Frigidaire FFPA1422T1, FFPH1222T1, FFPA1222T1, FFPH1422T1, FFPA0822T1 Owners Manual
Important Safety Instructions..............................2-3
Product Registration...............................................4
Normal Sounds.......................................................4
Unit Description......................................................5
Accessories Included.............................................5
Installation Instructions.......................................6-7
Air Conditioner Features.....................................8
Operating Instruction......................................8-16
Care and Cleaning.............................................17
Before You Call..................................................18
Major Appliance Limited Warranty................. ...19
Important Safety Instructions
NOTE:
NOTE:
WARNING
SAFETY PRECAUTIONS
WARNING
WARNING
WARNING
SAFETY PRECAUTIONS
Important Safety Instructions
NOTE:
Product Registration & Normal Sounds
Product Registration
Normal Sounds
Sound of Rushing Air
At the top of the unit, you may
hear the sound of rushing air
being moved by the fan.
High pitched Chatter
Today’s high efficiency
compressors may have a
high pitched chatter during
the cooling cycle.
Record Your Model and Serial Numbers
Record in the space provided below the mode and serial numbers. On all models, the
serial plate is located on the side of the cabinet.
Model No.
Serial No.
Register Your Product
The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to the Frigidaire Company.
Gurgle/Hiss
“Gurgling or hissing” noise may be
heard due to refrigerant passing
through evaporator during normal
operation.
Vibration
Unit may vibrate and make noise
because of uneven floor.
Unit Description
Unit Description & Accessories Included
Air Outlet Grill
Signal
Receiver
Remote
Control
Control Panel
Castor
Accessories Included
PARTS: PARTS NAME:
Carrying
Handle
Exhaust
Air
Power cord
(FFPA1222T1、FFPH1222T1
FFPA1422T1、FFPH1422T1)
Window Kit Connector A
Exhaust hose connector B
(FFPA1222T1、FFPH1222T1
FFPA1422T1、FFPH1422T1)
Exhaust hose connector B
(FFPA0822T1、FFPA1022T1)
Window Kit
Exhaust Hose
Safety Lock
Foam seal A
Foam seal B
Screws
Bolts
Continuous
Drain Outlet
Air Intake
Bottom
Drain Outlet
Power
Cord
(FFPA0822T1、FFPA1022T1)
QUANTITY:
( )
+
( )
Continuous
Drain Outlet
Air Intake
Bottom
Drain Outlet
Remote Control
Battery
Installation Instructions
Lock
Slide onto
1
2
Slide onto
Installation Instructions
EXHAUSTING HOT AIR
In the Cool Mode the appliance must be placed close to a
window or opening so that the warm exhaust air can be ducted
outside.
First position unit on a flat floor and make sure there’s a minimum
of 12″clearance around the unit, and is within the vicinity of a
single circuit outlet power source.
1. Extend either side of the hose(Fig.1) and screw the hose to
connector A (Fig.2).
2. Extend the other side of the hose and screw it to connector B
(Fig. 3).
3. Install the connector B into the unit (Fig.4).
4. Affix the connector A into the window slider kit and seal.
(Fig.5&6)
Vertical
window
Extend the side of hose
FFPA0822T1、FFPA1022T1
Fig.1
Fig.2
Fig.3
Window Slider Kit
Minimum:26.6
Ma mum:48 5 (123cm)
x .
″
(67.5cm)
″
Fig.5
Horizontal
window
Window Slider Kit
Minimum:26.6
Ma mum:48 5 (123cm)
The hose can be extended from its original length of 15 up to
59″,but it is the best to keep the length to minimum required.
Also make sure that the hose does not have any sharp bends
or sags.(Fig.7)
x .
″
(67.5cm)
″
Fig.6
Fig.7
FFPA1222T1、FFPH1222T1
FFPA1422T1、FFPH1422T1
Fig.4
″
FFPA0822T1、FFPA1022T1
FFPA1222T1、FFPH1222T1
FFPA1422T1、FFPH1422T1
Loading...