never use
these items to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap may
become airtight chambers, and can quickly cause
suffocation.
• Remove all staples from the carton. Staples can
cause severe cuts, and destroy finishes if they
come in contact with other appliances or furniture.
• An empty, discarded wine cooler is a very
dangerous attraction to children.
• Remove the door(s) of any appliance that is not in
use, even if it is being discarded.
Proper Disposal of your Wine Cooler
Risk of child entrapment
Child entrapment and suffocation are not problems of
the past. Junked or abandoned wine coolers are still
dangerous - even if they will sit for "just a few days':
If you are getting rid of your old wine cooler, please
follow the instructions below to help prevent accidents.
We strongly encourage responsible appliance recycling/
disposal methods. Check with your utility company or
visit www.recyclemyoldfridge.com for more information
on recycling your old wine cooler.
Before you throw away your old wine cooler"
- Remove doors.
ii
Leave shelves in place so children may not easily
ii
climb inside.
ii
Have refrigerant removed by a qualified service
ii
technician.
Power cord with
3-prong grounded plug
This Use & Care Guide provides general operating
instructions for your model. Use the appliance only as
instructed in this Use & Care Guide. Before starting the
wine cooler, follow these important first steps,
Location
o Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an adapter
plug.
For optimal performance, it is recommended that
you install the wine cooler where the ambient
temperature is between 70 and 78 degrees
fahrenheit.
- Allow space around the unit for good air circulation.
Leave a 2 inch space on the back and sides of the
wine cooler for adequate circulation.
- Be sure the wine cooler stays in the upright position
during transport.
- Keep the wine cooler from any hazardous or
combustible agents.
The exterior walls of the wine cooler may become quite
warm as the compressor works to transfer heat from
the inside. Temperatures as much as 30° F warmer
than room temperature can be expected. For this
reason it is particularly important in hotter climates to
allow enough space for air circulation around your wine
cooler.
Cleaning
®
Wash any removable parts of the wine cooler interior
and exterior with mild detergent and warm water.
Wipe dry. Do not use harsh cleaners on these
surfaces.
®
Do not use razor blades or other sharp instruments,
which can scratch the appliance surface when
removing adhesive labels. Any glue left from the tape
can be removed with a mixture of warm water and
mild detergent, or touch the residue with the sticky
side of tape already removed. Do not remove the
serial plate.
Important Safeguards: Do not store food in your wine
cooler as interior temperature may not get cool enough
to prevent spoilage. [n summer months or areas of high
humidity, the glass door may build up moisture. To
remove the moisture, wipe it away.
Handle Installation
1. Set handle over the two mounting studs at top of
door.
2. Use hex head screw driver or allen wrench to tighten
set screws from bottom to secure handle to door.
Mounting stud
Locate handle
Leveling
The wine cooler must have all bottom corners resting
firmly on solid floor. The floor must be strong enough
to support a fully loaded wine cooler. NOTE: It is Very
Important for your wine cooler to be level in order to
function properly. If the wine cooler is not leveled during
installation, the door may be misaligned and not close
or seal properly, causing cooling, frost, or moisture
problems.
To Level Your Wine Cooler"
After removing all interior and exterior packaging
materials, use a carpenter's level to level the wine cooler
from front-to-back. Adjust the leveling legs in front, 1/2
bubble higher, so that the door closes easily when left
halfway open.
Set screw
Screw driver