Remove transport packaging
tape on the left and right side of the door. You can remove any remnants of adhesive using
white spirit. Remove all adhesive tape and packing pieces from the interior of the appliance.
The appliance and the interior fittings are protected for transportation. Pull off the adhesive
Installation
Before installing, carefully read the instruction in order to avoid a certain number of problems.
Positioning
Position the appliance away from sources of heat such as stoves, radiators, direct sunlight
etc. Maximum performance and safety are guaranteed by maintaining the correct indoor
temperature for the class of unit concerned, as specified on the rating plate. This application
perform well from N to ST. The Appliance may not work properly if it is left for a longer
period at a temperature above or below the indicated range.
IMPORTANT! - There is a need of good ventilation around the fridge for easy dissipation
of heat, high efficiency of refrig eration and low power consumption. For this purpose,
sufficient clear space should be available around the fridge. It is advisable for there to be
75mm separating the back of the fridge to the wall, at least 100mm of space at its two sides,
height of over 100mm from its top and a clear space upfront to allow the doors to open 160.
Installation Location
Climate class
Ambient temperature
SN
to
10
C
+
32
C
+
N
ST
T
to
16
C
+
32
C
+
to
16
C
+
38
C
+
to
16
C
+
43
C
+
lower rear section of appliances, as poor air circulation can affect performance. Built-in
appliances should be positioned away from heat sources such as heaters and direct sunlight.
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the
6
house fuse or switch off the circuit breaker.
When unplugging always pull the plug from the mains socket, do not pull on the cable.
In case of malfunction
If a malfunction occurs on the appliance, please look first in the “ Troubleshooting ” section of
these instructions. If the information given there does not help, please do not perform any
further repairs yourself.
Before cleaning the appliance, always switch off the appliance and unplug it, or pull the